Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
If the user configures some command that is already in the config we
should return CMD_WARNING instead of CMD_WARNING_CONFIG_FAILED
vty_frame() can be used to reduce the amount of output produced by "show
running-config" and "write ...". It buffers output in struct vty->frame
(1024 bytes) and outputs it when vty_out is called. If vty_out isn't
called, it can be removed with vty_endframe() later.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This allows running the daemons inside of Linux network namespaces
without messing with an additional mount/fs namespace (or a ton of
options).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This uses zmq_getsockopt(ZMQ_FD) to create a libfrr read event, which
then wraps zmq_poll and calls an user-specified ZeroMQ read handler.
It's wrapped in a separate library in order to make ZeroMQ support an
installation-time option instead of build-time.
Extended to support per-message and per-fragment callbacks as discussed
with Bingen in PR #566.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
blackhole support was horribly broken. cleanup by removing blackhole
stuff from ZEBRA_FLAG_*
introduces support for "prohibit" routes (Linux/netlink only)
also clean up blackhole options on "ip route" vty commands.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
FLAG_BLACKHOLE is used for different things in different places. remove
it from the zclient API, instead indicate blackholes as proper nexthops
inside the message.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Specifically, gcc 4.2.1 on OpenBSD 6.0 warns about these; they're bogus
(gcc 4.2, being rather old, isn't quite as "intelligent" as newer
versions; the newer ones apply more logic and less warnings.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In certain situations, the CLI matcher would not handle ambiguous
commands properly. If it found an ambiguous result in a lower subgraph,
the ambiguous result would not correctly propagate up to previous frames
in the resolution DFS as ambiguous; instead it would propagate up as a
non-match, which could subsequently be overridden by a partial match.
Example CLI space:
show ip route summary
show ip route supernet-only
show ipv6 route summary
Entering `show ip route su` would result in an ambiguous resolution for
the `show ip route` subgraph but would propagate up to the `show ip`
subgraph as a no-match, allowing `ip` to partial-match `ipv6` and
execute that command.
In this example entering `show ip route summary` would disambiguate the
`show ip` subgraph. So this bug would only appear when entering input
that caused ambiguities in at least two parallel subgraphs.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add the RMAP_COMPILE_SUCCESS and switch over to using it.
Refactoring allows a removal of a if statement to just
use the switch statement already in place. Additionally
the reworking cleans up memory freeing in a couple of spots.
In one spot we no longer will leak memory too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set default hostname in frr to unix hostname.
Provide APIs to get the hostname/domaninanme
Use this APIs where needed
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
If we assign MULTIPATH_NUM to be 256, this causes issues
for us since 256 is bigger than a u_char. So let's make
the api's multipath_num to be a u_int16_t and pass it
around as a word.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With prefix_ptr or prefix_ls, there can still be stuff in a struct
prefix that we shouldn't hash.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Also fixes misuse of vector_slot() - that one doesn't check for access
beyond end of vector...
And print node names in grammar sandbox "printall".
Fixes: #543
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Register add/delete hooks with the prefix list code to properly change
ospf6_area's prefix list in/out pointers.
There are 2 other uncached uses of prefix lists in the ASBR route-map
code and the interface code; these should probably be cached too. (To
be fixed another day...)
Fixes: #453
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
if we're using --terminal, the daemon may in some cases exit fast enough
for the parent to see this; this resulted in a confusing/bogus "failed
to start, exited 0" message.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
adds a new all-daemon "debug memstats-at-exit" command. Also saves
memstats to a file in /tmp, useful if a long-running daemon is having
weird issues (e.g. in a user install).
Fixes: #437
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
As noticed in 657cde1, the zapi_ipv[4|6]_route functions are broken in
many ways and that's the reason that many client daemons (e.g. ospfd,
isisd) need to send handcrafted messages to zebra.
The zapi_route() function introduced by Donald solves the problem
by providing a consistent way to send ipv4/ipv6 routes to zebra with
nexthops of any type, in all possible combinations including IPv4 routes
with IPv6 nexthops (for BGP unnumbered routes).
This patch goes a bit further and creates two new address-family
independent ZAPI message types that the client daemons can
use to advertise route information to zebra: ZEBRA_ROUTE_ADD and
ZEBRA_ROUTE_DELETE. The big advantage of having address-family independent
messages is that it allows us to remove a lot of duplicate code in zebra
and in the client daemons.
This patch also introduces the zapi_route_decode() function. It will be
used by zebra to decode route messages sent by the client daemons using
zclient_route_send(), which calls zapi_route_encode().
Later on we'll use this same pair of encode/decode functions to
send/receive redistributed routes from zebra to the client daemons,
taking the idea of removing code duplication to the next level.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch introduces the following changes to the zapi_route structure
and associated code:
* Use a fixed-size array to store the nexthops instead of a pointer. This
makes the zapi_route() function much easier to use when we have multiple
nexthops to send. It's also much more efficient to put everything on
the stack rather than allocating an array in the heap every time we
need to send a route to zebra;
* Use the new 'zapi_nexthop' structure. This will allow the client daemons
to send labeled routes without having to allocate memory for the labels
(the 'nexthop' structure was designed to be memory efficient and doesn't
have room for MPLS labels, only a pointer). Also, 'zapi_nexthop' is more
compact and more clean from an API perspective;
* Embed the route prefix inside the zapi_route structure. Since the
route's prefix is sent along with its nexthops and attributes, it makes
sense to pack everything inside the same structure.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
route_node->lock is "const" if --enable-dev-build is used. This is done
to deter people from messing with internals of the route_table...
unfortunately, the inline'd route_[un]lock_node runs into this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
