Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This patch addresses following bug fixes
- Fix vtysh doc string in "show evpn access-vlan..." command
- Multicast group handling was little complex. This change avoids calling
multiple functions and directly calls the zebra_vxlan_if_update_vni for
mcast group updates.
- When a vlan-vni map is removed, the removed vni deletion was happening
in FRR with SVD config. This was resulting in stale vni and not
resulting propagation of the vni deletion.
During vni cleanup (zebra_vxlan_if_vni_clean) zebra_vxlan_if_vni_del
was called for vni delete which is not correct. We should be calling
zebra_vxlan_if_vni_entry_del for the given vni entry.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
Multiple vlan aware bridge data structure changes and its corresponding bridge
handling changes.
A new vlan-table is maintained for each bridge which records the zebra_l2_bridge_vlan
entry. zebra_l2_bridge_vlan maps vlan to access_bd associated to this bridge.
Existing zebra_evpn_access_bd structure is vlan aware which is now modified to be
(vlan, bridge) aware.
Whenever a new access_bd is instantiated, a corresponding entry is also recorded
in the zebra l2 bridge for the vlan.
When the access_bd is dereferenced or whenever a bridge is deleted, the
association is cleaned up.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
Add affinity-map hooks to check the utilization of affinity-map in
link-params before its deletion and to update link-params when the
affinity-map bit-position is updated.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the affinity-map global command to zebra. The syntax is:
> affinity-map NAME bit-position (0-1023)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
1. Renamed "gates" to "nexthops"
2. Displaying afi of the nexthops being dispalyed in place of
"nexthops" JSON object in the old JSON output
3. Calling show_route_nexthop_helper() and show_nexthop_json_helper()
instead of print_nh() inorder to keeps the fields in "nexthops"
JSON object in sync with "nexthops" JSON object of
"show nexthop-group rib json".
Updated vtysh:
r1# show ip nht
192.168.0.2
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
192.168.0.4
resolved via connected
is directly connected, r1-eth0 (vrf default)
Client list: static(fd 28)
Updated JSON:
r1# show ip nht json
{
"default":{
"ipv4":{
"192.168.0.2":{
"nhtConnected":false,
"clientList":[
{
"protocol":"static",
"socket":28,
"protocolFiltered":"none"
}
],
"nexthops":[
{
"flags":3,
"fib":true,
"directlyConnected":true,
"interfaceIndex":2,
"interfaceName":"r1-eth0",
"vrf":"default",
"active":true
}
],
"resolvedProtocol":"connected"
}
}
}
}
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
New show command "show evpn mac vni xx detail [json]"
to display details of all the mac entries for the
requested VNI.
Output of show evpn mac vni xx detail json:
{
"numMacs":2,
"macs":{
"ca:be:63:7c:81:05":{
"type":"local",
"intf":"veth100",
"ifindex":8,
"uptime":"00:06:55",
"localSequence":0,
"remoteSequence":0,
"detectionCount":0,
"isDuplicate":false,
"syncNeighCount":0,
"neighbors":{
"active":[
"fe80::c8be:63ff:fe7c:8105"
],
"inactive":[
]
}
}
}
}
Also added remoteEs field in the JSON output of
"show evpn mac vni xx json".
Output of show evpn mac vni xx json:
"00:02:00:00:00:0d":{
"type":"remote",
"remoteEs":"03:44:38:39:ff:ff:02:00:00:02",
"localSequence":0,
"remoteSequence":0,
"detectionCount":0,
"isDuplicate":false
}
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Volta submitted notification changes for the dplane that had a
special use case for their system. Volta is no more, the code
is not being actively developed and from talking with ex-Volta
employees there is no current plans to even maintain this code.
Wrap the special handling of nexthops that their asic-dataplane
did in a bit of code to isolate it and allow for future removal,
as that I do not actually believe anyone else is using this code.
Add a CPP_NOTICE several years into the future that will tell us
to remove the code. If someone starts using it then they will
have to notice this variable to set it and hopefully they will
see my CPP_NOTICE to come talk to us. If this is being used then
we can just remove this wrapper.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
FRR does not use the NLM_F_APPEND semantics ( in fact I would argue that
the NLM_F_APPEND semantics just introduce pain for all parties involved )
I would also argue that most people who use the kernel netlink api
have recognized that NLM_F_APPEND for a route is a recipe for disaster
that is well documented and as such it is not used as anything other
than a curiousity by operators.
See:
https://bugzilla.redhat.com/show_bug.cgi?id=1337855https://github.com/thom311/libnl/issues/226
Are 2 great examples of how confusing it is for anyone in user
space to know what the correct thing to do is. Given that
new fields can be added with no semantics to allow us to know
what has resulted in a change or not.
In an attempt to recognize this, let's note that FRR
believes it has gotten out of sync with the kernel.
Future commits will react to the desynchronized route
and request from the kernel a reload of that specific
route if possible.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use "get" as the name for checking the status of the bgp
accept lower seq knob. This already has an equivalent "set"
so makes sense to keep it consistent.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a knob to accept lower seq number in evpn updates
from BGP in Zebra.
Note: Knob is enabled by default
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Instead of having global allow_delete move it to
where it belongs in the zrouter data structure.
Additionally show this data in `show zebra`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability for the netconf dplane code to handle
the global NETCONFA_IFINDEX_DEFAULT and NETCONF_IFINDEX_ALL
values. Then store our interested values when we get
them from the kernel as well as being able to display
them to the end operator.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
PBR rules are installed as match, action rules in most dataplanes. This
requires the action to be resolved via a GW. And the GW to be subsequently
resolved to {SMAC, DMAC}.
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Currently specific local neighbors (attached to SVIs) are maintatined
in an EVPN specific database. There is a need to maintain L3 neighbors
for other purposes including MAC resolution for PBR nexthops.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Cleanup compile and fix crash
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
When a nexthop is set RTNH_F_LINKDOWN, start noticing
that this flag is set. Allow FRR to know about this
flag but at this point do not do anything with it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Allow end operator to set how long a nexthop-group is kept around
in the system after it is no-longer being used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Before deleting nexthop groups, that are installed,
from the system, start a timer and hold the nexthop
group for that time.
Suppose you have this scenario
a) create a static route with 1 x ecmp
creates a nhg with 1 x ecmp
b) create a static route with 2 x ecmp
creates a nhg with 2 x ecmp
deletes a's nhg
c) create a static route with 3 x ecmp
creates a nhg with 3 x ecmp
deletes b's nhg
d) create a different route with 1 x ecmp
creates another 1 x ecmp ( since a's ecmp was deleted )
e) create a different route with 2 x ecmp
creates another 2 x ecmp ( since b's ecmp was deleted )
If you don't delete the nhg, start a timer, the nhg's used
in steps a and b can be reused for steps d and e. This reduces
overhead work with zebra <-> kernel interactions and improves
the speed of the system.
So modify the code to note that an installed nexthop group should
be kept around a bit and hopefully reused.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There's a common pattern of "get VRF context for CLI node" here, which
first got a helper macro in zebra that then permeated into pimd.
Unfortunately the pimd copy wasn't quite adjusted correctly and thus
caused two coverity warnings (CID 1517453, CID 1517454).
Fix the PIM one, and clean up by providing a common base macro in
`lib/vty.h`.
Also rename the macros (add `_VRF`) to make more clear what they do.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add command for use to set protodown via frr.conf in
the case our default conflicts with another application
they are using.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add to `show zebra` whether or not RA is compiled into FRR
and whether or not BGP is using RFC 5549 at the moment.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The name 'opaque' is a little general - call the route_entry
struct 're_opaque' to make it more specific.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Update ospfd and ospf6d to send opaque route attributes to
zebra. Those attributes are stored in the RIB and can be viewed
using the "show ip[v6] route" commands (other than that, they are
completely ignored by zebra).
Example:
```
debian# show ip route 192.168.1.0/24
Routing entry for 192.168.1.0/24
Known via "ospf", distance 110, metric 20, best
Last update 01:57:08 ago
* 10.0.1.2, via eth-rt2, weight 1
OSPF path type : External-2
OSPF tag : 0
debian#
debian# show ip route 192.168.1.0/24 json
{
"192.168.1.0\/24":[
{
"prefix":"192.168.1.0\/24",
"prefixLen":24,
"protocol":"ospf",
"vrfId":0,
"vrfName":"default",
"selected":true,
[snip]
"ospfPathType":"External-2",
"ospfTag":"0"
}
]
}
```
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add optional NHG ID output to `show ip route` dumps. We have
this in json output already as nexthopGroupID but nice
to have the option in a normal dump as well. Not including in main
output for now to avoid breaking screen scrapers.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
In some cases, zebra may install a nexthop-group id that is
different from the id of the nhe struct attached to a
route-entry. This happens for a singleton recursive nexthop,
for example, where a route is installed with the resolving
nexthop's id.
The installed value is the most useful value - that corresponds
to information in the kernel on linux/netlink platforms that
support nhgs. Display both values if they differ in ascii
output, and include both values in the json form.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:28 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65003
Communities : first 65001:2 65001:3
Large-Communities: 65001:1:1 65001:1:2 65001:1:3
Selection reason : First path received
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
PIM is going to need to be able to send down the address it is
trying to resolve in the multicast rib. We need a way to signal
this to the end developer. Start the conversion by adding the
ability to have a safi. But only allow SAFI_UNICAST at the moment.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The entirety of the import checking no longer needs to be
in zebra as that no-one is calling it. Remove the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Because vrf backend may be based on namespaces, each vrf can
use in the [16-(2^32-1)] range table identifier for daemons that
request it. Extend the table manager to be hosted by vrf.
That possibility is disabled in the case the vrf backend is vrflite.
In that case, all vrf context use the same table manager instance.
Add a configuration command to be able to configure the wished
range of tables to use. This is a solution that permits to give
chunks to bgp daemon when it works with bgp flowspec entries and
wants to use specific iptables that do not override vrf tables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We should not be using `case default` with an enumerated type
This prevents the developer of new cases from knowing where
they need to fix by just compiling.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Basically, this is handled by JSON-C library. I've compiled with the
latest release of json-c and it works well.
Didn't test with various distribution versions, but this change is kinda
dependend from the json-c lib version the distra has.
Before:
```
"192.168.100.1\/32":[
{
"prefix":"192.168.100.1\/32",
```
After:
```
"192.168.100.1/32":[
{
"prefix":"192.168.100.1/32",
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
With this patch, zclient can intall seg6 rotues when
they set properties "nh_seg6_segs" on struct nexthop
and set ZEBRA_FLAG_SEG6_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
With this patch, zclient can intall seg6local rotues whem
they set properties nh_seg6local_{action,ctx} on struct nexthop
and set ZEBRA_FLAG_SEG6LOCAL_ROUTE on zapi_route's flag.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This includes community and large-community data.
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:23 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65030
Communities : 65001:1 65001:2 65001:3 65001:4 65001:5 65001:6
Large-Communities: 65001:123:1 65001:123:2
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Description:
Added a new show command("show ip zebra route dump") to dump all routes
with detailed information including nexthops,flags, status ..etc.
This helps for dubugging and added to support_bundle_command.conf.
Defined this command as a hidden command.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Add uptime for use with NHEs to keep track of how
long we have had this NHE in our rib without an update.
This is treated exactly the same as the re->uptime for
routes. When we get an update for a route, we reset the
uptime.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a control and api for the use of backup nexthops in
recursive resolution. With 'no', we won't try to use installed
backup nexthops when resolving a recursive route.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
VNI configuration is done without NB layer in default VRF. It leads to
the following problems:
```
vtysh -c "conf" -c "vni 1"
vtysh -c "conf" -c "vrf default" -c "no vni"
```
Second command does nothing, because the NB node is not created by the
first command.
```
vtysh -c "conf" -c "vrf default" -c "vni 1"
vtysh -c "conf" -c "no vni 1"
```
Second command doesn't delete the NB node created by the first command.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We don't need to use the 'force' flag when processing the
resolve-via-default clis for ip and ipv6: we can just do normal
nht processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `show ip nht` and `show ipv6 nht` commands were broken.
This is because recent code commit: 0154d8ce45
assumed that p must not be NULL and this is not the case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a bit of code to allow bgp to send the AS-Path associated with
the route being installed to zebra so it can be displayed and
used as part of the `show ip route A` command in zebra.
eva# show ip route 20.0.0.0/11
Routing entry for 20.0.0.0/11
Known via "bgp", distance 20, metric 0, best
Last update 00:00:00 ago
* 192.168.161.1, via enp39s0, weight 1
AS-Path: 60000 64539 15096 6939 8075
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
