The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Shows known values in the appropriate naming domain when the user hits
<?> or <Tab>. This patch only works in the telnet CLI, the next patch
adds vtysh support.
Included completions:
- interface names
- route-map names
- prefix-list names
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... no need to have struct zlog generally-exposed.
A few files get to include log_int.h because they use zlog/vzlog.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The protocols enum serves no purpose other than adding potential for
bugs and making it complicated to add a new protocol... nuke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BGP Large Communities are a novel way to signal information between
networks. An example of a Large Community is: "2914:65400:38016". Large
BGP Communities are composed of three 4-byte integers, separated by a
colon. This is easy to remember and accommodates advanced routing
policies in relation to 4-Byte ASNs.
This feature was developed by:
Keyur Patel <keyur@arrcus.com> (Arrcus, Inc.),
Job Snijders <job@ntt.net> (NTT Communications),
David Lamparter <equinox@opensourcerouting.org>
and Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Job Snijders <job@ntt.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exists a possibility that when we cleanup
for shutdown that we may attempt to access
them again.
Found via valgrind, stopped showing up in there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When shutting down a daemon that uses an update
timer to handle route map processing, there
exists a race condition where if you change
a route map and then immediately shutdown
quagga before the update timer for the routemap
runs, you will be placed in a infinite loop.
This condition happens because this commit introduces
route map memory free'ing but never tests to see
if the to_be_processed flag has happened or not
before deleting:
commit 289d25016b
Author: Lou Berger <lberger@labn.net>
Date: Wed Apr 10 12:30:04 2013 -0700
bgpd, lib: memory cleanups for valgrind, plus debug changes
Modify route_map_finish to explicitly turn off the to_be_processed
field. As that we know we are going away if route_map_finish is
called.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Some new routemap hash data structures were not being
properly cleaned up. Add the hash_free code in.
This code does not fix the variety of daemons that
don't actually call route_map_finish.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Consolidate the routemap initialization into one
function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Description:
We use valgrind memcheck quite a bit to spot leaks in
our work with bgpd. In order to eliminate false positives,
we added code in the exit path to release the remaining
allocated memory.
Bgpd startup log message now includes pid.
Some little tweaks by Paul Jakma <paul.jakma@hpe.com>:
* bgp_mplsvpn.c: (str2prefix_rd) do the cleanup in common code at the end
and goto it.
[DL: dropped several chunks from original commit which are obsolete by
now on this tree.]
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Prepares the library CLI functions for concurrent config access. Note
the vty->index pointer is still kept functional for the daemons to use.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This places the appropriate calls so library objects can be used with
qobj "pointers", especially in the CLI.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
N.B.: some of these are de-facto ALIAS resurrections
that are necessary due to some parser limitations; these
are marked with ALIAS_FIXME so I can go back and add
capability to the parser to handle these special cases.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
ICC thinks we're storing a pointer and might be losing bits at the top:
error #810: conversion from "void *" to "route_map_event_t={enum
<unnamed>}" may lose significant bits
Build is warning-free on ICC 14.0.3 (for Linux x86_64) with this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Quick create/delete actions on a route-map can result in the same route-map
entity having multiple entries created for it — because BGP hasn't run the
update processing to complete prior delete action. The route-map is present
in both a hash table as well as a linked list and the order in each is
different. This can lead to problems when the BGP route-map update processing
runs and finds the same route-map entity present for deletion multiple times.
For example, while processing instance-2 of rmap-A, the code may end up
freeing the hash bucket corresponding to instance-1 of rmap-A.
The fix works by ensuring the list is ordered the same way as the hash
buckets.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Ticket: CM-10023
Reviewed By: CCR-4747
Testing Done: manual, bgp-smoke
Signed-off-by: Donald Sharp <sharp@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Updates to routemaps and delete of the routemap were not working properly
for VRFs. This was because while routemaps are global, the routemap update
processing timer and the processing were at the per-instance level. This
approach was unable to handle processing for multiple instances as the
routemap has no tracking of which instances are still pending processing.
This lead to the processing happening correctly only for the first instance
- which could be the default instance or some other instance. It could also
result in reference to freed memory for an instance.
The fix done is to make the update/delete processing also global and not per
instance. This means that the route-map delay timer will be global and a global
thread will handle the change (or delete) for all instances instead of spawning
a separate thread for each instance. To support this, a global BGP command
"bgp route-map delay-timer <value>" has been implemented. The existing command
per-instance is not deleted but will update the global timer.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6970, CM-9918
Reviewed By: CCR-4320
Testing Done: Manual, bgpsmoke
Ticket: CM-7566
Reviewed By: Daniel Walton, Donald Sharp
Testing Done: Manual testing - see bug
Since on a route-map deny clause, the route-map will end on match, the on-match next and on-match goto statements are meaningless and confusing. Removed them.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
- use a hash to store the route-maps
- reduce the number of route_map_lookup_by_name() calls in BGP
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7407
——————————————-------------
- etc/init.d/quagga is modified to support creating separate ospf daemon
process for each instance. Each individual instance is monitored by
watchquagga just like any protocol daemons.(requires initd-mi.patch).
- Vtysh is modified to able to connect to multiple daemons of the same
protocol (supported for OSPF only for now).
- ospfd is modified to remember the Instance-ID that its invoked with. For
the entire life of the process it caters to any command request that
matches that instance-ID (unless its a non instance specific command).
Routes/messages to zebra are tagged with instance-ID.
- zebra route/redistribute mechanisms are modified to work with
[protocol type + instance-id]
- bgpd now has ability to have multiple instance specific redistribution
for a protocol (OSPF only supported/tested for now).
- zlog ability to display instance-id besides the protocol/daemon name.
- Changes in other daemons are to because of the needed integration with
some of the modified APIs/routines. (Didn’t prefer replicating too many
separate instance specific APIs.)
- config/show/debug commands are modified to take instance-id argument
as appropriate.
Guidelines to start using multi-instance ospf
---------------------------------------------
The patch is backward compatible, i.e for any previous way of single ospf
deamon(router ospf <cr>) will continue to work as is, including all the
show commands etc.
To enable multiple instances, do the following:
1. service quagga stop
2. Modify /etc/quagga/daemons to add instance-ids of each desired
instance in the following format:
ospfd=“yes"
ospfd_instances="1,2,3"
assuming you want to enable 3 instances with those instance ids.
3. Create corresponding ospfd config files as ospfd-1.conf, ospfd-2.conf
and ospfd-3.conf.
4. service quagga start/restart
5. Verify that the deamons are started as expected. You should see
ospfd started with -n <instance-id> option.
ps –ef | grep quagga
With that /var/run/quagga/ should have ospfd-<instance-id>.pid and
ospfd-<instance-id>/vty to each instance.
6. vtysh to work with instances as you would with any other deamons.
7. Overall most quagga semantics are the same working with the instance
deamon, like it is for any other daemon.
NOTE:
To safeguard against errors leading to too many processes getting invoked,
a hard limit on number of instance-ids is in place, currently its 5.
Allowed instance-id range is <1-65535>
Once daemons are up, show running from vtysh should show the instance-id
of each daemon as 'router ospf <instance-id>’ (without needing explicit
configuration)
Instance-id can not be changed via vtysh, other router ospf configuration
is allowed as before.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
BGP: Reprocess the trigger points when an attached route map changes
Currently, modifications to route maps do not affect already processed
routes; they only affect new route updates. This patch addresses this
limitation.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
