When a daemon wants to know about its routes, make it possible to have
that work for dst-src routes.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The Linux kernel doesn't support dst-src routes with NHGs as nexthop,
for some (rather dubious) caching reasons.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Implement the necessary data structures and code changes to support sending
table-direct routes to protocols running in different VRFs.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Return error if IPv6 address or prefix is passed as an argument
to "show ip route" command.
UT:
r1# show ip route 2::3/128
% Cannot specify IPv6 address/prefix for IPv4 table
r1#
r1# show ip route 2::3
% Cannot specify IPv6 address/prefix for IPv4 table
r1#
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Current -n option is only for zebra and mgmtd. All other daemons receive
the VRF backend configuration from zebra upon connection to it. This
leads to a potential race condition - daemons need to know the backend
before they start reading their config, but they can be not connected to
zebra yet at this point. As the VRF backend cannot change during runtime,
let's introduce a new global -w option for setting netns backend, to
make sure that all daemons know their VRF backend immediately after
start.
The reason for introducing a new option instead of making -n global is
that ospfd already uses -n for another purposes.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
vrf->ns_ctxt is only ever used in zebra, so move its initialization to
zebra's callback. Ideally this pointer shouldn't even be a part of
library's vrf struct, and moved to zebra-specific struct, but this is
the first step.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
The backend type cannot be unknown. It is configured to VRF_LITE by
default in zebra anyway, so just init to VRF_LITE in the lib and remove
the UNKNOWN type.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
Currently FRR when installing a nexthop group, the installation can fail.
The assumption with the code was that the current nexthop group was
not already installed. This leaves a problem state where if the
users of the nexthop group are removed, the nexthop group will be
removed possibly leaving a orphaned nexthop group in the data plane.
FRR on a nexthop group installation does not actually know the status
of the nexthop group in the kernel. It's possible that a earlier
version of the nexthop group is left in play. It's possible that
there is no nexthop group in the kernel at all. Leaving the
Installed flag alone allows upon Zebra removing the nexthop
group when it is removed from zebra.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently if you have an interface down event, Zebra
sets the nexthop(s) as !ACTIVE that use it. On
interface up events the singleton nexthops are not being
set as ACTIVE. Due to timing events it is sometimes
possible to end up with a route that is using a singleton
Change singleton nexthops to set the nexthop to ACTIVE.
This will allow the nexthop to be reinstalled appropriately
as well.
I was able to easily reproduce this using sharpd since
it does not attempt to reinstall the routes when a interface
goes up/down.
Before:
D>* 10.0.0.0/32 [150/0] via 192.168.102.34, dummy2, weight 1, 00:00:01
sharpd@eva ~/frr5 (master)> sudo ip link set dummy2 down ; sudo ip link set dummy2 up
D> 10.0.0.0/32 [150/0] (350) via 192.168.102.34, dummy2 inactive, weight 1, 00:00:10
After code change:
D>* 10.0.0.0/32 [150/0] (73) via 192.168.102.34, dummy2, weight 1, 00:00:14
sharpd@eva ~/frr5 (master)> sudo ip link set dummy2 down ; sudo ip link set dummy2 up
D>* 10.0.0.0/32 [150/0] (73) via 192.168.102.34, dummy2, weight 1, 00:00:21
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In some cases, the old_re nhe and the newnhe is same and there is no
point in comparing them both since they are the same. Skip comparing in
such cases.
Ex:
2025/01/09 23:49:27.489020 ZEBRA: [W4Z4R-NTSMD] zebra_nhg_rib_find_nhe: => nhe 0x555f611d30c0 (44[38/39/45])
2025/01/09 23:49:27.489021 ZEBRA: [ZH3FQ-TE9NV] zebra_nhg_rib_compare_old_nhe: 0.0.0.0/0 new id: 44 old id: 44
2025/01/09 23:49:27.489021 ZEBRA: [YB8HE-Z86GN] zebra_nhg_rib_compare_old_nhe: 0.0.0.0/0 NEW 0x555f611d30c0 (44[38/39/45])
2025/01/09 23:49:27.489023 ZEBRA: [ZSB1Z-XM2V3] 0.0.0.0/0: NH 20.1.1.9[0] vrf default(0) wgt 1, with flags
2025/01/09 23:49:27.489024 ZEBRA: [ZSB1Z-XM2V3] 0.0.0.0/0: NH 30.1.2.9[0] vrf default(0) wgt 1, with flags
2025/01/09 23:49:27.489025 ZEBRA: [ZSB1Z-XM2V3] 0.0.0.0/0: NH 20.1.1.2[4] vrf default(0) wgt 1, with flags ACTIVE
2025/01/09 23:49:27.489026 ZEBRA: [ZM3BX-HPETZ] zebra_nhg_rib_compare_old_nhe: 0.0.0.0/0 OLD 0x555f611d30c0 (44[38/39/45])
2025/01/09 23:49:27.489027 ZEBRA: [ZSB1Z-XM2V3] 0.0.0.0/0: NH 20.1.1.9[0] vrf default(0) wgt 1, with flags
2025/01/09 23:49:27.489028 ZEBRA: [ZSB1Z-XM2V3] 0.0.0.0/0: NH 30.1.2.9[0] vrf default(0) wgt 1, with flags
2025/01/09 23:49:27.489028 ZEBRA: [ZSB1Z-XM2V3] 0.0.0.0/0: NH 20.1.1.2[4] vrf default(0) wgt 1, with flags ACTIVE
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
If you have this series of events:
a) Decision to install a NHG is made in zebra, enqueue to DPLANE
b) Changes to NHG are made and we remove it in the master pthread
Since this NHG is not marked as installed it is not removed
but the NHG data structure is deleted
c) DPLANE installs the NHG
In the end the NHG stays installed but ZEBRA has lost track of it.
Modify the removal code to check to see if the NHG is queued.
There are 2 cases:
a) NHG is kept around for a bit before being deleted. In this case
just see that the NHG is Queued and keep it around too.
b) NHG is not kept around and we are just removing it. In this case
check to see if it is queued and send another deletion event.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
During route processing in zebra, Zebra will create a nexthop
group that matches the nexthops passed down from the routing
protocol. Then Zebra will look to see if it can re-use a
nhe from a previous version of the route entry( say a interface
goes down ). If Zebra decides to re-use an nhe it was just dropping
the route entry created. Which led to nexthop group's that had
a refcount of 0 and in some cases these nexthop groups were installed
into the kernel.
Add a bit of code to see if the returned entry is not being used
and it has no reference count and if so, properly dispose of it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
"ip/ipv6 protocol any route-map <route map>" cli is setting
wrong route type ( ZEBRA_ROUTE_MAX ), It should set route type
ZEBRA_ROUTE_ALL.
Ticket: #4101560
Signed-off-by: Sougata Barik <sougatab@nvidia.com>
Fixing compilation error in a switch statement case
Fixes :aa4786642c9a65c282d0fd5247a35b0f14fa1c3c
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
If Duplicate Address Detection action is freeze
(permanent or definite time means not warn only mode)
then locally duplicate detected MAC delete notification
is not require to inform,
instead ask BGP to sync previous remote MAC entry.
In freeze case local MAC event is not known to BGP,
instead BGP is pointing to remote VTEP for the MAC.
Ticket: #3652383
Issue: 3652383
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Upon if_down, we don't reset the valid flag for dependents
and unset the INSTALLED flag.
So when its time for the NHG to be deleted (routes dereferenced),
zebra deletes it since refcnt goes to 0, but stale NHG remains in kernel.
Ticket :#4200788
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Just like `link down`, check all kernel routes when interface become up.
And, they maybe will be selected as the best one by zebra.
Signed-off-by: anlan_cs <anlan_cs@126.com>
After the nexthop check is fixed, zebra will wrongly uninstall the kernel routes
with inactive nexthop.
This commit would skip the uninstallation for kernel routes.
Signed-off-by: anlan_cs <anlan_cs@126.com>
The kernel routes are wrongly selected even the nexthop interface is linkdown.
Use `ip link set dev <interface> down` on the other box to set the box's
nexthop interface linkdown. The kernel routes will be kept as `linkdown`,
but are still with active nexthop in `zebra`.
Add three changes/commits for kernel routes in this PR:
1) The active nexthop should be the operative interface.
2) Don't uninstall the kernel routes from `zebra` even no active nexthops.
(It doesn't affect the kernel routes' deletion from kernel netlink messages.)
3) Update the kernel routes when the nexthop interface becomes up.
Before: (during nexthop interface is linkdown)
```
K>* 3.3.3.3/32 [0/0] via 88.88.88.1, enp2s0, weight 1, 00:00:14
```
After: (during nexthop interface is linkdown, with all three changes)
```
K 3.3.3.3/32 [0/0] via 88.88.88.1, enp2s0 inactive, weight 1, 00:00:07
```
This commit is 1st change:
Improve the judgment for "active" nexthop to be more accurate, the active
nexthop should be the operative interface.
Signed-off-by: anlan_cs <anlan_cs@126.com>
When debugging a crash I noticed that sometimes we talked about
a zclient connection in relation to the fd associated with it
and sometimes we did not. Let's just always give the data
associated with the fd. It will make it a bit easier for me
to follow the transitions.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add `mrib` flag to existing "show ip route" commands which then use
the multicast safi rather than the unicast safi. Updated the vty output
to include the AFI and SAFI string when printing the table.
Deprecate `show ip rpf` command, aliased to `show ip route mrib`.
Removed `show ip rpf A.B.C.D`.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Multicast mode belongs in PIM, so removing it completely from zebra.
Modified `show (ip|ipv6) rpf ADDRESS` to always lookup from SAFI_MULTICAST.
This means this command is now specific to the multicast table and does
not necessarily reflect the PIM RPF lookup, but that should be implemented
in PIM instead.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Modified ZEBRA_NEXTHOP_LOOKUP_MRIB to include the SAFI from which to do the lookup.
This generalizes the API away from MRIB specifically and allows the user to decide how it should do lookups.
Rename ZEBRA_NEXTHOP_LOOKUP_MRIB to ZEBRA_NEXTHOP_LOOKUP now that it is more generalized.
This change is in preperation to remove multicast lookup mode completely from zebra.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Effectively When bgp would send a route update down
to zebra and immediately after that a asic update
from the kernel was read. Zebra would choose the
asic update and drop the bgp update leaving us in
a state where bgp was not used as the true source.
Modify the code so that in rib_multipath_nhe
we notice that we have an unprocessed route update
from bgp. And if so just drop this kernel update
about an older version of the route since it is
no longer needed.
Ticket: 2722533
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For those packets that we are not sending 16k of data, but something
far less than 256 bytes. Reduce those stream sizes we allocate
to something much more reasonable.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a MAC gets deleted but associated neighbors remain, the MAC is
kept in the zebra MAC database as an internal ("auto") entry. When
this happens, reset the MAC's remote sequence number. This ensures that
when the host with the MAC later comes up behind a remote VTEP, the
local switch accepts the MAC and installs it into the bridge FDB and
we don't end up in a situation where remote MACs are not installed
into the bridge FDB.
This fix is a corollary of CM-22753 and is this time done for local
MACs upon delete.
Note: Commit is marked Cumulus-only because I need to evalute more
comprehensive changes before upstreaming it.
Ticket: CM-29581
Reviewed By: As above
Testing Done:
1. Multiple rounds of manual testing
2. Two rounds of evpn-smoke, 1 round of precommit
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Acked-by: Chirag Shah <chirag@cumulusnetworks.com>
Acked-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The netlink route message encode function accessed and used
zebra vrfs to produce debug output. That's not thread-safe, and
that encode code needs to run in (at least) the dplane pthread
and the FPM plugin pthread.
Signed-off-by: Mark Stapp <mjs@cisco.com>
