For show ip pim interface traffic cli, doing the below changes
1. Changing DEFUN to DEFPY
2. Move the whole code to a common api and modify it so that can
be reused for pimv6.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving pim_show_interface_traffic and pim_show_interface_traffic_single
to pim_cmd_common.c from pim_cmd.c to make it common to
pimd and pim6d.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Moving the common lines of pim_show_join_vrf and pim_show_join_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
the `show ip pim interface [x] traffic` command was deciding
to skip display of interfaces if they happened to be down at
that moment. This of course does not make a bunch of sense
to limit the output for a interface that may have sent data
in the past.
This fixes this test crash:
rnode = <lib.topogen.TopoRouter object at 0x7fc755be3880>, dut = 'c1', input_dict = {'c1': {'c1-l1-eth2': ['helloTx', 'helloRx']}}, output_dict = {'c1': {}}
def show_pim_intf_traffic(rnode, dut, input_dict, output_dict):
show_pim_intf_traffic_json = run_frr_cmd(
rnode, "show ip pim interface traffic json", isjson=True
)
output_dict[dut] = {}
for intf, data in input_dict[dut].items():
> interface_json = show_pim_intf_traffic_json[intf]
E KeyError: 'c1-l1-eth2'
/home/sharpd/frr8/tests/topotests/lib/pim.py:1496: KeyError
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The pim_channel_oil_empty() function was setting
the pimreg if it ever existed for NULL comparison
but of course the pimreg device is never pulled back
out again when it was needed to be when the pimreg
is not present.
Commit: a5fa982256
broke this.
Fixes: #11368
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Moving the common lines of pim_show_nexthop_lookup cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_nexthop cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_neighbors_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_neighbors cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_local_membership cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_jp_agg cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface_vrf_all cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_interface cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Moving the common lines of pim_show_channel cli
in pim_cmd.c and pim6_cmd.c to pim_cmd_common.c file
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
The test for setting pimDesignatedRouterLocal was comparing
the result of pim_addr_cmp to non zero to say that the
pim_dr_addr and primary_address are the same. This is
not correct in that pim_addr_cmp returns 0 for being the
same, so the correct test is !pim_addr_cmp
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
PIM conformance test case 11.12 sends a register stop msg with
source address as 0. This should trigger a register stop for
all the upstreams. It is not happening as such because we are not
considering 0.0.0.0 source address for starg_handling.
Fixed it.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
All rp_info's are being saved in the pim->rp_list and the non prefix-list
rp's are supposed to be saved in table pim->rp_table. What was happening,
though, is that all the plists were being stored at the 224.0.0.0/4 node
of the tree(irrelevant to the fact that we should not be looking up the
non-prefix list rp's in the table) and since we can have multiple prefix lists
and only one rp_info stored at the 224.0.0.0/4 node of the tree, there can be situations
where the 224.0.0.0/4 node can be overwritten due to the order entered.
As such there exists situations where command enter ordering will cause
what we match to, change in pim_rp_find_match_group.
Fixes:
a) Do not store prefix list based rp_info's in the pim->rp_table
b) In pim_rp_find_match_group, ensure that the node lookup does
not correspond to a prefix list based node.
c) When in the situation there are both:
ip pim rp 4.5.6.7 224.0.0.0/16
ip pim rp 5.6.67.8 prefix-list FOO
ip prefix-list FOO permit 224.0.1.0/24
and we receive a group for 224.0.1.5, we were comparing the
224.0.0.0/16 to the 224.0.0.0/4 of the 5.6.67.8 group, when
FRR should have been comparing to entry that matched in the prefix-list
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
pimd is receiving v3 igmp packets on an interface that is setup as v2 and
causing the igmp group as configured on that interface to get a bit
wonky.
Add a check to receiving v3 packets and to drop the packet if the
igmp version configed on the interface is 2.
Fixes: #11105
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implementing debug pimv6 zebra command for debugging about
the events from zebra that come up through the ZAPI.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing debug pimv6 packetdump send and recv coomands for debugging
of pimv6 packet sent and received which are dumped.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing pimv6 packets debug to information about packet generation for sending
and about packet handling from a received packet.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Implementing debug pimv6 nht command for PIMv6 nexthop tracking.
It will display information about RPF lookups and information about when a nexthop changes.
debug pimv6 nht detial for for PIMv6 nexthop in detail.This is not enabled by default.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
