Once NSSA is unconfigured on an area, all self-originated Type-7
LSAs need to be flushed. The existing code was iterating over the
LSDB in the wrong way, causing ospf6_nssa_flush_area() to flush
LSAs of all types. Use the ALL_LSDB_TYPED_ADVRTR macro to perform
the intended iteration correctly.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once NSSA is unconfigured, the OSPF area should still be operational
as a normal area instead of being deleted.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 3101 - Section 2.1 says:
"(..) Interfaces associated with an NSSA will not send or receive
Type-5 LSAs on that interface but may send and receive Type-7 LSAs.
Therefore, if the N-bit is set in the options field, the E-bit must
be clear."
If the E-bit isn't cleared on an NSSA ABR, that will cause hello
packets to be dropped (due to parameters mismatch), which will
prevent the ABR from forming adjacencies with others routers in
the NSSA area.
This problem didn't affect the existing NSSA topotest by chance
of luck. In that topotest, in the NSSA ABR, the NSSA area is
configured before any interface is associated to it. That caused
ospf6_check_and_set_router_abr() to return false, leading to
the unsetting of the E-bit. With this fix, the order in which
areas/interfaces are configured shouldn't matter because the E-bit
will always be unset on NSSA areas.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RCA: When Type-7 LSA is updated, the LSDB is searched, if the
LSA is present in the LSDB then the LSA is updated with next
sequence number and if not then it is originated with the
INITIAL sequence number.
Here while originating Type-7 LSA Process Level LSDB is searched
for instead of area level LSDB.
Fix: Search in the area level LSDB and not in the process level.
Fixes#9099
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
This is a requirement for avoiding sending traffic somewhere it was not
supposed to go: install summary route to local RIB to send traffic to
Null0.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Prefix options are per-prefix, not per-path. As evident by the fact
that the field is never used on ECMP paths. Move it where it belongs.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The ospf6_is_router_abr is checking to see if ospfv3 is an abr router
and also setting values. Let's rename it too `ospf6_check_and_set_router_abr`
to more accurately reflect what it is doing.
Additionally fix coverity #1505176 where we were not checking the return
value of ospf6_is_router_abr like we did every other time. In this
case we don't care about the return value so indicate that we do not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The following is implemented.
1. Configuring area as NSSA.
2. Generating Type 7 LSA.
3. Conversion of Type 7 to Type 5 ( Default Behavior).
4. NSSA ABR selection.
Reviewed-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Co-authored-by: Kaushik <kaushiknath.null@gmail.com>
Co-authored-by: Soman K.S <somanks@gmail.com>
Signed-off-by: Kaushik <kaushiknath.null@gmail.com>
