Ensure the list of daemons to start is either the one specified
by a caller or the default one from the router configuration.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Topotest for isis-vrf is added for ipv4 and ipv6.
2. Test case for checking isis topology.
3. Test case for checking zebra isis routes.
4. Test case for checking linux vrf routes.
5. 2 new API's written in topotest/lib for checking vrf routes.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Avoid unnecessary use of StringIO in one place, use version-
dependent method in another. Remove a couple of other py2->py3
problems.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
add thread info, use "bt full" to get variables and add a bit of
disassembly for good measure.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. It will generate support bundle/sump data on test failures
2. It used /usr/lib/frr/generate_support_bundle.py utility to dump the data
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Use the right list of daemons to avoid trying to start zebra twice.
Change a zebra log message to INFO level to avoid stderr check
failure.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a few retries during router shutdown before killing a daemon. Also
work harder to start only a single instance of daemons, esp. zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Instead of waiting for daemons start with `sleep`, start them with the
`-d` parameter so they can release the terminal themselves when ready.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Start logging early everything (including debug) to
`/tmp/topotest/<test>/<node>/<daemon>.{out,err}`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Handle the duplicated code with a simple conditional: if called from
specialized API use provided daemons configuration, otherwise fallback
to old `Router` own daemon settings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Just a simple setup for pbr to prove it starts. Once the json
code for pbr gets in we can add more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The involved piece of code is supposed to find a 'closest' match for two
JSON structures using another JSON diff. However, it can happen that
during that new diff the JSON structures are altered (elements from a
list are deleted when 'found'). This is in general ok when the deleted
element is part of the JSON structure which 'matches', but when it later
turns out that some other element of the structure doesn't fit, then the
whole structure should be recovered. This is now realized by using a
deepcopy for the besaid new JSON diff such that the original is only
altered (e.g. deleted) when the diff is clean.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
1. Adding APIs to common_config.py to support BGP-Graceful-Restart automation
2. Adding APIs to create BGP-GR config to bgp.py
3. Adding verification API for BGP-GR functionality
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Diff'ing JSON objects is a crucial operation in the topotests for
comparing e.g. vtysh output (formatted as JSON) with a file which
covers the expectation of the tests. The current diff functionality
is 'self-written' and intended to test a JSON object d2 on being a
subset of another JSON object d1. For mismatches a diff is generated
based on a normalized textual representation of the JSON objects.
This approach has several disadvantages:
* the human provided JSON text might not be normalized, hence
a diff with line numbers might be worthless since it provides
close to zero orientation what the problem is
* the diff contains changes like commatas which are meaningless
* the diff might contain a lot of changes about meaningless
content which is present in d1 but not in d2
* there is no proper functionality to test for 'equality' of
d1 and d2
* it is not possible to test for order, e.g. JSON arrays are
just tested with respect to being a subset of another array
* it is not possible to check if a key exists without also
checking the value of that particular key
This commit attempts to solve these issues. An error report is
generated which includes the "JSON Path" to the problematic JSON
elements and also hints on what the actual problem is (e.g. missing
key, mismatch in dict values etc.).
A special parameter 'exact' was introduced such that equality can be
tested. Also there was a convention that absence of keys can be
tested using the key in question with value 'None'. This convention
is still honored such that full backwards compatiiblity is in
place.
Further order can be tested using the new tag '__ordered__' in
lists (as first element). Example:
d1 = [1, 2, 3]
d2 = ['__ordered__', 1, 3, 2]
Tesing d1 and d2 this way will now result in an error.
Key existence can now be tested using an asterisk '*'. Example:
d1 = [1, 2, 3]
d2 = [1, '*', 3]
d1 = {'a': 1, 'b': 2}
d2 = {'a': '*'}
Both cases will result now in a clean diff for d1 and d2.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
The new `run_and_expect` variant - called `run_and_expect_type` - tests
the return value type of the test function and optionally the return
value.
Now we can implement tests from test functions that return different
return types.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Adding in the command `show log-filter` made `show log`
ambiguous. Change the checkRouterRunning() test to do
full `show logging` so it works again.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a common function to retrieve and canonicalize
'show ipv6 route' output for use in topotests. Use that in
the test_ospf6_topo1 test; update the corresponding 'expected'
results files to match the lib function.
Replace some 'print' with 'logger' statements in that test also.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
`param.get` always evaluates the second argument and it was causing
two log directories being created for topologies using Topogen.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Start the addition of FreeBSDRouter class that inherits from
class Router. At this point we do not do a whole lot. We
just come up on FreeBSD, lots of stuff that still needs to
be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of the class rework, move the linux specific config
into the LinuxRouter.config section instead of being in the
Router class.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the LinuxRouter code such that it inherits from the
Router class. This is setup work for (a) pulling out linux
specific config from class Router and (b) creating a FreebsdRouter
that inherits from class 'Router'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The sharp daemon did not have any ability to be used in
topotests. Add some code to allow this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start abstraction of the module_present into module_present_linux and freebsd
To allow for multiple platforms that the topotests can be run on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Before this update, json_cmp_results which were formatted as strings
would not show the error mesage but just an object reference.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a breadcrumb for people testing to hopefully allow
them to figure out what is going wrong when they
are testing different versions of FRR using
topotests and staticd is not running because
this version of staticd needs to be cleaned up
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Label proxy manager test covering both LDP and BGP label requests.
lib/topotest.py:restartRouter() function has been fixed in order to
allow propagating options to deamons other than zebra.
Signed-off-by: F. Aragon <paco@voltanet.io>
The code was not attempting to set the max platform_labels
on a per router basis, leaving us w/ situations where
mpls install would fail because platform_labels was 0.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
