These commands were ported forward from these
commits:
f9b6c39 bgpd: Add back old forms of 'show <afi> <safi>' for compatibility
bf1ae6c bgpd: drop machineparse / random "show" improvements
651b402 bgpd: encap show commands
35c3686 bgpd: VPNv6 show commands
135ca15 bgpd: cleanup vty bgp_node_afi/safi utils
This is the first drop of those commits. The files have
changed too much and the diffs to extensive to try to do it
in one piece. Break it up into smaller code chunks.
Original Code:
Signed-off-by: Lou Berger <lberger@labn.net>
Forward Port:
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In multipath selection, there can be a scenario where the set of route
entries selected as multipath can be the same (i.e., from the same peers)
but one or more of these may have a change to the BGP next hop. In this
case, the route needs to be installed again in zebra even if the best
route entry selected has not changed, otherwise the zebra RIB may have
a different set of next hops (and first hops) than what the routing
protocol selected.
This patch handles this scenario by re-installing the route if any BGP
attribute has changed for any of the multipaths. Not all BGP attributes
are of relevance to the zebra RIB, but this approach follows existing
logic used in the code (e.g., when BGP attributes for the best route
entry has changed).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Sid Khot <sidkhot@cumulusnetworks.com>
Ticket: CM-12390
Reviewed By: CCR-5135
Testing Done: Manual, bgp-smoke
After BGP path selection, even if the best route entry selected has not
changed, ensure that the route is installed again in zebra if any non-best
but multipath route entry has a nexthop resolution change.
In the absence of this fix, if a non-best multipath route entry had a
nexthop resolution change (such as being resolved over two first hops instead
of one), the route would get reinstalled into zebra only in some situations
(i.e., when the best route entry had its IGP change flag set). If the route
does not get reinstalled by BGP, the corresponding route in the zebra RIB
would not have all the first hops.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Sid Khot <sidkhot@cumulusnetworks.com>
Ticket: CM-12390
Reviewed By: CCR-5134
Testing Done: Manual, bgp-smoke
There are cases where customers desire the ability to override the
default behavior of installing ipv6 prefixes with a link-local next-hop
if both a link-local and global ipv6 next-op is present in the bgp table.
This fix provides this ability and will allow the global to be used as the
next-hop. This also retains the ability to manually set the ipv6 next-hop
global value as before, and if so, this manual entry will be used for the
next-hop.
Ticket: CM-11480
Signed-off-by: Don Slice
Reviewed By: CCR-4983
Testing Done: Manual testing results attached to the ticket. bgp-min and
bgp-smoke will be completed before committing.
Prior to this change, bgp always identified the routing table used as
the default in the output of "show ip bgp x.x.x.x". This fix changes
the behavior to use the correct table name.
Ticket: CM-10239
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
This reverts commit ff75b6c05b.
lib/table.c's route_common() can create a rn for a prefix that BGP has
never RXed. For example here we RX 10.1.8.0/24 from neighbor 10.0.0.2,
notice how the 10.1.0.0/20 entry is created. We would later assert on
this prefix because its info was NULL.
2016/06/16 23:37:21.418426 BGP: 10.0.0.2 rcvd UPDATE w/ attr: nexthop 10.0.0.2, origin i, localpref 100, metric 0, community 99:7, path
2016/06/16 23:37:21.418442 BGP: 10.0.0.2 rcvd UPDATE wlen 0 wpfx 0 attrlen 36 alen 4 apfx 1
2016/06/16 23:37:21.418458 BGP: bgp_node_create called
2016/06/16 23:37:21.418475 BGP: route_node_get called for 10.1.8.0/24, route_node_new 10.1.0.0/20, match (nil)
2016/06/16 23:37:21.418519 BGP: bgp_node_create called
2016/06/16 23:37:21.418536 BGP: route_node_get called for 10.1.8.0/24, route_node_new(2) 10.1.8.0/24, match 0x2013cd0
2016/06/16 23:37:21.418554 BGP: 10.0.0.2 rcvd 10.1.8.0/24
If rn->info is NULL then avoiding the group_announce_route() call in
bgp_proces_main() also feels risky as this code path generates WITHDRAWs
for prefixes that no longer have a bestpath which would be the case if
there are no paths.
Ticket: CM-11344
Reviewed By: dwalton, dsharp
Testing Done: built and tested amd64 debs
This patch adds the peerID JSON attribute for routes for show ip bgp json.
It also corrects the bgpTimerLastWrite in show ip bgp neigh json as well
as adds bgpInUpdateElapsedTimeMsecs, lastErrorCodeSubcode, and connectRetryTimer.
These are needed for the bgp4 mib implementation (rfc 4273) from the json
output of vtysh commands.
VPNv6 changes picked from upstream needed fixes and updates due to some
fundamental changes implemented by Cumulus (BGP update-groups, RFC 5549
and nexthop setting etc.) which aren't present upstream.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Updates: 945c8fe, 8ecd326, bb86c60, 93b73df, f4c8985
This accelerates handling of incoming Withdraw messages for routes that
don't exist in the table to begin with. Cisco IOS 12.4(24)T4 has a bug
in this regard - it sends withdraws instead of doing nothing for
prefixes that are filtered.
Pulling up the adj_in removal in Quagga should have no ill effect, but
we can avoid the costly iteration over all rsclients if there was no
adj_in entry.
Performance impact of this change on routeserver with 3 buggy peers,
startup/sync time:
before patch: 143.12 seconds (user cpu)
after patch: 7.01 seconds (user cpu)
Many thanks to Nick Hilliard & INEX for providing real-world test data!
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Paul Jakma <paul@jakma.org>
This changes the existing _vpnv4 functions for MPLS-VPN into
SAFI-agnostic functions, renaming them from *_vpnv4 to *_safi.
Also adds route-map support while at it.
Signed-off-by: Lou Berger <lberger@labn.net>
Reviewed-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit a76d9ca3584c1751a592457c167c1e146648ceb6)
Conflicts:
bgpd/bgp_route.c
* bgp_nexthop.c: (bgp_scan) There is little point queueing an rn with no routing
information for processing.
* bgp_route.c: (bgp_process) Do nothing on rn's with no routes. Add an assert
for now, to try catch any other cases, but prob should be removed.
(bgp_best_selection) rn with no routes == finish early.
(cherry picked from commit 91b9e8547a7c5697d5d7481f9476778077024019)
Conflicts:
bgpd/bgp_nexthop.c
bgpd/bgp_route.c
My original su_remote == NULL check is not correct. It seems that
* bgp_route.c: (bgp_info_cmp) Some bgp_info is compared with su_remote=NULL
and it's supposed to be perfectly legal. E.g. configured subnet announces
("network a.b.c.d/n"). Ensure bgp_info_cmp is robust if such a path gets
as far as the neighbour address comparison step.
(cherry picked from commit 2820a01eed1c616d490ddbfd17793c19597459d1)
Conflicts:
bgpd/bgp_route.c
Using #ifdef inside preprocessor macro argument lists is not guaranteed
to work. In reality it mostly does, but we don't need these ifdefs for
HAVE_IPV6 anymore, so let's get rid of the warning nonetheless.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 94bad67cd8fe7ad023a40547a1153a414d70fa0a)
Conflicts:
bgpd/bgp_route.c
Fix lots of warnings. Some const and type-pun breaks strict-aliasing
warnings left but much reduced.
* bgp_advertise.h: (struct bgp_advertise_fifo) is functionally identical to
(struct fifo), so just use that. Makes it clearer the beginning of
(struct bgp_advertise) is compatible with with (struct fifo), which seems
to be enough for gcc.
Add a BGP_ADV_FIFO_HEAD macro to contain the right cast to try shut up
type-punning breaks strict aliasing warnings.
* bgp_packet.c: Use BGP_ADV_FIFO_HEAD.
(bgp_route_refresh_receive) fix an interesting logic error in
(!ok || (ret != BLAH)) where ret is only well-defined if ok.
* bgp_vty.c: Peer commands should use bgp_vty_return to set their return.
* jhash.{c,h}: Can take const on * args without adding issues & fix warnings.
* libospf.h: LSA sequence numbers use the unsigned range of values, and
constants need to be set to unsigned, or it causes warnings in ospf6d.
* md5.h: signedness of caddr_t is implementation specific, change to an
explicit (uint_8 *), fix sign/unsigned comparison warnings.
* vty.c: (vty_log_fixed) const on level is well-intentioned, but not going
to fly given iov_base.
* workqueue.c: ALL_LIST_ELEMENTS_RO tests for null pointer, which is always
true for address of static variable. Correct but pointless warning in
this case, but use a 2nd pointer to shut it up.
* ospf6_route.h: Add a comment about the use of (struct prefix) to stuff 2
different 32 bit IDs into in (struct ospf6_route), and the resulting
type-pun strict-alias breakage warnings this causes. Need to use 2
different fields to fix that warning?
general:
* remove unused variables, other than a few cases where they serve a
sufficiently useful documentary purpose (e.g. for code that needs
fixing), or they're required dummies. In those cases, try mark them as
unused.
* Remove dead code that can't be reached.
* Quite a few 'no ...' forms of vty commands take arguments, but do not
check the argument matches the command being negated. E.g., should
'distance X <prefix>' succeed if previously 'distance Y <prefix>' was set?
Or should it be required that the distance match the previously configured
distance for the prefix?
Ultimately, probably better to be strict about this. However, changing
from slack to strict might expose problems in command aliases and tools.
* Fix uninitialised use of variables.
* Fix sign/unsigned comparison warnings by making signedness of types consistent.
* Mark functions as static where their use is restricted to the same compilation
unit.
* Add required headers
* Move constants defined in headers into code.
* remove dead, unused functions that have no debug purpose.
(cherry picked from commit 7aa9dcef80b2ce50ecaa77653d87c8b84e009c49)
Conflicts:
bgpd/bgp_advertise.h
bgpd/bgp_mplsvpn.c
bgpd/bgp_nexthop.c
bgpd/bgp_packet.c
bgpd/bgp_route.c
bgpd/bgp_routemap.c
bgpd/bgp_vty.c
lib/command.c
lib/if.c
lib/jhash.c
lib/workqueue.c
ospf6d/ospf6_lsa.c
ospf6d/ospf6_neighbor.h
ospf6d/ospf6_spf.c
ospf6d/ospf6_top.c
ospfd/ospf_api.c
zebra/router-id.c
zebra/rt_netlink.c
zebra/rt_netlink.h
This patch addresses David's comments and contains:
1.Addition of show ip bgp dampening command tree
2.Addition of show ip bgp dampening parameters to display BGP dampening
parameters.
Signed-off-by: Balaji.G <balajig81@gmail.com>
(cherry picked from commit 3921cc54445417aa1ca22668063701a626e93098)
RFC 2439, Section 4.2; the values pair up for hysteresis.
Signed-off-by: Balaji.G <balajig81@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit aa7dbb1067b7d02e1354fe1e5664ccb7d259d649)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-10644
Reviewed By:
Testing Done:
The JSON outputs of a bunch of BGP commands were broken due to the
addition of VRF support. This fixes them all. Also replaces the use
of "-" in some of the JSON variable names with camel case names.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-10002
superm-redxp-05# conf t
superm-redxp-05(config)# route-map FOO permit 10
superm-redxp-05(config-route-map)# set community ?
AA:NN Community number in AA:NN format (where AA and NN are <0-65535>) or local-AS|no-advertise|no-export|internet or additive
none No community attribute
superm-redxp-05(config-route-map)# set community 2:2
superm-redxp-05(config-route-map)# set community 2:70000
% Malformed communities attribute
superm-redxp-05(config-route-map)# set community 70000:2
% Malformed communities attribute
superm-redxp-05(config-route-map)#
Key BGP 'show' commands have been expanded to support 'vrf all':
show ip bgp vrf all summary
show ip bgp vrf all neighbors
show ip bgp vrf all nexthop
show ip bgp vrf all update-group
show ip bgp vrf all
show bgp vrf all summary
show bgp vrf all update-group
show bgp vrf all
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-10402
Reviewed By: CCR-4466
Testing Done: Manual
Ensure commands dealing with update-groups and peer-groups support VRFs.
Also implement a new command "show bgp vrfs" to show summary information of
all configured VRFs. Some additional code cleanup in this area.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-9247
Reviewed By: CCR-4267
Testing Done: Manual
bgp_update_main was only called by bgp_update.
bgp_update only called bgp_update_main.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reivewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Various changes and fixes related to VRF registration, deletion,
BGP exit etc.
- Define instance type
- Ensure proper handling upon instance create, delete and
VRF add/delete from zebra
- Cleanup upon bgp_exit()
- Ensure messages are not sent to zebra for unknown VRFs
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-9128, CM-7203
Reviewed By: CCR-4098
Testing Done: Manual
When attempting to use the 'show bgp ipv4 vpnv4 statistics' cli, the safi
choosen is BGP_MPLS_LABELED_VPN which is #defined to 128. The afi/safi
combination is fed to bgp->rib, which limits the size of the safi to BGP_SAFI_MAX
which is #defined to 5. The correct value to use is BGP_MPLS_VPN
The bgp code differentiates between the actual safi value for BGP_MPLS_LABELED_VPN
used defined by RFC 4364, to a internal SAFI value used to limit array size.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During CR for nexthop upstream it was noticed that usage
of prefix2str was not consistent. This fixes this problem
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The json keyword was being read incorrectly.
Basically some commands read a variable # of arguments
and in ospf the command values were being placed into
argc and argv. With a variable # of arguments their
existed a possibility that less arguments would be read
from the cli than were being tested for in the command function
handler. This caused core dumps in some situations.
All code to read to decide to use the json keyword has
been centralized through a function and all code
converted to use it, irrelevant if it exhibited the bug
Ticket: CM-8278
Reviewed by: CCR-3830
Testing: OSPF no longer crashes and all other test suites still run
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch addresses three main issues:
a. Passing along the global IPv6 nexthop received from the EBGP peer to
IBGP peers but setting the link-local IPv6 nexthop to ourselves when
advertising EBGP-learnt routes to IBGP peers (in the absence of outbound
route-map or other overrides). The fix is to not send a link-local IPv6
nexthop in this case.
b. Passing along the link-local IPv6 nexthop received from one peer to
another peer which is (or may be) on a different subnet. This violates the
semantics of link-local IPv6 address. The fix is to set the nexthop to
ourselves in the situation where the nexthop normally has to be passed
but is a link-local IPv6 address.
c. Different behavior wrt nexthop advertisement for BGP unnumbered peering
if it is setup using link-local IPv6 address versus IPv4 /30 or /31. The
fix is to make the behavior consistent as long as the interface config is
the same in both cases.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-7846, CM-8043
Reviewed By: CCR-3749
Testing Done: Manual testing, bgpsmoke (on 2.5-br)
Note: Imported from 2.5-br patch bgpd-fix-link-local-nexthop-setting.patch
will be deprecated in the future
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-8144
