Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
When show ip ospf border-routers json (without vrf)
specificed, it leads to crash if there no border-routers
information.
Fix:
Do not free json object if use_vrf flag (means vrf option
is not passed) is not set.
Ticket:#3229017
Issue:3229017
Testing Done:
with fix:
l1# show ip ospf border-routers json
{
}
l1# show ip ospf vrf default border-routers json
{
}
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Don't directly use `time()` for generating sequence numbers for two
reasons:
1. `time()` can go backwards (due to NTP or time adjustments)
2. Coverity Scan warns every time we truncate a `time_t` variable for
good reason (verify that we are Y2K38 ready).
Found by Coverity Scan (CID 1519812, 1519786, 1519783 and 1519772)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
a) if show_function happened to be NULL we would leak json memory
b) json_lsa_type was being allocated but only used in the default case, leaking memory
c) json output would sometimes produce text output and that is incorrect
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
After `free()`ing a table also set it to NULL so when the instance
release function is called we know whether the pointer is valid or not.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Fix the following problems:
- Always free vertex next hops on `vertex_parent_free`
- Signalize failure on `ospf_spf_add_parent` when parent already exists
so the caller has the chance to `free()` any allocated resources.
- Don't reuse vertex next hops without the reference count logic in
`ospf_nexthop_calculation`. Instead allocate a new copy so it can be
`free()`d later without complications
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Every 1/2 hour my logs are filling up with this:
2022-11-26 13:54:47.531 [DEBG] ospfd: [P4PQ9-K4XFD] DR-Election[1st]: Backup 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [HBZ7F-65Y86] DR-Election[1st]: DR 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [H01MF-RN00N] DR-Election[2nd]: Backup 0.0.0.0
2022-11-26 13:54:47.531 [DEBG] ospfd: [R7BJ4-KP8JT] DR-Election[2nd]: DR 192.168.119.229
This should be guarded by an if check to ensure that the operator really
wants to see this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
My log file is filling up with:
2022-11-26 13:24:47.532 [DEBG] ospfd: [RY794-DQ7AK] interface 192.168.119.229 [2] join AllDRouters Multicast group.
Every 1/2 hour. There is nothing an operator needs to do here and nothing
that they can change. Let's guard this output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
As part of signal handler ospf_finish_final(), lsas are originated
and added to refresh queues are not freed.
One such leak is :
==2869285== 432 (40 direct, 392 indirect) bytes in 1 blocks are definitely lost in loss record 159 of 221
==2869285== at 0x484DA83: calloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==2869285== by 0x4910EC3: qcalloc (memory.c:116)
==2869285== by 0x199024: ospf_refresher_register_lsa (ospf_lsa.c:4017)
==2869285== by 0x199024: ospf_refresher_register_lsa (ospf_lsa.c:3979)
==2869285== by 0x19A37F: ospf_network_lsa_install (ospf_lsa.c:2680)
==2869285== by 0x19A37F: ospf_lsa_install (ospf_lsa.c:2941)
==2869285== by 0x19C18F: ospf_network_lsa_update (ospf_lsa.c:1099)
==2869285== by 0x1931ED: ism_change_state (ospf_ism.c:556)
==2869285== by 0x1931ED: ospf_ism_event (ospf_ism.c:596)
==2869285== by 0x494E0B0: thread_call (thread.c:2006)
==2869285== by 0x494E395: _thread_execute (thread.c:2098)
==2869285== by 0x19FBC6: nsm_change_state (ospf_nsm.c:695)
==2869285== by 0x19FBC6: ospf_nsm_event (ospf_nsm.c:861)
==2869285== by 0x494E0B0: thread_call (thread.c:2006)
==2869285== by 0x494E395: _thread_execute (thread.c:2098)
==2869285== by 0x19020B: ospf_if_cleanup (ospf_interface.c:322)
==2869285== by 0x192D0C: ism_interface_down (ospf_ism.c:393)
==2869285== by 0x193028: ospf_ism_event (ospf_ism.c:584)
==2869285== by 0x494E0B0: thread_call (thread.c:2006)
==2869285== by 0x494E395: _thread_execute (thread.c:2098)
==2869285== by 0x190F10: ospf_if_down (ospf_interface.c:851)
==2869285== by 0x1911D6: ospf_if_free (ospf_interface.c:341)
==2869285== by 0x1E6E98: ospf_finish_final (ospfd.c:748)
==2869285== by 0x1E6E98: ospf_deferred_shutdown_finish (ospfd.c:578)
==2869285== by 0x1E7727: ospf_finish (ospfd.c:682)
==2869285== by 0x1E7727: ospf_terminate (ospfd.c:652)
==2869285== by 0x18852B: sigint (ospf_main.c:105)
==2869285== by 0x493BE12: frr_sigevent_process (sigevent.c:130)
==2869285== by 0x494DCD4: thread_fetch (thread.c:1775)
==2869285== by 0x4905022: frr_run (libfrr.c:1197)
==2869285== by 0x187891: main (ospf_main.c:235)
Added a fix to cleanup all these queue pointers and corresponing lsas in it.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Steps to reproduce:
--------------------------
1. ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0 with DUT as DR.
2. ANVL: Listen (for up to 2 * <RxmtInterval> seconds) on DIface-0.
3. DUT: Send <OSPF-LSU> packet.
4. ANVL: Verify that the received <OSPF-LSU> packet contains a Network- LSA for network N1
originated by DUT, and the LS Sequence Number is set to <InitialSequenceNumber>.
5. ANVL: Establish full adjacency with DUT for neighbor Rtr-0-B on DIface-0 with DUT as DR.
6. ANVL: Listen (for up to 2 * <RxmtInterval> seconds) on DIface-0.
7. DUT: Send <OSPF-LSU> packet.
8. ANVL: Verify that the received <OSPF-LSU> packet contains a new instance of the
Network-LSA for network N1 originated by DUT, and the LS Sequence Number
is set to (<InitialSequenceNumber> + 1).
Both the test cases were failing while verifying the initial sequence number for network LSA.
This is because currently OSPF does not reset its LSA sequence number when it is going down.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
OSPF_MAX_LSA_SIZE does not represent the actual maximum size of LSA packets which may be larger than 1500 bytes. If relaying a large OSPF packet to the OSPF API, we do not allocate a big enough buffer to send over the API. This patch increases the maximum size of OSPF packets transmitted over the API.
Signed-off-by: ylopez <yoann.lopez@gmail.com>
When using debug mode, the ei parameter may be NULL. In that
case, do not display the log trace, otherwise a crash will
happen.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
```
(ospf) max-metric router-lsa administrative
```
Currently this running config depends at least one `area` with *active*
`network`, otherwise it will not occur.
The check on this dependency is redundant and wrong, just remove it.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
FRR implements a non-standard, but compatible approach for
sending update LSAs (it always send to 224.0.0.5) on P2MP
interfaces. This change makes it so acks are also sent to
224.0.0.5.
Since the acks are multicast, this allows an optimization
where we don't send back out the incoming P2MP interface
immediately allow time to rx multicast ack from neighbors
on the same net that rx'ed the original (multicast) update.
Signed-off-by: Lou Berger <lberger@labn.net>
