When creating a xfrm interface FRR is crashing when configured
with isis. This is because the weird pattern of not allocating
list's until needed and then allowing the crash when we have
a usage pattern that was not expected. Just always allocate
the different lists that a circuit needs.
(gdb) bt
(gdb)
Fixes#11432
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
The purpose of the Attach-bit is to accomplish inter-area routing. In other
venders, the Attached-bit is automatically set when a router is configured
as a L1|L2 router and has two adjacencies. When a L1 router receives a LSP
with the Attached-bit set it is supposed to create a default route pointing
toward the neighbor to provide a default path out of the L1 area.
ISIS implementation has been fixed to support the above definition:
Setting the Attach-bit is now the default behavior and we allow the user to
turn it off.
We will only set the Default Attach-bit when creating a L1 LSP, if we are
a L1|L2 router and have a L2 adjacency up.
When a L1 router receives a LSP with the Attach-bit set, we will create a
default route pointing to the L1|L2 router as the nexthop.
The default route will be removed if the LSP is received with the Attach-bit
cleared.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The code in isisd uses `circuit->area->isis` all the time
but we know that circuit now has a valid `circuit->isis` pointer
so let's use that and cleanup the long dereference.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
constants are int-typed, so adding something to an uint8_t yields an
int. Nevermind the fact that varargs calling conventions require
upcasting everything smaller than an int to an int anyways...
Signed-off-by: David Lamparter <equinox@diac24.net>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
When we call isis_adj_state_change with ISIS_ADJ_DOWN
we free the pointer, but we were still using the pointer
after it was freed. Cleanup the api to prevent this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you call into lsp_update with confusion, the lsp is purged
and we do not do anything with the created tlv's from parsing
the incoming data. To prevent the tlv's from being leaked
note confusion and delete the unneeded data.
Fixes: #5496
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rearrange the isisd northbound callbacks as following:
* isis_nb.h: prototypes of all northbound callbacks.
* isis_nb.c: definition of all northbound callbacks and their
associated YANG data paths.
* isis_nb_config.c: implementation of YANG configuration nodes.
* isis_nb_state.c: implementation of YANG state nodes.
* isis_nb_notifications.c: implementation of YANG notifications.
This should help to keep to code more organized and easier to
maintain.
No behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RFC 5303 states:
If the system ID and Extended Local Circuit ID of the neighboring
system are known (in adjacency three-way state Initializing or
Up), the neighbor's system ID SHALL be reported in the Neighbor
System ID field, and the neighbor's Extended Local Circuit ID
SHALL be reported in the Neighbor Extended Local Circuit ID field.
There is nothing written about only setting the Extended circuit ID of the
adjacency only when we bring the three-way adjacency up.
In fact, we should always update it, to avoid the problem described in #4783.
Fixes: #4783
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The new "event-counters" grouping is almost a 1:1 copy of the same
grouping from the IETF IS-IS module, except for the "lan-dis-changes"
leaf which was skipped (more work needs to be done to support it).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In preparation to Segment Routing:
- Update the management of Traffic Engineering subTLVs to the new tlvs parser
- Add Router Capability TLV 242 as per RFC 4971 & 7981
- Add Segment Routing subTLVs as per draft-isis-segment-routing-extension-25
Modified files:
- isis_tlvs.h: add new structure to manage TE subTLVs, TLV 242 & SR subTLVs
- isis_tlvs.c: add new functions (pack, copy, free, unpack & print) to process
TE subTLVs, Router Capability TLV and SR subTLVs
- isis_circuit.[c,h] & isis_lsp.[c,h]: update to new subTLVs & TLV processing
- isis_te.[c,h]: remove all old TE structures and managment functions,
and add hook call to set local and remote IP addresses as wellas update TE
parameters
- isis_zebra.[c,h]: add hook call when new interface is up
- isis_mt.[c,h], isis_pdu.c & isis_northbound.c: adjust to new TE subTLVs
- tests/isisd/test_fuzz_isis_tlv_tests.h.gz: adapte fuuz tests to new parser
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Historically, isisd has been carrying around its own red-black tree to
manage its LSP DB in. This replaces that with the newly-added
DECLARE_RBTREE_*. This allows completely removing the dict_* code.
Signed-off-by: David Lamparter <equinox@diac24.net>
Solve issue #4032
- Change MPLS-TE from global to per Area
- Add new mpls_te_area structure to area in replacement of global variable
isisMPLS_TE
- Move mpls-te from global to instance in frr-isisd.yang
- Change code in isis_te.c, isis_northbound.c, isis_cli.c, isis_pdu.c,
isis_lsp.c and isis_zebra.c accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Change MPLS-TE from global to per Area
- Add new mpls_te_area structure to area in replacement of global variable
isisMPLS_TE
- Move mpls-te frmo global to instance in frr-isisd.yang
- Change code in isis_te.c, isis_northbound.c, isis_cli.c, isis_pdu.c,
isis_lsp.c and isis_zebra.c accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Note that we do not return the actual tlv_type and offset
of the erroneous TLV. This is because unpacking tlvs currently
uses a chain of function calls, where the notification can only
be sent at the start of the chain, but the tlv_type and offset
information are only available at the end. Unless we change the
code to propagate those values, we have no way to feed them to
the notification. So these leafs are not generated.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
the original isisd code did not distinguish between
authentication_failure and authentication_type_failure, so
additional code had to be added to differentiate between the two
and to return the raw_pdu as requested by the IETF YANG model.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Note that the original IETF YANG model also included
a requirement to throttle such notifications so that they would
not be sent more often than once every 5 seconds. I did not
implement any throttling mechanism yet, mostly because I am
not sure whether this limit should apply to the entire isis daemon,
to each area, to each neighbor etc.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Also track when we received an LSP as do not reflood, as well as the
time when we last considered flooding it.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To allow easier debugging of LSP transmission scheduling, add a debug
mode where all tx-queue insertions/deletions are logged.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
