This code was deprecated in 5.0 and removed after a year.
It has not been in the code base and we forgot to update the
doc.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The documentation for this command was missing. Add a little
bit of data for people in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* add a vrf sub-command `[no] ipv6 router-id X:X::X:X`.
* add command `[no] ipv6 router-id X:X::X:X [vrf NAME]` for backward
compatibility.
* add a vrf sub-command `[no] ip router-id A.B.C.D` and make the old
one without `ip` an alias for it.
* add a command `[no] ip router-id A.B.C.D [vrf NAME]` for backward
comptibility and make the old one without `ip` an alias for it.
* add command `show ip router-id [vrf NAME]` and make
the old one without `ip` an alias for it.
* add command `show ipv6 router-id [vrf NAME]`.
* add ZAPI commands `ZEBRA_ROUTER_ID_V6_ADD`,
`ZEBRA_ROUTER_ID_V6_DELETE` and `ZEBRA_ROUTER_ID_V6_UPDATE`
for deamons to get notified of the IPv6 router-id.
* update zebra documentation.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Matching by dscp may now also be specified by its standard codepoint
(provided it has one), such as `cf0` or `af11`.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Extend PBR maps to discriminate by Differentiated Services Code Point and / or
Explicit Congestion Notification fields. These fields are used in the IP header
for classifying network traffic.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
DSCP: differentiated services codepoint
ECN: Explicit Congestion Notification
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Signed-off-by: Saurav Kumar Paul <saurav@cumulusnetworks.com>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Add note blocks to the topotest and topotest-json dev docs to
emphasize the need for generous BGP retry/convergence timers.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The tests work with the default settings of BFD meaning that bfdd is
able to recognize a 'down' link after ~900ms so a route recovery should
be visible in the RIB after 1 second.
In the current state only IPv4 is used (when using IPv6
autoconfiguration) within BFD, even though the recovery also affects
IPv6 routes. This is different to the current state of ospfd/ospf6d in
combination with BFD since both IPv4 and IPv6 sessions are used there.
The following topology is used:
+---------+
| |
eth-rt2 (.1) | RT1 | eth-rt3 (.1)
+----------+ 1.1.1.1 +----------+
| | | |
| +---------+ |
| |
| 10.0.2.0/24 |
| |
| eth-rt1 | (.2)
| 10.0.1.0/24 +----+----+
| | |
| | RT3 |
| | 3.3.3.3 |
| | |
(.2) | eth-rt1 +----+----+
+----+----+ eth-rt4 | (.1)
| | |
| RT2 | |
| 2.2.2.2 | 10.0.4.0/24 |
| | |
+----+----+ |
(.1) | eth-rt5 eth-rt3 | (.2)
| +----+----+
| | |
| | RT4 |
| | 4.4.4.4 |
| | |
| +----+----+
| 10.0.3.0/24 eth-rt5 | (.1)
| |
| |
| 10.0.5.0/24 |
| |
| +---------+ |
| | | |
+----------+ RT5 +----------+
eth-rt2 (.2) | 5.5.5.5 | eth-rt4 (.2)
| |
+---------+
Route recovery is tested on RT1. The focus here lies on the two
different routes to RT5. Link failures are generated by taking
down interfaces via the mininet Python interface on RT2 and RT3.
Hence routes are supposed to be adjusted to use RT3 when a link
failure happens on RT2 or vice versa.
Note that only failure recognition and recovery is "fast". BFD
does not monitor a link becoming available again.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces
the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB
could be configured through CLI or Yang.
Adjacency-SID are now using this SRLB for label allocation. SRLB could also
be used for SID-Binding (e.g. LDP to SR).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
A new config option `--disable-version-build-config`
allows you to show short version string by dropping
"configured with:" and all of its build configs
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Distinguish between unicast and broadcast opaque messages
in zebra handler code. Add cli and internal api changes to
have sharpd send unicast opaque messages. Add opaque cli
commands to the sharp user doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Description:
Added json support for the following PIM commands.
1. show ip mroute [vrf NAME] count [json]
2. show ip mroute vrf all count [json]
3. show ip mroute [vrf NAME] summary [json]
4. show ip mroute vrf all summary [json]
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Let the user know its possible to create BFD sessions with profiles
applied to it or apply profile to already created sessions.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Updated documentation for routers with a large route table, which breaks
SNMP/AgentX and in some conditions even crashes FRR. The documentation
proposal amends the SNMP configuration to exclude certain OID's that
are not needed in normal cases.
Format-fixed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Bart Vrancken <bart@abuse.io>
Revise new `show pbr` keys to be consistent with existing
json in other daemons
target->nexthop
id->tableId (where relevant)
isValid->valid
isInstalled->installed
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
a linux configuration gives some explanation on how to set up an evpn
overlay in network namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Include an IPv6 example for set src
And a note that the IP address has to exist. This is to try and make
people aware to avoid things like issue #4249https://github.com/FRRouting/frr/issues/4249
Signed-off-by: Tim Bray <tim@kooky.org>
Added a new show command "show ip multicast", display the multicast data
packet in and out on interface level.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Based on work originally by Mark Stapp <mjs@voltanet.io>.
Make it possible to iterate the typesafe lists in a const
context, as well as find items from them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
[above signoff was for the original version before modification]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Last patch sent in on the mailing list was in July 2018. If someone
sends a patch we can still pick it up, but practiced reality is quite
clearly PRs on github.
Signed-off-by: David Lamparter <equinox@diac24.net>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Issue: no ip msdp mesh-group <word> source command
deleting the mesh group, which might be used by the member.
Solution: no ip msdp mesh-group <word> source command, deletes
the mesh-group source.
Add a new cli command "no ip msdp mesh-group <word>" to delete
the mesh group.
Signed-off-by: Sarita Patra <saritap@vmware.com>
LDP ordered label distribution control only binds a label to
a FEC if it is the egress LSR, or the router received a label
binding for a FEC from the next hop router. In this mode,
an MPLS router will create a label binding for each FEC and
distribute it to its neighbors so long as he has a entry in
the RIB for the destination.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
this command is missing, compared with 'match ipv6 next-hop' command
available. Adding it by taking into account the backward compatible
effect when supposing that some people have configured acls with name
being an ipv4 address.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a bit of debug to show the listener sockets and who created them
to associate with strace output for a developer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Change the overview page's link for slack info to point to
the main FRR homepage section - that's where the self-serve
link/info is.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
