We currently have a global process queue for handling route
updates in bgp. This is fine, in general, except there are
places and times where we plug the queue for no new work
during certain peer states of bgp update delay. If we
happen to be processing multiple bgp instances on startup
why do we want to stop processing in vrf A when vrf B
is in a bit of a pickle?
Also this separation will allow us to start forward thinking
about how to fully integrate pthreads into route processing
in bgp.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The MH datastructures were being released before the paths that were
referencing them. Fix is to do the MH cleanup last.
The MH finish function has also been stripped down to only do a
datastructure cleanup i.e. avoid sending route updates etc.
Ticket: 31376
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Problem found that if a router-id was not defined or derived
initially, the bgp->router_id would be set to 0x0 and used
for determining auto-rd values. When bgp received a subsequent
router-id update from zebra, bgp would not completely process
the update since it was treated as updating an already derived
router-id with a new value, which is not desired. This also
could leave the auto rd/rt inforamation missing or invalid in
some cases. This fix allows updating the derived router-id if
the previous value was 0/0.
Ticket: CM-31441
Signed-off-by: Don Slice <dslice@nvidia.com>
Enhancement to update-delay configuration to allow setting globally
rather than per-instance. Setting the update-delay is allowed either
per-vrf or globally, but not both at the same time.
Ticket: CM-31096
Signed-off-by: Don Slice <dslice@nvidia.com>
* Added vtysh cli commands and functions to set/unset bgp daemons no-rib
option during runtime and withdraw/announce routes in bgp instances
RIB from/to Zebra.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
When deleting a dynamic peer, unsetting md5 password would cause
it to be unset on the listener allowing unauthenticated connections
from any peer in the range.
Check for dynamic peers in peer delete and avoid this.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
When setting authentication on a BGP peer in a VRF the listener is
looked up from a global list. However there is no check that the
listener is the one associated with the VRF being configured. This
can result in the wrong listener beiong configured with a password,
leaving the intended listener in an open authentication state.
To simplify this lookup stash a pointer to the bgp instance in
the listener on creating (in the same way as is done for NS-based
VRFS).
Signed-off-by: Pat Ruddy <pat@voltanet.io>
If you configure eBGP on loopbacks, you might miss setting the
ebgp-multihop option. Given that, the session will not be established
because of this. Now, the session is in Active state. When you update
your config afterwards and set the ebgp-multihop option to the
appropriate value, the session will still be in Active state. In fact,
it will be stuck in Active state and only services restart will help.
With this change, when set the ebgp-multihop option and no session was
established, reset the session.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
* Applied style suggestions by automated compliance check.
* Fixed function bgp_shutdown_enable to use immutable message string.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Peers are now automatically restarted by the reconnect timer instead
of a ManualStart event after lifting the administrative shutdown.
* Question of when to log what remains.
* Compiles and works as intended now.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Fixed integration in FSM and packet handling.
* Added CLI "show" output, incl. JSON.
* For review and testing only.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
* Changes allow administratively shutting down all peers of a BGP
instance.
* New CLI commands "[no] bgp shutdown" in vty shell.
* For review and testing only.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
This is the base patch that brings in support for Type-1 routes.
It includes support for -
- Ethernet Segment (ES) management
- EAD route handling
- MAC-IP (Type-2) routes with a non-zero ESI i.e. Aliasing for
active-active multihoming
- Initial infra for consistency checking. Consistency checking
is a fundamental feature for active-active solutions like MLAG.
We will try to levarage the info in the EAD-ES/EAD-EVI routes to
detect inconsitencies in access config across VTEPs attached to
the same Ethernet Segment.
Functionality Overview -
========================
1. Ethernet segments are created in zebra and associated with
access VLANs. zebra sends that info as ES and ES-EVI objects to BGP.
2. BGP advertises EAD-ES and EAD-EVI routes for the locally attached
ethernet segments.
3. Similarly BGP processes EAD-ES and EAD-EVI routes from peers
and translates them into ES-VTEP objects which are then sent to zebra
as remote ESs.
4. Each ES in zebra is associated with a list of active VTEPs which
is then translated into a L2-NHG (nexthop group). This is the ES
"Alias" entry
5. MAC-IP routes with a non-zero ESI use the alias entry created in
(4.) to forward traffic i.e. a MAC-ECMP is done to these remote-ES
destinations.
EAD route management (route table and key) -
============================================
1. Local EAD-ES routes
a. route-table: per-ES route-table
key: {RD=ES-RD, ESI, ET=0xffffffff, VTEP-IP)
b. route-table: per-VNI route-table
Not added
c. route-table: global route-table
key: {RD=ES-RD, ESI, ET=0xffffffff)
2. Remote EAD-ES routes
a. route-table: per-ES route-table
Not added
b. route-table: per-VNI route-table
key: {RD=ES-RD, ESI, ET=0xffffffff, VTEP-IP)
c. route-table: global route-table
key: {RD=ES-RD, ESI, ET=0xffffffff)
3. Local EAD-EVI routes
a. route-table: per-ES route-table
Not added
b. route-table: per-VNI route-table
key: {RD=0, ESI, ET=0, VTEP-IP)
c. route-table: global route-table
key: {RD=L2-VNI-RD, ESI, ET=0)
4. Remote EAD-EVI routes
a. route-table: per-ES route-table
Not added
b. route-table: per-VNI route-table
key: {RD=0, ESI, ET=0, VTEP-IP)
c. route-table: global route-table
key: {RD=L2-VNI-RD, ESI, ET=0)
Please refer to bgp_evpn_mh.h for info on how the data-structures are
organized.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
If _force_ is set, then ALL prefixes are counted for maximum instead of
accepted only. This is useful for cases where an inbound filter is applied,
but you want maximum-prefix to act on ALL (including filtered) prefixes.
For instance, we have a configuration like:
neighbor r1 maximum-prefix 10
neighbor r1 prefix-list custom in
!
ip prefix-list custom seq 1 permit 10.0.0.0/24
ip prefix-list custom seq 2 permit 10.0.1.0/24
This will accept only 2 prefixes and discard all others instead of
shutting down the session when 10 is reached.
With this new knob (force), we will count all received prefixes and shutdown
the session when 10 is reached.
The bigger problem is when you have lots of peers with full feed and such a
configuration like in an example.
This is kinda re-ordering of how to treat filter vs. maximum-prefix.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When a peer is bound to a peer-group, the GR flags set on the
peer are over-written.
Update the GR flags for the peer after it has been bound to a
peer-group.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
There can be cases where evpn traffic is not meshed across various
endpoints, but sent to a central pe. For this situation, remove the
nexthop unchanged default behaviour for bgp evpn. Also add route
reflector commands to bgp evpn node.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Problem reported that in many circumstances, RAs created in the
process of bringing up numbered IPv6 peers with extended-nexthop
capability enabled (for ipv4 over ipv6) were not stopped on the
interface when those peers were deleted. Found several circumstances
where this occurred and fix them in this patch.
Ticket: CM-26875
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Some competitive vendors like Cisco, Bird, OpenBGPD,
Nokia already have this by default enabled.
The list is here: https://github.com/bgp/RFC8212
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Support configurable options to control how link bandwidth is handled
by the receiver. The default behavior is to automatically honor the
link bandwidths received and use it to perform a weighted ECMP BUT only
if all paths in the multipath have associated link bandwidth; if one or
more paths do not have link bandwidth, normal ECMP is performed among
the multipaths. This behavior is as recommended by
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth.
The additional options available are to (a) completely ignore any link
bandwidth (i.e., weighted ECMP is effectively disabled), (b) skip paths
in the multipath which do not have link bandwidth and perform weighted
ECMP among the other paths (if at least some paths have the bandwidth)
or (c) use a default weight (value chosen is 1) for the paths which
do not have link bandwidth.
The command syntax is
bgp bestpath bandwidth <ignore|skip-missing|default-weight-for-missing>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement the code to handle the other route-map options to generate
the link bandwidth, namely, to use the cumulative bandwidth or to
base this on the number of multipaths. In the latter case, a reference
bandwidth is internally chosen - the implementation uses a value of
1 Gbps.
These additional options mean that the prefix may need to be advertised
if there is a link bandwidth change, which is a new criteria. Define a
new path (change) flag to support this and implement the advertisement.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
https://lists.frrouting.org/pipermail/frog/2020-March/000776.html
It was pointed out that we are not properly passing the nexthop
through and instead we were replacing the nexthop as a Route Server
with our own.
https://tools.ietf.org/html/rfc4456#section-4
10. Implementation Considerations
Care should be taken to make sure that none of the BGP path
attributes defined above can be modified through configuration when
exchanging internal routing information between RRs and Clients and
Non-Clients. Their modification could potentially result in routing
loops.
In addition, when a RR reflects a route, it SHOULD NOT modify the
following path attributes: NEXT_HOP, AS_PATH, LOCAL_PREF, and MED.
Their modification could potentially result in routing loops.
Modify the code such that when FRR is instructed to act as a
Route-Server to pass through the nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Ensure that the late registration for NHT done for IPv4 route exchange
over IPv6 GUA peering is not attempted for peer-groups, only for peers.
Fixes: "bgpd: Late registration of Extended Nexthop"
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
