Move most of the log messages to debug guards so they only get activated
if the user configured the proper debug level.
Current debug levels:
- Peer events.
- Zebra events.
- Network layer debugs.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
According to the RFC 5880 the transmission time should be mandated by
the slowest system.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Lets avoid garbage data on packets by zeroing the packet before setting
the fields/flags.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
It's been a year search and destroy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Adding fields "detect-multiplier" and "remote-detect-multiplier"
for JSON to to reflect changes in "show bfd peers output"
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
Adding new CLI clear bfd counters,
This CLI wil only reset Rx/Tx counters,
it will not reset session UP/DOWN and Zebra event count
Signed-off-by: Sayed Mohd Saquib <sayed.saquib@broadcom.com>
Use the interface VRF information instead of relying on the VRF specific
socket information.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
(cherry picked from commit c05c48621c)
Always bind the created sockets to their respective VRF devices. With
this it should be possible to run BFD on VRFs without needing to weaken
the security setting `net.ipv4.udp_l3mdev_accept=1`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Rearrange the bfdd northbound callbacks as following:
* bfd_nb.h: prototypes of all northbound callbacks.
* bfd_nb.c: definition of all northbound callbacks and their
associated YANG data paths.
* bfd_nb_config.c: implementation of YANG configuration nodes.
* bfd_nb_state.c: implementation of YANG state nodes.
This should help to keep to code more organized and easier to
maintain.
No behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
When using link-local addresses we must provide scope-id to the
operating system so it knows where to send packets.
Spotted by Pavel Ivashchenko (@zays26).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Don't be selective about what to observe, always observe all possible
aspects of the session that may change on run-time (i.e. bind address,
interface and VRF existence).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If a session is no longer able to send/receive packets, it is very
likely it will be down in a few milliseconds so lets speed up the
process and correctly mark it as down.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Otherwise the `thread_read` will keep waking us up to handle closing
sockets which are never unregistered.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Current autocompletion works only for simple "vrf NAME" case.
This commit expands it also for the following cases:
- "nexthop-vrf NAME" in staticd
- usage of $varname in many daemons
All daemons are updated to use single varname "$vrf_name".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adding a lock to protect the global running configuration doesn't
help much since the FRR daemons are not prepared to process
configuration changes in a pthread that is not the main one (a
whole lot of new protections would be necessary to prevent race
conditions).
This means the lock added by commit 83981138 only adds more
complexity for no benefit. Remove it now to simplify the code.
All northbound clients, including the gRPC one, should either run
in the main pthread or use synchronization primitives to process
configuration transactions in the main pthread.
This reverts commit 83981138fe.
upon vrf disable, an event informs bfd daemon that the vrf contexts
should be removed. in the case a vrf backend is netns based, all sockets
opened under that netns have to be closed. otherwise it is impossible
for the system to completely close the network namespace. that implies
that some interfaces may not be deleted, and may not be given back to
default vrf.
PR=65291
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Julien Floret <julien.floret@6wind.com>
bfd operational & config data may already applied and available, while
an external event requests for changing the vrf name. this change
updates the config and operational context of yang.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
if the bfd session is already enabled, then dynamically change the vrf
name if the vrf where bfd is executed changed its name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add source address to northbound when creating sessions with this
information. It is not possible to change source address after the
session was created, but we should be able to set it to make IPv6 work.
Spotted by Philippe Guibert.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This helps northbound to create the `bfd` node on the configuration
output sooner than adding a peer.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Build will fail with `Werror` enabled with:
```
CC bfdd/bfdd_cli.o
In file included from ./lib/frratomic.h:21:0,
from ./lib/memory.h:22,
from ./lib/vector.h:25,
from ./lib/command.h:25,
from bfdd/bfdd_cli.c:23:
./config.h:665:0: error: "_FILE_OFFSET_BITS" redefined [-Werror]
#define _FILE_OFFSET_BITS 64
^
In file included from /usr/include/iso/stdlib_iso.h:49:0,
from /usr/include/stdlib.h:37,
from ./lib/memory.h:20,
from ./lib/vector.h:25,
from ./lib/command.h:25,
from bfdd/bfdd_cli.c:23:
/opt/gcc-5.1.0/lib/gcc/i386-pc-solaris2.11/5.1.0/include-fixed/sys/feature_tests.h:231:0: note: this is the location of the previous definition
#define _FILE_OFFSET_BITS 32
^
In file included from ./lib/thread.h:24:0,
from ./lib/vty.h:27,
from ./lib/command.h:26,
from bfdd/bfdd_cli.c:23:
./lib/zebra.h:271:2: error: #warning "assuming 4-byte alignment for CMSG_SPACE" [-Werror=cpp]
#warning "assuming 4-byte alignment for CMSG_SPACE"
^
./lib/zebra.h:277:2: error: #warning "assuming 4-byte alignment for CMSG_LEN" [-Werror=cpp]
#warning "assuming 4-byte alignment for CMSG_LEN"
^
cc1: all warnings being treated as errors
Makefile:6876: recipe for target 'bfdd/bfdd_cli.o' failed
gmake[1]: *** [bfdd/bfdd_cli.o] Error 1
```
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Lets allow specification to accept microseconds, but limit the timers
configuration in FRR to milliseconds (minimum is 10 ms and maximum is 60
seconds).
This matches the RFC 5880 and the IETF BFD YANG draft model.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add command 'no bfd' to remove all BFD sessions configuration and fix
other daemon integration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
```
warnings: BFD: [EC 100663317] YANG model "frr-bfdd@*" not embedded, trying external file
```
Embed the YANG model into the binary to avoid reading an external file.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When the remote discriminator hasn't been assigned yet, then we can't
return a value of 0. The value '0' is an invalid discriminator and the
yang handlers will complain about it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Lets start using the new BFD yang model and translate the BFD session
configuration commands to use the northbound.
One important change: all sessions will default to use
`VRF_DEFAULT_NAME` (usually "default") when no VRF is configured. All
places which search for BFD sessions must now take this into account.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
These functions are going to be used by the future northbound
implementation to handle BFD sessions.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
when working with a standard vrf backend, bfdd ignores that and tries to
create and configure bfd sockets for each vrf, which will fail for the
second vrf discovered, since the network namespace used is the same, and
it is not possible to use same socket settings twice. Handle this case,
and avoids to reinitialise sockets.
This patch however does not leverage bfd support for vrf-lite.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
MTYPE definitions should be local to the file using them whereever
possible. Also remove some superfluous ;
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The `access-list ...` command was causing bfdd to return
'unknown commands'. Make bfdd at least cognizant of
access-lists enough to not create strange error messages
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When selecting to run bfdd with -N allow the namespace passed
in to be added to the $frr_statedir/<namespace name>/bfdd.sock
If --bfdctl is passed in that will override the -N option.
If neither --bfdctl or -N is passed in then the default
of $frr_statedir/bfdd.sock is used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this structure contains the bfdd_privs structure in charge of the
privilege settings. The initialisation has moved a bit, in order that
the preinit settings are done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf keyword is possible through show bfd command. However, there is
a change with previous version, since that show command was accepting
vrf keyword, only after peer keyword. Now, the vrf keyword is accepted,
but before peer keyword.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when configuring bfd peers, some parameters may or may not be taken into
account to search for a previous context. This has as consequence that
the result is different with the order of vty commands:
bfd
peer 4.5.6.7 vrf AAAA local-address 1.2.3.5
end
peer 4.5.6.7 vrf AAAA <--- should not create new session
end
Similarly, the user thinks it has overwritten some key parameters like
local address, whereas it is wrong.
here, some informational message should be present.
bfd
peer 4.5.6.7 vrf AAAA
end
peer 4.5.6.7 vrf AAAA local-address 1.2.3.5
<--- should inform that the key lookup 1.2.3.5 is wrong
end
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
parse observer list, and update bs context if vrf pointer is not yet populated.
this is helpful for validation, but also will permit bfd to send
notification to remote daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
messages from daemons to bfd daemons go through zebra. zebra reuses the
vrf identifier to send messages to bfd.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf initialisation is done. hooks are installed. no specific action is
done, except the vrf initialisation.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in the case vrf-lite is used, it is possible to call SO_BINDTODVICE, by
using vrf_socket() call.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
it is possible to configure both iface and vrfname. also, the
appropriate vrf is used, in case an iface is given.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in order to be able to create sockets on separate namespaces, add the
privs setting needed.
the former capability is needed to use SO_BINDTODEVICE option.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
there is no specific constraints that should prevent from configuring a
multihop bfd session within a bfd session.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this is a change to be more consistent with function naming convention
in bfd. a small change for 3 functions.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
