Currently zebra when you compile without router advertisements
will just say something like `cannot handle message 42`. Which
is not terribly useful to an end user.
Add some smarts to the zapi message handling to just do nothing
and output a debug if someone has it turned on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reported by testing agency that rfc 4861 section 6.2.1 states
that all implementations must have a configuration knob to change
the setting of the advertised retransmit timer sent in RA packets.
This fix adds that capability.
Ticket: CM-29199
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reported by testing agency that rfc 4861 section 6.2.1 states
that all implementations must have a configuration knob to change
the setting of the advertised hop limit. This fix adds that
capability.
Ticket: CM-29200
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The rtadv code has two types of sockets:
a) namespace -> Where each zvrf get's it's own socket
b) vrf lite -> Where we get 1 socket for everything
When we were terminating a vrf we were *always*
killing the (b) socket. This is a mistake in
that other vrf's may need to be communicating.
Modify the code on vrf shutdown to only disable
that vrf's event processing and when we actually
terminate we shut the socket.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Memory leak found where ipv6 global prefixes added to the router
advertisement prefix lists were not deleted when the process was
killed.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add in a few missing stub route-advert functions; these are
needed to build frr with v6 route adverts disabled.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
RFC 4861 states that ipv6 RA messages sent out an interface should
contain all global ipv6 addresses on that interface. This fix adds
that capability. To override the default flags and timer settings
for a particular prefix, the existing "ipv6 nd prefix ..." command
should be used via vtysh under the appropriate interface.
Ticket: CM-20363
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing agency that RFC4861 section 6.2.5
states that a router should send an RA with a lifetime of 0
before ceasing to send RAs on the interface, or when the interace
is shutdown, or the router is shutdown. This fix adds that capability.
Ticket: CM-27061
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The code for when a new vrf is created to properly handle
router advertisement for it is messed up in several ways:
1) Generation of the zrouter data structure should set the rtadv
socket to -1 so that we don't accidently close someone elses
open file descriptor
2) When you created a new zvrf instance *after* bootup we are XCALLOC'ing
the data structure so the zvrf->fd was 0. The shutdown code was looking
for the >= 0 to know if the fd existed (since fd 0 is valid!)
This sequence of events would cause zebra to consume 100% of the
cpu:
Run zebra by itself ( no other programs )
ip link add vrf1 type vrf table 1003
ip link del vrf vrf1
vtysh -c "configure" -c "no interface vrf1"
This commit fixes this issue.
Fixes: #5376
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in the case the vrf backend is vrf-lite, there is no need to have
separate sockets. use a socket located in zrouter, so that when needing
the socket, a common API is used. that API will return the appropriate
socket value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when network namespace is used as vrf backend, there is need to have
separate contexts for rtadv contexts.
route advertisements have to look for appropriate interface based on
zvrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in the case the vrf backend is vrf-lite, there is no need to have
separate sockets. use a socket located in zrouter, so that when needing
the socket, a common API is used. that API will return the appropriate
socket value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when network namespace is used as vrf backend, there is need to have
separate contexts for rtadv contexts.
route advertisements have to look for appropriate interface based on
zvrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
CLANG was throwing an error because struct rtadv_rdnss(dnssl) was being
initialized with = {0} instead of {}. Change to be the latter.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a v6 RA packet with an optional
ND_OPT_SOURCE_LINKADDR take that data and construct the
v4 to v6 neighbor entry for that interface to allow
v4 w/ v6 nexthops to work with only global v6 addresses
on an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The CMSG_FIRSTHDR was broken on solaris pre version 9. Version 9
was released in May of 2002 and EOL'ed in 2014. Version 8 EOL'ed
in 2012. Remove special case code for a little used platform
that has not seen the light of day in a very long time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The warning given by PVS-Studio is related to per-element overflow (there is
no real overflow, because of how elements are mapped in the union). This
same warning is typically reported by Coverity, too.
Signed-off-by: F. Aragon <paco@voltanet.io>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
