This is causing build issues on BSD by including (transitively)
`linux/mroute6.h` - try to address by disentangling the headers a bunch.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem Statement:
==================
(rcv1)-----A----B---C
v3 enabled with src 90.0.0.1
|
(rcv2)--
v2 enable with src none
rcv1 sends the packet in INCLUDE mode, rcv2 sends the IGMPv2 report
and PIM convers this report into exclude mode.
As per the state machine the group structure was
getting added and deleted. As group gets deleted the mroute for 90.0.0.1
and recreated back.
This effects the end to end trafiic.
Root Cause Analysis:
====================
As per state machine
INCLUDE (A) IS_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Group Timer=GMI
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=Group Timer
Delete (X-A)
Delete (Y-A)
Send Q(G,A-Y)
Group Timer=GMI
The above equations were getiing calulated for IP address
90.0.0.1 and 0.0.0.0
This results in group creation deletion.
Fix:
====
As per RFC 4604.
drop the exclude mode, IGMP reports, if destnation group is
SSM based.
EXCLUDE
mode does not apply to SSM addresses, and an SSM-aware router will
ignore MODE_IS_EXCLUDE and CHANGE_TO_EXCLUDE_MODE requests in the SSM
range,
Signed-off-by: Abhishek N R <abnr@vmware.com>
Signed-off-by: Vishal Dhingra <rac.vishaldhingra@gmail.com>
Fix the code as per RFC 2236 section 2.5:
Note that IGMP messages may be longer than 8 octets, especially
future backwards-compatible versions of IGMP. As long as the Type is
one that is recognized, an IGMPv2 implementation MUST ignore anything
past the first 8 octets while processing the packet. However, the
IGMP checksum is always computed over the whole IP payload, not just
over the first 8 octets.
Fixes: #10331
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
As per test case IGMP Conformance test case 5.6, report
messages longer than 8 octets should be accepted to support
future-backward compatibilty.
Fix the code as per RFC 2236 section 2.5:
Note that IGMP messages may be longer than 8 octets, especially
future backwards-compatible versions of IGMP. As long as the Type is
one that is recognized, an IGMPv2 implementation MUST ignore anything
past the first 8 octets while processing the packet. However, the
IGMP checksum is always computed over the whole IP payload, not just
over the first 8 octets.
Fixes: #10331
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modifying name of struct igmp_sock to struct gm_sock, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Modifying name of struct igmp_group to struct gm_group, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Test case 5.10 sends leave message to unicast address, the leave
packet is accepted and a query message is sent in response to this.
No validation for address is present in the function
Add check for addresses as per RFC. Leave messages are allowed only
sent to either ALL-ROUTERS (224.0.0.2) or group address.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Issue: When an IGMPv2 leave packet is received, it did not validate
the checksum and hence the packet is accepted and group specific
query is sent out in response to this.
Due to this IGMP conformance test case 6.1 failed.
https://github.com/FRRouting/frr/issues/6868
Fix: Validate the checksum for all IGMP packets
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Feature of mtrace only IGMP sockets on pim sm and pim
ssm interfaces. Modifed IGMP socket creation and show
igmp interface command output.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When handling a igmp request, fill in group address before
we attempt to output debug information on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
