- Remove OSPD_SR route type
- Check that Segment Routing is enable only in default VRF
- Add comment for SRGB in lib/mpls.h
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This is an implementation of draft-ietf-ospf-segment-routing-extensions-24
and RFC7684 for Extended Link & Prefix Opaque LSA.
Look to doc/OSPF_SR.rst for implementation details & known limitations.
New files:
- ospfd/ospf_sr.h: Segment Routing structure definition (SubTLVs + SRDB)
- ospfd/ospf_sr.c: Main functions for Segment Routing support
- ospfd/ospf_ext.h: TLVs and SubTLVs definition for RFC7684
- ospfd/ospf_ext.c: RFC7684 Extended Link / Prefix implementation
- doc/OSPF-SRr.rst: Documentation
Modified Files:
- doc/ospfd.texi: Add new Segment Routing CLI command definition
- lib/command.h: Add new string command for Segment Routing CLI
- lib/mpls.h: Add default value for SRGB
- lib/route_types.txt: Add new OSPF Segment Routing route type
- ospfd/ospf_dump.[c,h]: Add OSPF SR debug
- ospfd/ospf_memory.[c,h]: Add new Segment Routing memory type
- ospfd/ospf_opaque.[c,h]: Add ospf_sr_init() starting function
- ospfd/ospf_ri.c: Add new functions to Set/Get Segment Routing TLVs
Add new ospf_router_info_lsa_upadte() to send Opaque LSA to ospf_sr.c()
- ospfd/ospf_ri.h: Add new Router Information SR SubTLVs
- ospfd/ospf_spf.c: Add new scheduler when running SPF to trigger
update of NHLFE
- ospfd/ospfd.h: Add new thread for Segment Routing scheduler
- ospfd/subdir.am: Add new files
- vtysh/Makefile.am: Add new ospf_sr.c file for vtysh
- zebra/kernel_netlink.c: Add new OSPF_SR route type
- zebra/rt_netlink.[c,h]: Add new OSPF_SR route type
- zebra/zebra_mpls.h: Add new OSPF_SR route type
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add a daemon that will allow us to test the zapi
as well as test route install/removal times from
the kernel.
The current commands are:
install route <starting ip address> nexthop <nexthop> (1-1000000)
This command starts installing at <starting ip address>/32
(1-100000) routes that it auto-increments by 1
Installation start time is noted in the log and finish
time is noted as well.
remove routes <starting ip address> (1-1000000)
This command removes routes at <starting ip address>/32
and removes (1-100000) routes created by the install route
command.
This code can be considered experimental and *is not*
something that should be run in a production environment.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The function clear_nhlfe_installed is to be called
when we get a install failure of some sort for
a lsp change. Since an install failure can happen
in both linux and openBSD moving the function call
northbound is a good idea.
I've also added it to the kernel_del_lsp for completeness
on failure as well, even though neither linux or openBSD
currently can fail a uninstall.
This still leaves the hole where if we have multiple
nhlfes and have an install failure we are not quite
doing the right thing by just blanketly calling
clear_nhlfe_installed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
For NHRP, EIGRP and LDP( This is for consistency as opposed to correctness )
assign some new values to routes to be installed into the kernel
so we can know who owns them later.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
the ipv4_ll address used for 5549 routes does not need
to be figured out every single time that we attempt
to install/remove a route of that type.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Ticket: CM-14313
Reviewed By:
Testing Done: bgpmin, ospfmin, bgp_kitchen_sink_test
'ip route show' displays all routes as belonging to protocol zebra.
The user has to run an additional command (in vtysh) to get the actual
source of a route (bgp/ospf/static etc.). This patch addresses that by
pushing the appropriate protocol string into the protocol field of the
netlink route update message. Now you can see routes with the correct
origin as well as filter on them (ip route show proto ospf).
'ospf' is used for both IPv4 and IPv6 routes, even though the OSPF
version is different in both cases.
Sample output (old):
9.9.12.13 via 69.254.2.38 dev swp3.2 proto zebra metric 20
9.9.13.3 proto zebra metric 20
nexthop via 69.254.2.30 dev swp1.2 weight 1
nexthop via 69.254.2.34 dev swp2.2 weight 1
nexthop via 69.254.2.38 dev swp3.2 weight 1
Sample output (new):
9.9.12.13 via 69.254.2.38 dev swp3.2 proto bgp metric 20
9.9.13.3 proto bgp metric 20
nexthop via 69.254.2.30 dev swp1.2 weight 1
nexthop via 69.254.2.34 dev swp2.2 weight 1
nexthop via 69.254.2.38 dev swp3.2 weight 1
The reading if unicast routes from the kernel acts subtly differently
between reading in the routes from the kernel on startup and
reading a new route or getting a response for a route.
Add startup flag(currently ignored) so that we can start
consolidating the functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We shouldn't have platform-agnostic code (e.g. zebra/interface.c)
calling platform-specific functions (e.g. netlink_neigh_update).
This commit introduces the kernel_neigh_update() function, which then
has to be implemented by all supported platforms. Currently only Linux
implements this function, which is only used by the RTADV code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Convert the rest of zebra over to use a Namespae and VRF.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch lets the netlink sockets work per VRF.
* The definition of "struct nlsock" is moved into zebra/rib.h.
* The previous global variables "netlink" and "netlink_cmd" now
become the members of "struct zebra_vrf", and are initialized
in zebra_vrf_alloc().
* All relative functions now work for a specific VRF, by adding
a new parameter which specifies the working VRF, except those
functions in which the VRF ID can be obtained from the interface.
* kernel_init(), interface_list() and route_read() are now also
working per VRF, and moved from main() to zebra_vrf_enable().
* A new function kernel_terminate() is added to release the
netlink sockets. It is called from zebra_vrf_disable().
* Correct VRF ID, instead of the previous VRF_DEFAULT, are now
passed to the functions of processing interfaces or route
entries.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts:
lib/memtypes.c
zebra/rib.h
zebra/rt_netlink.c
Conflicts:
zebra/if_netlink.c
zebra/if_sysctl.c
zebra/kernel_null.c
zebra/rib.h
zebra/rt_netlink.c
zebra/rt_netlink.h
Zebra: Use a fixed route metric when populating kernel
The route metric is not used by the Linux kernel and is irrelevant to
the forwarding decision made by the kernel. Metric is a parameter used
only by a routing protocol to compute best path(s) and to communicate this
info to its peers. Consequently, there is no value in pushing the metric
provided by a protocol daemon to the kernel.
There is a significant advantage, at least on the Linux kernel, in pushing
a constant metric with a route populated by zebra. The metric is used as a
priority field in the kernel and modifying the metric due to say topology
changes causes multiple routes to be inserted into the kernel, with differing
priorities instead of replacing the existing one. This prevents us from
using replace semantic when a route changes.
So, this patch pushes a constant metric with a route populated by zebra.
Change default value of variable NL_PKT_BUF_SIZE to 8192UL. Cf.
NLMSG_GOODSIZE definition of linux in include/linux/netlink.h for detail.
Previously, on platforms with a page size greater than 8192, if you had added
too many interfaces, zebra would not have enough buffer space to get the entire
interface list. This resulted in an incomplete interface list.
From: 高鹏 <gpstrive@gmail.com>
[updated to apply after FPM patches]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* zebra/{rib.h,zebra_rib.c}
Add nexthop_type_to_str(), which returns a human-readable string
corresponding to a nexthop type.
* zebra/rt_netlink.[hc]
- Add new header file that exposes some existing and new
netlink-related functions from rt_netlink.c to the rest of
zebra.
addattr32
addattr_l
rta_addattr_l
nl_msg_type_to_str (new)
nl_rtproto_to_str (new)
- Use nexthop_type_to_str() instead of the static array
'nexthop_types_desc'.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
