NHG and DST (VTEP-IP) are mutually exclusive attributes. If DST is
present the kernel ignores NHG.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
NHG is activated i.e. programmed in the dataplane only if there
are active-VTEPs associated with it. When a NHG is de-activated
all the remote-mac entries associated with it need to be removed
before the NHG is removed.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The lookup for non default VRFs was always using a tableId; if not
provided, we were defaulting to RT_TABLE_MAIN. This is fine for the
default VRF but not for others. As a result, the command was silently
failing for non-default VRFs unless we also specified the correct tableId.
Fix this by only performing the lookup using the tableId if it is
provided; else use zebra_vrf_table.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
A couple NHG messages we were logging as errors are a bit spammy
in usecases where you routinely add/remove interfaces (VM heavy
deployments). Its not really an error a user cares about and
more for a developer to know what went wrong after the fact so
it makes more sense for these to be under a debug rather than
an error since seeing them does not implicitly mean error during
those usecases.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Issue:
Configure msdp mesh mg1 for 2 groups.
ip msdp mesh-group mg1 member 1.1.1.1
ip msdp mesh-group mg1 member 1.1.1.2
Remove mg1 for 1.1.1.1
no ip msdp mesh-group mg1 member 1.1.1.1
mg1 for 1.1.1.1 still present. This is fixed.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue:
Configure RP.
ip pim rp 20.0.0.1 239.1.1.1/32
ip pim rp 20.0.0.1 239.1.1.2/32
Remove RP.
no ip pim rp 20.0.0.1 239.1.1.1/32
Rp is not removed. This is fixed now.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The pim_version.[c|h] files are never used and we are getting
warnings about PIM_VERSION changing pointer sizes from
newer versions of the compiler. I see no reason to keep this
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In the case of some linux distros the /var/run dir is mounted
with tmpfs so in every reboot it's removed.
Then the frrcommon.sh will recreate it without 'x' perm
So no pid file cannot be created in /var/run/frr
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Replace the unclear error message:
```
% Failed to edit configuration.
YANG error(s):
Schema node not found.
YANG path: /frr-bfdd:bfdd/bfd/sessions/single-hop[dest-addr='192.168.253.6'][interface=''][vrf='default']/minimum-ttl
```
With:
```
frr(config-bfd-peer)# minimum-ttl 250
% Minimum TTL is only available for multi hop sessions.
! or
frr(config-bfd-peer)# echo
% Echo mode is only available for single hop sessions.
frr(config-bfd-peer)# echo-interval 300
% Echo mode is only available for single hop sessions.
```
Reported-by: Trae Santiago
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
For each afi/safi of 'show bgp summary', display the peer description
each time needed. This information is useful, for instance in the case
of a device connected with multiple peers.
The topotest all_protocol_startup is changed accordingly.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
During times of network trauma and when we are at large network scale
the process_remote_macip_add function can issue a zlog_warn for
a common occurrence. Modify the code to be a debug statement.
This behavior is the same now as the process_remote_macip_del function
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add an api that allows a caller in the zebra main pthread to
process the queue of pending dplane updates. The caller supplies
a function to call to test each pending context. Selected
contexts are dequeued, and freed without being processed.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
There are two fixes in this commit -
1. Prevent implicit deletion of (*,G) entries during (S,G) cleanup.
This is done by creating a dummy reference on all (*,G) entries.
This is needed for a hash-walk based table cleanup.
2. Free up the SG hash table when the VRF is deleted.
Ticket: CM-30151
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
pim is enabled internally/implicitly on the vxlan termination device
and displaying that can confuse the admin and tools (such as
frr-reload).
Ticket: CM-30180
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Earlier type-3 ESI was the only format supported for evpn-mh. Updated the
CLI to allow a 10-byte type-0 ESI.
Both type-0 and type-3 ESIs are statically configured; just in two different
ways -
1. type-0 is configured as a complete 10-byte string
2. type-3 is configured as a 6-byte es-sys-mac and a 3-byte
local-discriminator.
Sample config -
!
interface hostbond1
evpn mh es-id 00:44:38:39:ff:ff:01:00:00:01
!
This is a CLI-only change and has no functional impact.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
As code comment states, 1 count of MTYPE_COMPLETION is leaked for each
autocompleted token. Let's manually decrement the counter before passing
the pointer to readline.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add routines to walk the LSP table and generate FPM updates for all
entries. A walk of the LSP table is triggered when (re-)connecting
to an FPM.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Commit: 1d376ff539 removed
the code to find nexthops for the POINTOMULTIPOINT and
replaced it with a generic bit of code that was
supposed to handle both POINTOPOINT and POINTOMULTIPOINT
the problem is that the ospf rfc states that the
network mask on point to multipoint should be /32
which will not allow you to properly do a prefix match
on it against the network.
Restore original behavior as much as possible and leave
the new POINTOPOINT code alone.
Fixes: #7624
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Export netlink_lsp_msg_encoder() and use it to encode and send netlink
messages concerning LSP updates to connected FPMs.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
