When the remote mac is deleted by bgpd we can end up with an auto mac
entry in zebra if there are neighs referring to the mac. The remote sequence
number in the auto mac entry needs to be reset to 0 as the mac entry may
have been removed on all VTEPs (including the originating one).
Now if the MAC comes back on a remote VTEP it may be added with MM=0 which
will NOT be accepted if the remote seq was not reset in the previous step.
Ticket: CM-22707
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
This is a fixup to commit -
f32ea5c07 - zebra: act on kernel notifications for remote neighbors
The original commit handled a race condition between kernel and zebra
that would result in an inconsistent state i.e.
kernel has an offload/remote neigh
zebra has a local neigh
The original commit missed setting the neigh to active when zebra
tried to resolve the inconsistency by modifying the local neigh to
remote neigh on hearing back its own kernel update. Fixed here.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-22700
When events cross paths between bgp and zebra bgpd could end up with a
dangling local MAC entry. Consider the following sequence of events on
rack-1 -
1. MAC1 has MM sequence number 1 and points to rack-3
2. Now a packet is rxed locally on rack-1 and rack-2 (simultaneously) with
source-mac=MAC1.
3. This would cause rack-1 and rack-2 to set the MM seq to 2 and
simultaneously report the MAC as local.
4. Now let's say on rack-1 zebra's MACIP_ADD is in bgpd's queue. bgpd
accepts rack-3's update and sends a remote MACIP add to zebra with MM=2.
5. zebra updates the MAC entry from local=>remote.
6. bgpd now processes zebra's "stale local" making it the best path.
However zebra no longer has a local MAC entry.
At this point bgpd and zebra are effectively out of sync i.e. bgpd has a
local-MAC which is not present in the kernel or in zebra.
To handle this window zebra should send a local MAC delete to bgpd on
modifying its cache to remote.
Ticket: CM-22687
Reviewed By: CCR-7935
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The `struct zebra_ns` data structure is being used
for both router information as well as support for
the vrf backend( as appropriate ). This is a confusing
state. Start the movement of `struct zebra_ns` into
2 things `struct zebra_router` and `struct zebra_ns`.
In this new regime `struct zebra_router` is purely
for handling data about the router. It has no knowledge
of the underlying representation of the Data Plane.
`struct zebra_ns` becomes a linux specific bit of code
that allows us to handle the vrf backend and is allowed
to have knowledge about underlying data plane constructs.
When someone implements a *bsd backend the zebra_vrf data
structure will need to be abstracted to take advantage of this
instead of relying on zebra_ns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The block comments from a couple commits were not following
proper style. Fix.
Fix SA warning that had snuck in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when the is_router condition changes for a locally learnt
neighbor, it is informed to BGP only if it is active i.e., the MAC is
also locally learnt.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
1. Failed test
2. vxlan_routing_test.py
Use boolean variables instead of unsigned int for certain VxLAN-EVPN
flags which are really used as boolean.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
Along with a subsequent, related commit
When a remote MAC goes away, but there are neighbors referring to it,
ensure that when the last remote neighbor goes away, the MAC is
uninstalled from the kernel and no longer considered as remote.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22130
Reviewed By: CCR-7777
Testing Done:
1. Replicated failed scenario and verified with fix.
2. evpn-min
When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
The RB-Tree used to store rmac information was not properly
handling the v6 address family. Modify the code to allow
this handling.
Cleans up this error message:
zebra[2231]: host_rb_entry_compare: Unexpected family type: 10
That is being seen, This fixes some connectivity issues being seen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a header to cleanup no declaration and properly
wrapper some variables to appropriate #ifdef.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handle Remote Neigh entry state change from Router to Host.
Remote MAC-IP update may not continue EVPN NA Extended community,
Zebra need to accomodate if router_flag change for existing neigh
and install with or without Router Flag (R-bit).
Testing:
Have locally run MAC/IP (neigh entry) with R-bit set,
Checke on remote VTEP 'show bgp evpn route ...mac ip' and
'show evpn arp-cache ...' contians router flag.
Change host to remove R-bit, which locally learnt entry removes
Router flag. This results in remote vtep to remove R-bit from
neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Neigh update can have router_flag change, from unset to set and
viceversa. This is the case where MAC, IP and VLAN are same but
entry's flag moved from R to not R bit and reverse case.
Router flag change needs to trigger bgpd to inform all evpn peers
to remove from the evpn route.
Testing Done:
Send GARP with and without R bit from host and validate neigh entry
and evpn neigh and mac-ip route entry in zebra and bgpd.
Check Peer VTEP evpn route entry where router flag is (un)set.
With R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP1(uplink-1) (27.0.0.9)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8 ND:Router
Flag
AddPath ID: RX 0, TX 1261
Last update: Wed Aug 15 20:52:14 2018
Without R-bit
Route [2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
VNI 1001
Imported from
27.0.0.16:5:[2]:[0]:[0]:[48]:[00:1f:2f:db:45:a6]:[128]:[2006:33:33:2::10]
4435 5551
27.0.0.16 from MSP2(uplink-2) (27.0.0.10)
Origin IGP, valid, external, bestpath-from-AS 4435, best
Extended Community: RT:5551:1001 ET:8
AddPath ID: RX 0, TX 1263
Last update: Wed Aug 15 20:53:10 2018
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The neigh update can come prior to mac add update.
In this case, the mac will be auto created for the vni.
set router flag to local neigh update for mac with auto flag.
The neigh update will be informed to bgpd once local mac is learnt.
Unset router flag if the neigh update comes without the router flag
for an existing neigh entry.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Enhance the EVPN MAC and Neighbor cache display to show additional
information such as the mobility sequence numbers and the state.
Ensure that the neighbor state is set in a couple of places so
that the display is correct.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement procedures similar to what is specified in
https://tools.ietf.org/html/draft-malhotra-bess-evpn-irb-extended-mobility
in order to support extended mobility scenarios in EVPN. These are scenarios
where a host/VM move results in a different (MAC,IP) binding from earlier.
For example, a host with an address assignment (IP1, MAC1) moves behind a
different PE (VTEP) and has an address assignment of (IP1, MAC2) or a host
with an address assignment (IP5, MAC5) has a different assignment of (IP6,
MAC5) after the move. Note that while these are described as "move" scenarios,
they also cover the situation when a VM is shut down and a new VM is spun up
at a different location that reuses the IP address or MAC address of the
earlier instance, but not both. Yet another scenario is a MAC change for an
attached host/VM i.e., when the MAC of an attached host changes from MAC1 to
MAC2. This is necessary because there may already be a non-zero sequence
number associated with MAC2. Also, even though (IP, MAC1) is withdrawn before
(IP, MAC2) is advertised, they may propagate through the network differently.
The procedures continue to rely on the MAC mobility extended community
specified in RFC 7432 and already supported by the implementation, but
augment it with a inheritance mechanism that understands the relationship
of the host MACIP (ARP/neighbor table entry) to the underlying MAC (MAC
forwarding database entry). In FRR, this relationship is understood by the
zebra component which doubles as the "host mobility manager", so the MAC
mobility sequence numbers are determined through interaction between bgpd
and zebra.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a host moves and is locally reachable, if the local neighbor event
is received before the local MAC event, flag the neighbor as inactive
just as would happen in the case of a new host. This ensures that the
MACIP route will get originated as soon as the local MAC event is got.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
show evpn mac vni all
show evpn mac vni x
does not display local svi and anycast mac into count.
Ticket:CM-20456
Testing Done:
Before:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 4
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
dell-s6000-07#
After:
TOR1# show evpn mac vni 1008
Number of MACs (local and remote) known for this VNI: 6
MAC Type Intf/Remote VTEP VLAN
44:38:39:00:6b:4c local vlan1008 1008
00:02:00:00:00:04 local hostbond5 1008
00:02:00:00:00:02 local hostbond4 1008
00:00:5e:00:01:01 local vlan1008-v0 1008
00:02:00:00:00:0c remote 27.0.0.15
00:02:00:00:00:0a remote 27.0.0.15
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
