Ticket: CM-14313
Reviewed By:
Testing Done: bgpmin, ospfmin, bgp_kitchen_sink_test
'ip route show' displays all routes as belonging to protocol zebra.
The user has to run an additional command (in vtysh) to get the actual
source of a route (bgp/ospf/static etc.). This patch addresses that by
pushing the appropriate protocol string into the protocol field of the
netlink route update message. Now you can see routes with the correct
origin as well as filter on them (ip route show proto ospf).
'ospf' is used for both IPv4 and IPv6 routes, even though the OSPF
version is different in both cases.
Sample output (old):
9.9.12.13 via 69.254.2.38 dev swp3.2 proto zebra metric 20
9.9.13.3 proto zebra metric 20
nexthop via 69.254.2.30 dev swp1.2 weight 1
nexthop via 69.254.2.34 dev swp2.2 weight 1
nexthop via 69.254.2.38 dev swp3.2 weight 1
Sample output (new):
9.9.12.13 via 69.254.2.38 dev swp3.2 proto bgp metric 20
9.9.13.3 proto bgp metric 20
nexthop via 69.254.2.30 dev swp1.2 weight 1
nexthop via 69.254.2.34 dev swp2.2 weight 1
nexthop via 69.254.2.38 dev swp3.2 weight 1
Problem reported that crash occurred when stopping quagga in certain
circumstances. Determined that this was due to a stale pointer on the
ifp for a deleted interface. The ifp->node had been freed but the ifp
still kept a pointer to it, and when later the process was stopped, it
attempted to delete it again.
Ticket: CM-15550
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Be a bit more rigoruous about what we can receive
from another protocol and attempt to make the code
less likely to crash and to just safely bail
out when an error is received.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We only create the v4 and v6 mpls fec tables currently.
Follow the code pattern for the rest of the code and
ensure that the table exists before we attempt to access it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The build system for mpls is a bit convoluted. We need
a way to handle builds across multiple platforms. This,
I believe addresses this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
flags is set but never used. Since we
plan to use it in the future, make
it evident what is going on here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements the handling of the BGP-Prefix-SID Label Index
attribute. When received from a peer and the index is acceptable, the local
label is picked up from the SRGB and is programmed as the incoming label as
well as advertised to peers. If the index is not acceptable, no local label
is assigned. The outgoing label will always be the one advertised by the
downstream neighbor.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements configuration of the global label block (SRGB) and
configuration of a label-index for a network in BGP.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Support install of labeled-unicast routes by a client. This would be
BGP, in order to install routes corresponding to AFI/SAFI 1/4 (IPv4)
or 2/4 (IPv6). Convert labeled-unicast routes into label forwarding
entries (i.e., transit LSPs) when there is a static label binding.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement interface that allows a client to register a FEC for obtaining
a label binding (in-label). Update client whenever the label binding is
updated and cleanup when client goes away.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement static label binding of a label to a prefix (FEC).
Note: Currently, only binding to a prefix is supported, the nexthop and/or
other parameters are not considered. This was cherry-picked by hand from
an earlier mpls branch.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The SNMP modules include <net-snmp/net-snmp-config.h>, which won't be
found in off-searchpath directories without SNMP_CFLAGS. Unfortunately
in my tests the files were on the search path even without the flags.
(SNMP_LIBS is not needed because only libfrrsnmp calls into net-snmp
functions.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This fixes a few problems like this one:
vtysh# show ipv6 route ospf6
Unknown route type
Also, replace SAFI_UNICAST with SAFI_MULTICAST in the "show ipv6 mroute
vrf all" command.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
lib -> Add a bit of documentation about what units we are in.
zebra -> Fix failure case to be a bit better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we get notification from the kernel about the creation
of a new interface, retrieve the speed of it from the kernel
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a prepatory commit for future improvements.
Add a change to the zapi to pass the interface speed up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
bzero() was deprecated in POSIX.1-2001 and removed in POSIX.1-2008 in
deference to memset().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Label Manager allows to share MPLS label space among different
daemons. Each daemon can request a chunk of consecutive labels and
release it if it doesn't need them anymore. Label Manager stores the
daemon protocol and instance to identify the owner client. It uses them
to perform garbage collection, releasing all label chunks from a client
when it gets disconnected or reconnected.
Additionally, every client can request that the chunk is never garbage
collected. In that case client has the responsibility to release
non-used labels.
Zebra can host the label manager itself (if no -l param is provided) or
connect to an external one using zserv/zclient (providing its address
with -l param).
Client code is in lib/zclient.c, but currently only LDP is using it.
TODO: Allow for custom ranges requests, i.e., specify the start label
besides the chunk.
TODO: Release labels from LDP.
Signed-off-by: Bingen Eguzkitza <bingen@voltanet.io>
