Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
* If the MSDP peer receives the SA from a non-RPF peer towards the
originating RP, it will drop the message.
* SA messages are forwarded away from the RP address only.
* SA messages are not forwarded within the mesh group.
* Preventing the MSDP connection from being dropped due to RPF check
failure (RFC3618, section 13 "MSDP Error Handling")
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
Signed-off-by: Adriano Reis <areis@barrukka.local>
This should never happen; no need to debug guard it and it's not a
warning, if this isn't working then NHT is not working at all.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Clean up the rare situation when bind fails to not
close the fd that was just opened and have the socket
leaked.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We use the pim mroute socket for kernel notifications of events.
Currently this is limited to 8 bits of data. There are patches
coming down the pike in kernel land to allow this to expand.
Rather than fix this and all the other places we assume MAXVIFS < 256
in the pim code right now. Leave a land mine for the developer
doing this work to point them in the right direction.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Match by exact address rather than by prefix match to
determine if we generated the IGMPP query. Othwerwise
we will be ignoring IGMP queries coming from other
hosts on the same subnet.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Reviewed-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
IGMP queries should contain the source address of the IGMP socket
they are being sent from.
Added binding the IGMP sockets to their specific source, otherwise
interfaces with multiple addresses will send multiple queries using
the same source, which is determined by the kernel.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Reviewed-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
IGMP packets received from a source that does not match the subnet
of any configured addresses on the receive interface should be
ignored.
Also, find and use the correct IGMP socket object for the received
IGMP packet.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Suppose you have more than 2 addresses on a pim interface:
lo up default 10.255.0.1/32
10.255.0.101/32
10.255.0.254/32
A `show ip pim int lo` gives us this:
eva# show ip pim interface lo
Interface : lo
State : up
Address : 10.255.0.1 (primary)
10.255.0.101/32
When we go look at the code that pulls secondary addresses in
we are using a prefix_cmp to know if we know about a secondary already
but were expecting true values instead of -1/0/1 being returned.
Modify code so that pim sees all secondary addresses
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
pimd crash at pim_msg_build_jp_groups (
grp=grp@entry=0x7ffca55b5d1e, sgs=sgs@entry=0x17821a0, size=20)
at pimd/pim_msg.c:198
Fix for https://github.com/FRRouting/frr/issues/6849
Root Cause:
===========
pimd has crashed because pim_upstream_rpf_clear function sets the
up->rpf.source_nexthop.interface pointer to NULL and has not removed
the upstream source node from the neighbor. When the upstream gets
deleted the source is not removed from neighbor
neigh->upstream_jp_agg->groups->sources list. This source node has
pointer to upstream freed memory. Hence when on_neighbor_jp_timer expires,
it tries to access the upstream pointer and crashed.
Fix:
====
Before setting the interface pointer to NULL, remove the node from
neigh->upstream_jp_agg->groups->sources list. Also the upstream state
has to be changed to Not joined.
Removed extra line changes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Move pim and igmp yang files registery to appropriate makefiles.
In yang directory makefile move under `PIMD`
Remove pimd yang files from library makefile instead move them
to pimd makefile.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
There are couple spots where group may be NULL and
when we output strings associated with it we should
ensure we are not doing something stupid.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When creating a pim instance, we were allocating table information
but never freeing it. Do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
This section of code was ported incorrectly and is causing
issues when running against some tests. Fix the missed
code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't crash when trying to `show running-config` because of missing
filter northbound integration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Issue: After SPT switchover, do shut and no-shut the received connected
interface, traffic stops.
R2
| |
+ +
Client-----R1--------R3----Source
R2 is RP.
Root cause:
Client is sending join for G and Source is sending traffic for G.
Before SPT switchover, traffic flows R3-R2-R1, after SPT switchover,
traffic flows R3-R1. Now Check in R2, there will be 2 ifchannel gets
created. first is (*, G) ifchannel which gets created because of (*, G)
join received from R1, second is (S, G) ifchannel which gets created
because of (s,g,rpt) prune received from R1
Shut the receiver connected interface on R1, R1 will send a (*, G) prune
towards RP (R2). On receiving (*, G) prune, R2 deletes the (*, G) ifchannel.
(s,g) ifchannel with flag (s,g,rpt) set will be timeout after the prune timer
expires. Before this timer expires, do noshut the received connected inrterface
on R1. R1 will send a (*,G) join to R2(RP), So oil will be updated in (*, G),
but wont get updated in (s,g) since the flag (s,g,rpt) is set. So traffic flow
stops.
Fix: When (*, G) ifchannel is getting deleted because of (*, G) prune
received, as (*,G) prune indicates that the router no longer wishes
to receive shared tree traffic, so clear (S,G,RPT) flag on all the child (S,G)
ifchannel, which was created because of (S,G,RPT) prune received
Signed-off-by: Sarita Patra <saritap@vmware.com>
Found some more missing code that got dropped during the
upstreaming process causing issues with things actually
working.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the mlag code was ported upstream the structure
of the calls in igmp_source_forward_start had been
reset and as a result we missed the call to check
that creating an ifchannel when we are DualActive
is allowed.
Ticket: CM-29941
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Description:
"show ip mroute" displays only installed(kernel) mroutes, where
as "show ip mroute json" diplays both installed and not installed
mroutes in the o/p.To make this consistant, diplaying only valid
routes in json o/p.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
Added json support for the following PIM commands.
1. show ip mroute [vrf NAME] count [json]
2. show ip mroute vrf all count [json]
3. show ip mroute [vrf NAME] summary [json]
4. show ip mroute vrf all summary [json]
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
We were using thread_cancel() directly instead of
THREAD_OFF which correctly ensures the pointer is not NULL.
Ticket:CM-29866
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Added a new show command "show ip multicast", display the multicast data
packet in and out on interface level.
Signed-off-by: Sarita Patra <saritap@vmware.com>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
