When Segment Routing is not enabled, some related output messages are
printed on the console especially when Segment Routing Debug is enabled.
This patch adds additional controls to check whether segment routing
is enabled or not.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
ospfNbrStateChange is generated when the state of neighbor regresses or
it progresses to a terminal state. When transitioning to or from Full
state on non-broadcast multi-access and broadcast networks the trap
should be sent by the designated router. This last condition was not
taken into account when checking for the conditions of generating the
trap.
Fixesvolta/volta-stack#1811
Signed-off-by: Babis Chalios <mail@bchalios.io>
Use to-string functions for GR message codes instead of raw
string array indexing; the values used can come in packets
and are not validated.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For TI-LFA, it is necessay to known the Adjacency SID advetise by the nieghbor
routers. However, the current Segment Routing code skip neighbor Adjacency SID
and thus, don't store them into the Segment Routing database.
This PR takes care of neighbor Adjacency SID by allowing to store them in the
Segment Routing database. Corresponding MPLS table entry is only configured if
the advertised Adjacency SID is global i.e. with L-Flag unset.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
If we enter:
int eth0
ip ospf area 0
ip ospf 10 area 0
!
This will crash ospf. Prevent this from happening.
OSPF instances:
a) Cannot be mixed with non-instance
b) Are their own process.
Since in multi-instance world ospf instances are their own process,
when an ospf processes receives an instance command we must remove
our config( if present ) and allow the new config to be active
in the new process. The problem here is that if you have not
done a `router ospf` above the lookup of the ospf pointer will
fail and we will just crash. Put some code in to prevent a crash
in this case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit fixes the following behavior:
```
nfware(config)# interface enp2s0
nfware(config-if)# ip ospf area 0
nfware(config-if)# no ip ospf area 0
% [ospfd]: command ignored as it targets an instance that is not running
```
We should be able to use the command without configuring the instance.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Instead of closing the socket, just note the failure and
continue on. If we actually failed here so many other
things would not be working at all, that actually
closing the fd won't matter.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With the following topology: r1---r2---r3, with r3 being the ASBR
announcing type 7 LSA:
r3 configuration
router ospf
redistribute static
network 10.0.23.0/24 area 1
area 1 nssa
!
We stop announcing prefix 3.3.3.3 in the ASBR
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)#
r2 (ABR)
r2# sh ip os database
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x8000002f 0x13be E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 7 0x8000002f 0x73c7 E2 3.3.3.3/32 [0x0] <-- refreshed(?)
With PR#7086 the LSA type 5 is flushed from the LSDB in r2 and the change is
announced to routers outside the area (r1)
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
r1# sh ip os da
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
Unfortunately I just realized that with PR#7086 I'm introducing a new bug, as Type-5 LSA
are not being refreshed when reaching MaxAge
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 35 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <--- refreshed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <--- not refreshed!
So this PR should fix the original issue and the bug introduced later, so when stopping
redistribution in the ASBR, both type 5 and type 7 are flushed:
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Routers outside the area are also notified
r1# sh ip os da
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Re-enabling redistribution, both LSA will be advertised again
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)# redistribute static
r3(config-router)#
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 19 0x80000001 0x6f90 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 11 0x80000001 0xcf99 E2 3.3.3.3/32 [0x0]
and they are refreshed when reaching MaxAge
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 10 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- Seq 2
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 2 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- Seq 2
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Description:
Added the following debug commands to enable debugs
GR helper functionality.
[no] debug ospf gr helper
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
The following show commands are added to display helper specific
information.
1.show ip ospf graceful-restart helper [detail] [json]
--> displays user configurations and list of all helpers details.
2.show ip ospf neighbour detail
--> diplays helper details
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
The follwoing helper exit scenarios are handled.
1. Recv Max age grace LSA from RESTARTER.
2. Grace timer expiry.
3. Due to topo change if lsa check is enabled.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
1. Skipping inactivity timer during graceful restart to make
the RESTARTER active even after dead timer expiry.
2. Handling HELPER on unplanned outages.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
1. Ospf dead-interval will be set as 4 times of hello-interval, incase
if it is not set by using "ip ospf dead-interval <dead-val>".
2. On resetting hello-interval using "no ip ospf hello-interval" the
dead interval and hello due will be changed accordingly.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
In a topology like R1 -- R2 -- R5, with R2 being NSSA ABR and R5 being
ASBR redistributing external routes, the ABR R2 will translate type-7
LSA into type-5 and advertise to the backbone. In the current implementation
R2 is also advertising a type-4 LSA when there is no need.
RFC 3101: "...NSSA's border routers never originate Type-4 summary-LSAs
for the NSSA's AS boundary routers, since Type-7 AS-external-LSAs are
never flooded beyond the NSSA's border..."
With this PR a type-4 LSA will not be advertised
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With this change the LSA type 5 is flushed from the LSDB and the
change is announced to routers outside the area
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
1. Fix for duplicating calls of ospf_external_lsa_refresh()
in ospf_distribute_list_update_timer().
2. Added the comment and change from PR 6981.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
