Use const with some args to ipaddr, zebra vxlan, mpls
lsp, and nexthop apis; add some extra checks to some
nexthop-related apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Readd the special MAC that represents the flood (head-end replication) entry
for EVPN-VxLAN upon getting a delete notification for it.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-25797
Ticket: CM-26238
Testing Done:
1. evpn-min, evpn-smoke - results summarized in CM-25798
It's been a year search and destroy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The existing behavior is when a remote VTEP is deleted,
its associatedneighbor (arp) and MAC entries are removed from
zebra database and do not wait for explicit type-2 route
withdraw from originating VTEP.
Remote type-2 route delete checks if VTEP is present before
removing the entry.
The behavior works fine when all evpn routes points to the
same nexthop as the VTEP IP.
In MLAG topology with advertise-pip, self type-2 and type-5 routes
are advertised with individual VTEP IP as nexthop ip for the route.
When a new VNI is created, it is assigned individual IP as tunnel-ip
then it transition to anycast IP (of the MLAG). During the transition,
type-3 route (VTEP delete) withdraw is sent for the individual IP.
The remote VTEP delete should not trigger to remove evpn routes pointing
to VTEP IP. Instead the route will be removed via explicit withdraw.
Ticket:CM-27752
Reviewed By:CCR-9722
Testing Done:
In evpn with MLAG deployment with advertise-pip and advertise-svi-ip
enabled, validated remote vtep delete does not remove self type-2 routes
from zebra DB. Upon explicit type-2 withdraw routes are removed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The decoding of _add and _del functions is practically identical
do a bit of work and make them so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
=================================================================
==13611==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffe9e5c8694 at pc 0x0000004d18ac bp 0x7ffe9e5c8330 sp 0x7ffe9e5c7ae0
WRITE of size 17 at 0x7ffe9e5c8694 thread T0
#0 0x4d18ab in __asan_memcpy (/usr/lib/frr/zebra+0x4d18ab)
#1 0x7f16f04bd97f in stream_get2 /home/qlyoung/frr/lib/stream.c:277:2
#2 0x6410ec in zebra_vxlan_remote_macip_del /home/qlyoung/frr/zebra/zebra_vxlan.c:7718:4
#3 0x68fa98 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#4 0x556add in main /home/qlyoung/frr/zebra/main.c:309:2
#5 0x7f16eea3bb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#6 0x431249 in _start (/usr/lib/frr/zebra+0x431249)
This decode is the result of a buffer overflow because we are
not checking ipa_len.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Macvlan down event have sentinel check of its parent
link presence.
Ticket:CM-26622
Reviewed By:CCR-9326
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
"show vrf vni" and "show evpn vni <l3vni>" commands
need to display correct router mac value.
"show evpn vni <l3vni>" detail l3vni needs to display
system mac as in PIP scenario value can be different.
Syste MAC would be derived from SVI interface MAC wherelse
Router MAC would be derived from macvlan interface MAC value.
Ticket:CM-26710
Reviewed By:CCR-9334
Testing Done:
TORC11# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Local Vtep Ip: 36.0.0.11
Vxlan-Intf: vx-4001
SVI-If: vlan4001
State: Up
VNI Filter: none
System MAC: 00:02:00:00:00:2e
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000
TORC11# show vrf vni
VRF VNI VxLAN IF L3-SVI State Rmac
vrf1 4001 vx-4001 vlan4001 Up 44:38:39:ff:ff:01
TORC11# show evpn vni 4001 json
{
"vni":4001,
"type":"L3",
"localVtepIp":"36.0.0.11",
"vxlanIntf":"vx-4001",
"sviIntf":"vlan4001",
"state":"Up",
"vrf":"vrf1",
"sysMac":"00:02:00:00:00:2e",
"routerMac":"44:38:39:ff:ff:01",
"vniFilter":"none",
"l2Vnis":[
1000,
]
}
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
macvlan interface up/down event triggers
bgp to send updates for evpn routes
with changed RMAC and nexthop IP values.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Extract mac-vlan interface mac when a l3vni add is sent to bgp
Per L3VNI maintain vrr interface.
An api to extract vrr mac address from a vlan id, associated
master svi device.
When a l3vni operational up event is sent to bgpd,
extract vrr rmac along with svi rmac.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
edge-2> show evpn vni detail json
{
"vni":79031,
"type":"L3",
...,
...
} <<<<<< no comma
{
"vni":79021,
"type":"L3",
...,
...
} <<<<<< no comma
{
} <<<<<< blank
edge-2>
The fix is to pack json info into json_array before printing it.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
In symmetric routing case for evpn (type-2/type-5)
routes, nexthop and Router mac fields can change from
the originating VTEP.
At the receiving VTEP, bgp path info may points to different
nexthop IP (nh1->nh2) and Remote MAC remain the same.
When the bgp sync the route with nexthop and RMAC fields.
For the exisitng rmac entry update/replace with the new
nexthop (VTEP) IP in remote rmac db in Zebra.
Similarly, bgp path info may points different Router-mac
(RMAC1->RMAC2) and the nexthop value remains the same.
In this case, update to the new RMAC value for the
existing remote nexthop in the Zebra' nexthop cache db.
Ticket:CM-26917
Reviewed By:CCR-9435
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The zvni_map_to_svi function may return NULL as such prevent
a deref and crash. Found via coverity
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a VxLAN interface comes up new vni up event is sent
to bgpd, which triggers bgpd to sync advertise-svi-macip
to zebra. At this point, vni is present but the associated
SVI may not be present.
When SVI comes up, vni add event sent to bgpd (with associated
vrf update). Bgpd already has vni present so
advertise-svi-macip is not synced to Zebra.
To fix,
When advertise-svi-macip flag is synced first time, cache it in
zebra context even though vni associated SVI is not present.
when SVI comes up, interface address add event triggers
new MAC-IP route add to bgpd.
Ticket:CM-26038
Reviewed By:CCR-9254
Testing Done:
Validated via running a sequence of steps in symmetric
routing topology.
- Enable advertise-svi-macip at l2vni level under bgp default
instance (afi/safi, l2vpn/evpn)
- Flap l2vni associated SVI interface.
- Check the output of 'show bgp l2vpn evpn route' command for
MAC-IP route of the SVI's (MAC and IP address).
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Some netlink-facing code used for evpn/vxlan programming was
being run in the dataplane pthread, but accessing zebra core
datastructs. Move some additional data into the dataplane
context, and use it in the netlink path instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move neighbor programming to the dataplane; remove
old apis; remove some ifdef'd use of direct netlink
code points, using neutral values outside of the netlink-
specific files.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
PR #3745 added EVPN feature to advertise individual
SVI-IPs as MAC-IP routes.
Fix a condition in zebra to send MAC and IP pair
to bgpd when the feature is enabled.
Testing Done:
Originator VTEP:
TORC11:~# ip -br addr show VxU-1002
VxU-1002 UP 45.0.2.2/24 2001:fee1:0:2::2/64
show bgp l2vpn evpn vni 1004
VNI: 1004 (known to the kernel)
Type: L2
Tenant-Vrf: default
RD: 27.0.0.11:3
Advertise-svi-macip : Yes
Import Route Target:
10:1004
Export Route Target:
10:1004
Remote vtep evpn route output for 45.0.4.2:
BGP routing table entry for 27.0.0.11:3:[2]:[0]:[48]:[00:02:00:00:00:2f]:[32]:[45.0.4.2]
Paths: (2 available, best #1)
Advertised to non peer-group peers:
MSP1(uplink-1) MSP2(uplink-2)
Route [2]:[0]:[48]:[00:02:00:00:00:2f]:[32]:[45.0.4.2] VNI 1004
64435 65546
36.0.0.11 from MSP1(uplink-1) (27.0.0.9)
Origin IGP, valid, external, bestpath-from-AS 64435, best (First path received)
Extended Community: RT:10:1004 ET:8
Last update: Thu Aug 8 18:09:13 2019
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Delete an auto MAC with no neighbor associated,
when its VNI is down.
In Following sequence stale MAC entry retained in
FRR (zebra).
- Local MAC-IP pair
- MAC is deleted in bridge fdb table
- VNI is down, triggers IP (neigh) entries removed
from FRR DB.
- MAC retained as AUTO MAC with neigh list count 0.
- When VNI is UP again, stale MAC entry retained in FRR
DB.
When the MAC-IP pair moves behind remote VTEP, local VTEP
fails to add remote entry as its MAC is in auto state.
Ticket:CM-25504
Reviewed By:
Testing Done:
Validated the sequence with fix and auto MAC is deleted
when VNI is down.
When VNI comes up, the remote MAC-IP is added to FRR (Zebra)
and kernel.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add info info in local mac del debug,
the local sequence and assoicated neigh count.
remote_mac_ip_add modify debug to display
flags value to cover local, remote and auto flags
for the MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
zvni setup in zebra is controlled via bgpd i.e. advertise_all_vni
from bgpd triggers this setup. As a part of zvni creation we may need
to setup BUM mcast SG entries which are propagated to pimd for MDT setup.
Now pimd may not be present at the time of zvni creation or may restart
post zvni creation so we need a mechanism to replay (on pimd startup) and
to cleanup (on pimd stop). This is addressed via zebra_vxlan_sg_replay and
zebra_evpn_pim_cfg_clean_up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
As part of PR 4458, when a client (bgpd) goes down,
zebra cleans up any evpn state including remotely learned
neighs, macs and vteps are suppose to be cleaned up,
uninstall from kernel tables.
Neighs (arps), macs and vteps (HREP entries) were not
removed from kernel tables as the uninstall flag as not set.
Clean up l3vni associated remote neighs, macs and vteps.
Ticket:CM-25468
Reviewed By:CCR-8889
Testing Done:
Validated in evpn symmetric routing topology where
remotely learned l2/l3 vnis neigh, macs and remote
vtep (hrep) entries are installed in kernel table,
perform systemctl stop frr.service and validated
all remotely learned entries cleaned up from kernel
tables.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Also fixes some issues related to -
show evpn arp-cache vni xx vtep yy
Ticket: CM-25380
Signed-off-by: Nitin Soni<nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8858
Testing-Done: Evpn scale test with 30K neighs
When BGP daemon is down, Clean up its configuration state from zebra.
When the BGP daemon is up again, it will push its configuration to zebra
Delete the MAC and neighbor information received on the BGP session,
while retaining the local MAC and local ARP entries.
Signed-off-by: Kishore Aramalla karamalla@vmware.com
