In the netlink code for determining whether to set
a src on the route, we check if the cmd=NEW_ROUTE
but its not possible for this to ever be anything
but a new route since we do a goto skip further up
if its a DEL_ROUTE cmd.
So remove this unnecessary check.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Determine src based on nexthop data even when we are using
kernel nexthop objects.
Before, we were entirely skipping this step and just sending the
nexthop ID, ignoring src determination.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Abstraction the route src determination from a nexthop in the
netlink code into a function for both singlepath and mutlipath
to call.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1) When programming a nhg id to the kernel we had no debug of that
is what we are doing.
2) Add debugs to all nexthop information to allow us to follow
which prefix we are talking about. This is especially
useful when dealing with a large number of routes and
you want to grep out one or two too see what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that any weight associated with the next hop is installed for
IPv4 routes with IPv6 next hops too.
Updates: lib, zebra: Allow for installation of a weighted nexthop
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The return type of is_selfroute function is changed from int to bool.
Also remove the redundant invoking of the is_selfroute function in the
calling function netlink_route_change_read_unicast
Fixes: https://github.com/FRRouting/frr/issues/5984
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Readd the special MAC that represents the flood (head-end replication) entry
for EVPN-VxLAN upon getting a delete notification for it.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-25797
Ticket: CM-26238
Testing Done:
1. evpn-min, evpn-smoke - results summarized in CM-25798
add debug trace in specific neigh request send api
to help debug an issue where synchronous response parse
returns with NLMSG_DONE where there is no ipv6 neigh received.
the count value is set to 1 because the request contained
a spcific neigh.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Nexthop groups as a whole do not make sense to have a vrf'ness
As that you can have a arbitrary number of nexthops that point
to separate vrf's.
Modify the code to make this distinction, by clearly delineating
the line between the nhg and the nexthop a bit better.
Nexthop groups having a vrf_id only make sense if you are using
network namespaces to represent them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a config that disables use of kernel-level nexthop ids.
Currently, zebra always uses nexthop ids if the kernel supports
them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
zebra can catch the kernel's route deletion by netlink.
but current FRR can't delete kernel-route on vrf(l3mdev)
when kernel operator delete the route on out-side of FRR.
It looks problem about kernel-route deletion.
This problem is caused around _nexthop_cmp_no_labels(nh1,nh2)
that checks the each nexthop's member 'vrf_id'.
And _nexthop_cmp_no_labels's caller doesn't set the vrf_id
of nexthop structure. This commit fix that case.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
We were not setting the RTNH_F_ONLINK flag where appropriate
when creating nexthop objects in the kernel.
Set it on the nhmsg.nh_flags netlink message.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Linux has the idea of allowing a weight to be sent
down as part of a nexthop group to allow the kernel
to weight particular nexthop paths a bit more or less
than others.
See:
http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multiple-links.html
Allow for installation into the kernel using the weight attribute
associated with the nexthop.
This code is foundational in that it just sets up the ability
to do this, we do not use it yet. Further commits will
allow for the pass through of this data from upper level protocols.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This reverts commit 7d5bb02b1a.
Allow zebra to actually maintain the nexthop group in the
linux kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix 2 Coverity issues:
1) zebra_nhg.c -> all paths in nhg_ctx_process_finish have
already deref'ed the ctx pointer no need for a test of it
2) the **ifp pointer passed in may be NULL. Prevent an accidental
deref if calling function does not pass in a ifp pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Checkpatch was complaining because this code was extending
beyond 80 characters on a couple lines. Adjusted a conditional
tree to fix that.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Guard against an overflow read when processing
nexthop groups from netlink. Add a check to ensure
we don't try to write passed the array size.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add code for handling nexthop group hash entry encaps
and sending them to the kernel. Add some more debugging
information for the encaps and groups in general.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
There was some code copypasta for mpls stack building in the
netlink install path. Reduced that to a common function.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we receive a route delete from the kernel and it
contains a nexthop object id, use that to match against
route gateways with instead of explicit nexthops.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Move the supports_nh bool indicating whether the kernel we are
using supports nexthop objects into the netlink kernel interface
itself. Since only linux and netlink support nexthop object APIs
for now this is fine.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add handling for delete/update nexthop object messages from the
kernel.
If someone deletes a nexthop object we are still using, send it back
down. If the someone updates a nexthop we are using, replace that nexthop
with ours. Routes are referencing this nexthop object ID and we resolved
it ourselves, so we should force the other `someone` to submit to our
will.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
On restart, if we failed to remove any nexthop objects due
to a kill -9 or such event, sweep them if we aren't using them.
Add a proto field to handle this and remove the is_kernel bool.
Add a dupicate flag that indicates this nexthop group is only
present in our ID hashtable. It is a dupicate nexthop we received
from the kernel, therefore we cannot hash on it.
Make the idcounter globally accessible so that kernel updates
increment it as soon as we receive them, not when we handle them.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Give all nhg_hash_entrys we install into the kernel
as nexthop objects a defined proto matching the zebra
rib table one. This makes sense since nhe's are proto-independent
and determined exclusively in zebra.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the ability to recursively resolve nexthop group hash entries
and resolve them when sending to the kernel.
When copying over nexthops into an NHE, copy resolved info as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were only setting and checking the ifindex if
the nexthop had an *_IFINDEX type. However, when nexthop
active checking is done, the non-*_IFINDEX types can also
obtain a nexthop with an ifindex and are thus valid too.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We will use a nhe context for dataplane interaction with
nextho group hash entries.
New nhe's from the kernel will be put into a group array
if they are a group and queued on the rib metaq to be processed
later.
New nhe's sent to the kernel will be set on the dataplane context
with approprate ID's in the group array if needed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Removing this function since the new paradigm
of everything just being nhg_connected structs
makes it not make a lot of sense.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Put the setting of the ifp on a nexthop group hash
entry into the zebra_nhg_alloc() function. It should
only be added if its not a group/recursive (it doesn't
have any depends) and its nexthop type has an ifindex.
This also provides functionality for proto-side ifp
setting.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
A nexthop group should not have a VRF ID. Only individual
nexthops need to be using a VRF. Fixed this both kernel and
proto side.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Re-organize and expose the nhg_connected functions so that
it can be used outside zebra_nhg.c. And then abstract those
into zebra_nhg_depends_* and zebra_nhg_depenents_* functons.
Switch the ifp struct to use an RB tree for its dependents,
making use of the nhg_connected functions.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Create a nhg_depenents tree that will function as a way
to get back pointers for NHE's depending on it.
Abstract the RB nodes into nhg_connected for both depends and
dependents. This same struct is used for both.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a helper function to allow us to check if two
nhg_hash_entry's dependency lists are equal.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
