When issuing a RTM_DELETE operation and the kernel tells
us that the route is already deleted, let's not complain
about the situation:
2022/03/19 02:40:34 ZEBRA: [EC 100663303] kernel_rtm: 2a10:cc42:1d51::/48: rtm_write() unexpectedly returned -4 for command RTM_DELETE
I can recreate this issue on freebsd by doing this:
a) create a route using sharpd
b) shutdown the nexthop's interface
c) remove the route using sharpd
This would also be true of pretty much any routing protocol's behavior.
Let's just not complain about the situation if a RTM_DELETE
operation is issued and FRR is told that the route does not
exist to delete.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since the `RB_INSERT()` is called after not found in RB tree, it MUST be ok and
and return zero. The check of returning value of `RB_INSERT()` is redundant,
just remove them.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Commit: 5d41413833 added 3 new dplane ops:
DPLANE_OP_INTF_INSTALL
DPLANE_OP_INTF_UPDATE
DPLANE_OP_INTF_DELETE
The build system does not build lua so zebra_script.c
was not updated. Update of course!
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When encoding a response to the upper level protocol the
prefixlen is not something that needs to be part of the
switch statement for handling of a prefix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently the nexthop tracking code is only sending to the requestor
what it was requested to match against. When the nexthop tracking
code was simplified to not need an import check and a nexthop check
in b8210849b8 for bgpd. It was not
noticed that a longer prefix could match but it would be seen
as a match because FRR was not sending up both the resolved
route prefix and the route FRR was asked to match against.
This code change causes the nexthop tracking code to pass
back up the matched requested route (so that the calling
protocol can figure out which one it is being told about )
as well as the actual prefix that was matched to.
Fixes: #10766
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since `zvni_map_to_svi_ns()` is used to find and return one specific interface
based on passed attributes of SVI, so the two parameters `in_param` and `p_ifp`
must not be NULL.
Passing NULL `p_ifp` makes no sense, so the check `if (p_ifp)` is
unnecessary.
So use `assert` to ensure the two parameters, and remove that unnecessary check.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Upon 'no advertise-all-vni', cleanup l2vni from
its tenant-vrf's l3vni list, instead of passed
zvrf->l3vni which will not be present in case
of default instance.
Reviewed By:
Testing Done:
Before Fix:
----------
TORC12(config-router-af)# advertise-all-vni
TORC12(config-router-af)# end
TORC12# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Vxlan-Intf: vni4001
State: Up
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 134217728 0 1000 1002 <-----
After Fix:
----------
TORC12# show evpn vni 4001
VNI: 4001
Type: L3
Tenant VRF: vrf1
Vxlan-Intf: vni4001
State: Up
Router MAC: 44:38:39:ff:ff:01
L2 VNIs: 1000 1002
Signed-off-by: Chirag Shah <chirag@nvidia.com>
RMAC keeping list of nexthops to keep track
of its existiance, remove the (old way) host prefix
mapping.
Ticket: #2798406
Reviewed By:
Testing Done:
TORS1# show evpn rmac vni 4001 mac 44:38:39:ff:ff:01
MAC: 44:38:39:ff:ff:01
Remote VTEP: 36.0.0.11
Refcount: 0
Prefixes:
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Keep the list of remote-vteps/nexthops in
rmac db.
Problem:
In CLAG deployment there might be a situation
where CLAG secondary sends individual ip as nexthop
along with anycast mac as RMAC. This combination
is updated in zebra's rmac cache.
Upon recovery at clag secondary sends withdrawal
of the incorrect rmac and nexthop mapping.
The RMAC entry mapping to nh is not cleaned up properly
in the zebra rmac cache.
Fix:
Zebra rmac db needs to maintain a list of nexthops.
When a bgp withdrawal for rmac to nexthop mapping
is received, remove the old nexthop from the rmac's nh
list and if the host reference still remains for
the RMAC,fall back to the nexthop one remaining in
the list.
At most you expect two nexthops mapped to RMAC
(in clag deployment).
Ticket: 2798406
Reviewed By:
Testing Done:
CLAG primary and secondary have advertise-pip enabled
advertise type-5 route (default route) with
individual IP as nh and individual svi mac as rmac.
- disable advertise pip on both clag devices, this
results in advertisement of routes with anycast ip as nh
and anycast mac as rmac.
- disable peerlink on clag primary, this triggers
clag secondary to (transitory) send bgp update with
individual ip as nh and anycast mac as rmac.
- At the remote vtep:
Check the zebra's rmac cache/nh mapping correctly
and points to anycast rmac and anycast ip as nh of the
clag system.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Cleanup the logs in the netlink code for setting
protodown on/off to be more useful to a user parsing them
after an issue.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Use the SET/UNSET/CHECK/COND macros for flag bifields
where appropriate throught the protodown code base.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Ensure we include the old reason when we are updating the reason
code for a evpn-mh bond member. Now that this is a common API
it could include things external to EVPN in this reason code
bitfield (ex: vrrp).
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Make the netlink protodown static function for checking
if the only bit set for protodown reason is FRR's more
easily readable to someone not familiar with the code.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Simplify the code for printing the reason codes via
show command. Just remove the trailing comma last
before printing.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Cleanup the logs in the api for setting protodown on/off
that zapi and others use. Make them more useful to a user parsing
them after an issue.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Avoid initialization in dplane_ctx_intf_init() so
the compiler can warn us about using unintialized data.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
When we are processing a bond member's protodown we get from
the dataplane, check to make sure we haven't already queued
up a set. If we have, it's likely this is just a notification
we get from the kernel after we set protodown and before we have
processed the result in our dplane pthread.
This change is needed now that we set protodown via the dplane
pthread.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
When setting the protodown reason use the update api
where we can directly update the entire reason bitfield
since we have to set more than one.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Extern the api for setting the protodown reason code
bitfield directly. Some places may want to completely update the
bitfield with more than one reason at a time.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Only clear protodown reason on shutdown/sweep, retain protodown
state.
This is to retain traditional and expected behavior with daemons
like vrrpd setting protodown. They expet it to be set on shutdown
and retained on bring up to prevent traffic from being dropped.
We must cleanup our reason code though to prevent us from blocking
others.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add functionality to clear any reason code set on shutdown
of zebra when we are freeing the interface, in case a bad
client didn't tell us to clear it when the shutdown.
Also, in case of a crash or failure to do the above, clear reason
on startup if it is set.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add enums for set/unset of prodown state to handle the mainthread
knowing an update is already queued without actually marking it
as complete.
This is to make the logic confirm a bit more with other parts of the code
where we queue dplane updates and not update our internal structs until
success callback is received.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add command for use to set protodown via frr.conf in
the case our default conflicts with another application
they are using.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add support for setting the protodown reason code.
829eb208e8
These patches handle all our netlink code for setting the reason.
For protodown reason we only set `frr` as the reason externally
but internally we have more descriptive reasoning available via
`show interface IFNAME`. The kernel only provides a bitwidth of 32
that all userspace programs have to share so this makes the most sense.
Since this is new functionality, it needs to be added to the dplane
pthread instead. So these patches, also move the protodown setting we
were doing before into the dplane pthread. For this, we abstract it a
bit more to make it a general interface LINK update dplane API. This
API can be expanded to support gernal link creation/updating when/if
someone ever adds that code.
We also move a more common entrypoint for evpn-mh and from zapi clients
like vrrpd. They both call common code now to set our internal flags
for protodown and protodown reason.
Also add debugging code for dumping netlink packets with
protodown/protodown_reason.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
