This would show only bsm related statistics for now.
We shall add more statistics to this later.
Sw3# show ip pim statistics
BSM Statistics :
----------------
Number of Received BSMs : 1584
Number of Forwared BSMs : 793
Number of Dropped BSMs : 1320
Interface : ens192
-------------------
Number of BSMs dropped due to config miss : 0
Number of unicast BSMs dropped : 0
Number of BSMs dropped due to invalid scope zone : 0
Interface : ens224
-------------------
Number of BSMs dropped due to config miss : 0
Number of unicast BSMs dropped : 0
Number of BSMs dropped due to invalid scope zone : 0
Interface : ens256
-------------------
Number of BSMs dropped due to config miss : 0
Number of unicast BSMs dropped : 0
Number of BSMs dropped due to invalid scope zone : 0
Signed-off-by: Saravanan K <saravanank@vmware.com>
This command shows all the fragments of the last received preferred BSM.
This displayed in readable format.
Sw3# sh ip pim bsm-database
Scope Zone: Global
Number of the fragments: 1
BSM Fragment : 1
------------------
BSR-Address BSR-Priority Hashmask-len Fragment-Tag
30.0.0.100 0 0 3289
Group : 225.1.1.1/32
-------------------
Rp Count:9
Fragment Rp Count : 9
RpAddress HoldTime Priority
20.0.0.2 150 0
2.2.2.2 150 0
9.9.9.10 150 0
7.7.2.7 150 0
7.2.2.7 150 0
7.7.9.7 150 0
7.8.9.10 150 0
7.5.2.7 150 0
9.10.9.10 150 0
Group : 226.1.1.1/32
-------------------
Rp Count:1
Fragment Rp Count : 1
RpAddress HoldTime Priority
9.9.9.9 150 0
Signed-off-by: Saravanan K <saravanank@vmware.com>
Command to display current bsr, last received bsm ts, bsr uptime
Sw3# sh ip pim bsr
PIMv2 Bootstrap information
Current preferred BSR address: 30.0.0.100
Priority Fragment-Tag State UpTime
0 6390 ACCEPT_PREFERRED 91:26:24
Last BSM seen: 00:00:37
Signed-off-by: Saravanan K <saravanank@vmware.com>
pim_rp_new split into pim_rp_new_config and pim_rp_new.
pim_rp_new_config is called by CLI.
pim_rp_new will be called by pim_rp_new_config and bsm rp config.
pim_rp_del is split into pim_rp_del_config and pim_rp_del
pim_rp_del_config is called by CLI.
pim_rp_del is called by pim_rp_del_config and bsm rp config
Signed-off-by: Saravanan K <saravanank@vmware.com>
(intf)ip pim bsm - to enable bsm processing on the interface
(intf)no ip pim bsm - to disable bsm processing on the interface
(intf)ip pim unicast-bsm - to enable ucast bsm processing on the interface
(intf)no ip pim unicast-bsm - to disable ucast bsm processing on the interface
Note: bsm processing and ucast bsm processing is enabled by default on a
pim interface. The CLI is implemented as a security feature as recommended by
RFC 5059
Signed-off-by: Saravanan K <saravanank@vmware.com>
There exists a possiblity that we have upstream data but
at this point in time the rpf failed because there is no
path. As such the rpf interface will be NULL and we
should not necessarily trust it. Prevent a crash
Ticket: CM-24857
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
the json code has not been updated since a variety of new flags have
been added to the code base. Add those flags in so we can tell
what is going on sometimes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to select on a S or G for a `show ip mroute`
command.
show ip mroute 225.1.1.111
show ip mroute 4.5.6.7 225.1.1.111
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The MLAG component on the switch is expected to provide some
properties (such as peerlink-rif) to bootstrap the anycast-VTEP
functionality. The final interface for this is being defined as
a part of the pim-mlag functionality.
This commit provides a hidden command to test the anycast-VTEP
functionality independent of the MLAG component.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Sample output:
root@TORS1:~# vtysh -c "show ip pim vxlan-groups"
Codes: I -> installed
Source Group Input Output Flags
27.0.0.7 239.1.1.101 lo I
* 239.1.1.100 - ipmr-lo I
* 239.1.1.101 - ipmr-lo I
27.0.0.7 239.1.1.100 lo I
root@TORS1:~#
root@TORS1:~# vtysh -c "show ip pim vxlan-work"
Codes: I -> installed
Source Group Input Flags
27.0.0.7 239.1.1.100 lo I
PS: note the worklist dump is a hidden command
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
ipmr-lo is a dummy netdev with no additional addressing requirements -
root@TORS1:~# ip -d link show ipmr-lo
28: ipmr-lo: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/ether 12:5a:ae:74:51:a2 brd ff:ff:ff:ff:ff:ff promiscuity 0
dummy addrgenmode eui64
root@TORS1:~#
This device is used by pim-vxlan to signify multicast-vxlan-tunnel
termination.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In an anycast VTEP setup the peerlink-rif (ISL) is added as a OIF to the
tunnel origination mroute. A new OIF protocol, VxLAN, has been added to
allow that functionalty.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a bit of code to allow us to look at specified S,G for
the upstream available to us.
If one item is listed we assume Group, if both we assume Source
then Group.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a bit of code to allow us to look at specified S,G for
the upstreams available to us.
If one item is listed we assume Group, if both we assume Source then
Group.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace cli 'debug static' with 'debug pim static', to make
the 'debug static' node available for staticd (eventually).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Start the separation of tracking a Destination from the act
of looking it up. The cojoining of these two concepts led
to a bunch of code that had to think about both problems leading
to weird situations and code paths. Simplify the code by making
pim_ecmp_nexthop_search a static function and we only ever
call pim_ecmp_nexthop_lookup when we need to do a RPF().
pim_ecmp_nexthop_lookup will now attempt to find a stored pnc
and if it finds one it will report on the answer from it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The current reverse logic led to this code construct
if (!pim_nexthop_lookup(...)) {
//Do something successfull
}
This is backwards and will cause logic errors when people
use this code. Fix to use true/false for success/failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: (*,G) mroute uptime is not updated in mroute table,
after deleting and adding the RP
Root cause: When RP gets deleted or becomes not reachable, then
we un-install the entry from the kernel, but still maintains the
entry in the stack. When RP gets re-configured or becomes reachable,
"show ip mroute" shows the uptime, when the channel_oil gets created.
Fix: Introduce a new time mroute_creation in the channel_oil, gets
updated when mroute gets installed in the kernel.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The interface column in pim was limited to 8 or 9 columns
all over the place in pim, fix the code up to allow interface
length to be up to 16 columns.
Ticket: CM-23083
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Suppose we have 2 routers A and B. Both Router A and B have
the same priority of 1000. Router A is the elected DR.
Now suppose B lowers his priority to 1. He still looses the
DR election and we are not sending a hello with the new priority.
Immediately after this A's priority is also lowered to 1, it
looses the election and sends the hello. B receives this hello
and elects A as the DR( since it has the better ip address)
At this point A believes B is the DR, and B believes A is the
DR until such time that the normal hello from B is sent to A,
which if timed correctly can be a significant amount of time).
This code just causes a hello to be sent if the priority is
changed. Now both sides will be able to converge quickly
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When FRR receives IGMP/PIM (*, G) join and RP is not configured or
not reachable, then we are creating a dummy upstream with incoming
interface as NULL.
Added some null checks for the incoming interface, while displaying
the pim upstream information in the cli command "show ip pim upstream".
Signed-off-by: Sarita Patra <saritap@vmware.com>
Add a test command to pim that allows you to reset the keepalive timer
for an upstream to it's max value. This is to allow purposeful testing
of cleanup code in pim, by forcing the keeaplive timer to expire later.
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:10 00:00:52 00:00:25 00:02:54 1
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:11 00:00:51 00:00:24 00:02:53 1
robot# test pim keep 192.168.201.136 225.1.0.0
Setting (192.168.201.136,225.1.0.0) to current keep alive time: 210
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:27 00:00:35 00:00:08 00:03:27 1
robot#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: Configure "ip pim rp x.x.x.x 225.0.0.0/4".
Show running config shows "ip pim rp x.x.x.x 224.0.0.0/4"
This is mis-leading.
Root-cause: Internally 225.0.0.0/4 is getting converted to
224.0.0.0/4 group mask, since the prefix length is 4.
Fix: Restrict the user to configure inconsistent group address
mask by throughing a cli error "Inconsistent address and mask".
Signed-off-by: Sarita Patra <saritap@vmware.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The tracking of who have drpriority on an interface
in pim was not displayed anywhere. Add to the show
command for future reference.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In pim_if_new use bool instead of an int to pass
true/false values for what we should create the
pim interface type for.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
