Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
(intf)ip pim bsm - to enable bsm processing on the interface
(intf)no ip pim bsm - to disable bsm processing on the interface
(intf)ip pim unicast-bsm - to enable ucast bsm processing on the interface
(intf)no ip pim unicast-bsm - to disable ucast bsm processing on the interface
Note: bsm processing and ucast bsm processing is enabled by default on a
pim interface. The CLI is implemented as a security feature as recommended by
RFC 5059
Signed-off-by: Saravanan K <saravanank@vmware.com>
The MLAG component on the switch is expected to provide some
properties (such as peerlink-rif) to bootstrap the anycast-VTEP
functionality. The final interface for this is being defined as
a part of the pim-mlag functionality.
This commit provides a hidden command to test the anycast-VTEP
functionality independent of the MLAG component.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
The definition of the interface commands in vtysh.c were outdated.
Currently, all daemons that call if_cmd_init() will have the "no interface
IFNAME" command and the "[no] description" commands as well, so there's
no need to define exceptions for these commands anymore.
To fix this, make extract.pl parse the if.c file so that vtysh can get the
interface commands from there automatically. Only the "interface IFNAME
[vrf NAME]" must be kept in vtysh.c because it changes the vty node and
thus needs special treatment.
Finally, make pimd and pbrd display interface descriptions on "sh run"
when they are configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If `ip igmp query-max-response-time` is set move it to
display first as that this command has order dependencies
on `ip igmp query-interval`.
Ticket: CM-21598
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Adds the ability to filter PIM Joins & IGMP reports on an interface.
Enabling a multicast boundary on an interface for a particular group
will prevent the interface from appearing in the group's OIL.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
pim is vrf aware and the interface based line for vrf's was
not being started with a vrf_frame as the non interface
based line was.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
All PIM Neighbors for a given pim interface is registered with
BFD.
Upon receiving BFD status down event, PIM Neighbor with BFD info is deleted.
Add pim bfd configuraiton (CLI) per interface, '[no] ip pim bfd'
Testing Done:
Configure BFD under PIM interface on all neighbor routers,
check bfd sessions up, remote end unconfigure BFD, results in BFD session down.
Previous state was UP to New state DOWN, results in PIM neighbor delete behind
that particular pim interface.
Pim-smoke Results:
Ran 94 tests in 7409.680s
FAILED (SKIP=8, failures=2)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ip pim ecmp and ip pim ecmp rebalance configuration CLIs were
not adding to Quagga.confg or running configuration.
Added both the configuration write in Config write handler.
Testing Done: Execute configuration cli and verified running config
and Quagga.conf file containing both configuration.
03# show running-config
Building configuration...
Current configuration:
!
ip multicast-routing
ip pim rp 6.0.0.9 230.0.0.0/16
ip pim join-prune-interval 61
ip pim ecmp
ip pim ecmp rebalance
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
To the 'ip pim spt-switchover infinity-and-beyond' command
add 'prefix-list <PLIST>'. To the command.
Use this as the basis to deny (Not immediate switchover)
or permit (Immediate switchover), based upon matching
the group address and the prefix-list.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code change adds the ability to specify that
we should be able to work with older versions
of PIM.
In future commits we will actually use this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Interface type has been replaced with the SSM range config. And SSM
groups can now co-exists with ASM groups. I have left the pim ssm
per-interface cli control hidden. It now enables pim-sm with a warning.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done: pim-smoke
SSM groups (232/8 or user configured SSM range) can exist in the same
multicast network as ASM groups. For such groups all RPT related state
machine operations have to be skipped as defined by section 4.8 of
RFC4601 -
1. Source registration is skipped for SSM groups. For SSM groups mroute
is setup on the FHR when a new multicast flow is rxed; however source
registration (i.e. pimreg join) is skipped. This will let the ASIC black
hole the traffic till a valid OIL is added to the mroute.
2. (*,G) IGMP registrations are ignored for SSM groups.
Sample output:
=============
fhr# sh ip pim group-type
SSM group range : 232.0.0.0/8
fhr# sh ip pim group-type 232.1.1.1
Group type: SSM
fhr# sh ip pim group-type 239.1.1.1
Group type: ASM
fhr#
Sample config:
=============
fhr(config)# ip pim ssm prefix-list ssm-ranges
fhr(config)#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15344
Testing Done:
1. SSM/ASM source-registration/igmp-joins.
2. On the fly multicast group type changes.
3. pim-smoke.
Automatically turn on pim if the daemon is turned on.
Hide the 'ip multicast-routing' command
Disable the 'no ip multicast-routing' command
Do not display the 'ip multicast-routing' command.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When issuing a vtysh -m command it expects the
output it receives to be the complete command
not a partial match.
The 'debug pim packets joins' command
was being outputted as 'debug pim packets join'
This was making quagga-reload.py unhappy. Adding
the joins word allows it to complete successfully
Ticket: CM-13805
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Make the 'ip igmp query-max-response-time' command
take input in deci-seconds and make the
'ip igmp query-max-response-time-dsec' command hidden.
Ticket:CM-13786
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Anycast rp requires multiple ip addresses on the lo. If PIM is used in
an unnumbered BGP network it picks one of the lo addresses as the
pim-primary for the swp interfaces. But if the anycast IP is picked up
by both sides pim nbr will never converge. So a static "use-source" config
is provided to allow the administrator to force the the hello source to the
unique IP address.
Sample output:
=============
dell-s6000-04(config-if)# do show running-config pimd
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
interface lo
ip pim sm
ip pim use-source 100.1.1.5
!
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
dell-s6000-04(config-if)# do show ip pim interface lo
Interface : lo
State : up
Use Source : 100.1.1.5
Address : 100.1.1.5 (primary)
100.1.1.100
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
dell-s6000-04(config-if)# do show ip pim interface lo json
{
"lo":{
"name":"lo",
"state":"up",
"address":"100.1.1.5",
"index":1,
"lanDelayEnabled":true,
"useSource":"100.1.1.5",
"secondaryAddressList":[
"100.1.1.100"
],
>>>>>> SNIPPED >>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add 'ip pim packets <1-100>' command.
Allows you to control the number of packets read in before
giving control back to another part of the process.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the 'ip pim register-suppress-time ...' command.
Remove the 'no ip pim rp keep-al...' command as
that the register suppress set that value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Add support for mesh-group based configuration that is easy to apply
via automation. The older per-peer configuartion is temporarily hidden
and will be cleaned up later.
Sample config -
ip msdp mesh-group cumulus source 100.1.1.4
ip msdp mesh-group cumulus member 100.1.1.5
ip msdp mesh-group cumulus member 100.1.1.6
2. Added support for detail peer and sa-cache displays. Along with
filter keys.
3. Add json output for all the msdp displays.
With this commit basic support for anycast-RP with MSDP (in numbered
network is complete). Unnumbered support will be added separately.
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit includes -
1. Maintaining SA cache with local and remote entries.
2. Local SA entries - there are two cases where we pick up these -
- We are RP and got a source-register from the FHR.
- We are RP and FHR and learnt a new directly connected source on a
DR interface.
3. Local entries are pushed to peers immediately on addition and
periodically. An immediate push is also done when peer session is
established.
4. Remote SA entries - from other peers in the mesh group and passed
peer-RPF checks.
5. Remote entries are aged out. No other way to del them
currently. In the future we may add a knob to flush entries on
peer-down.
Testing done -
Misc topologies with CL routers plus basic interop with another vendor (
we can process their SA updates and they ours).
Sample output -
root@rp:~# vtysh -c "show ip msdp sa"
Source Group RP Uptime
33.1.1.1 239.1.1.2 local 00:02:34
33.1.1.1 239.1.1.3 local 00:02:19
44.1.1.1 239.1.1.4 100.1.3.1 00:01:12
44.1.1.1 239.1.1.5 100.1.3.1 00:00:55
root@rp:~#
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a static igmp join is issued, before routing
has come up, the ability to recover was accidently
removed from the code.
Ticket: CM-13379
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit includes the following changes -
1. Support for MSDP peer DB (hash and sorted list).
2. Support for the following timers - keepalive, connect-retry, hold.
3. TCP session management (lower-ip is active, higher-ip is passive).
4. MSDP KA packet rx/tx.
5. Limited temporary config (will be replaced with the more automation
friendly RP-set).
Testing done -
Peer bringup/deletion (including interop with another vendor)
Sample out -
root@dell-s6000-04:~# sudo vtysh -c "show ip msdp peer"
Peer Local Mesh-group State Uptime
100.1.1.1 100.1.2.1 default established 00:07:27
100.1.3.1 100.1.2.1 default established 00:31:50
root@dell-s6000-04:~#
Coming soon -
1. part-2: SA cache management.
2. part-3: SPT setup using source in SA cache.
3. part-4: CLI cleanup.
Ticket: CM-13306
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
When there is allot of IGMP activity for the
kernel upcall that we are ignoring, just
ignore it for the moment as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Refactor the qpim_rp into pim_rp.c so that the global data
is protected. This will allow us to easily add the group
ranges.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some missing 'show debug pim' output so that I can
see what I think I'm debugging.
In general the pim debugs need another round of fixing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When displaying drpriority you can enter unsigned
integer values from 1-2^32. The display was
turning the unsigned value into a signed value
and thus we were displaying the wrong value.
Ticket: CM-13787
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
(cherry picked from commit db17265f1025e3ec578998ad537c33b49ed33cde)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The 'struct static_route' data structure duplicated a
decent bit of what is the in the struct channel_oil.
Refactor. This will set us up for further cleanup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you enter a static mroute under an interface
the 'show run' is not displaying this information.
Add code to allow this.
Ticket: CM-11257
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Allow the user to specify the static Rendevous point
as well as specifying that an interface is Sparse Mode.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to display igmp default values for the query-interval
and the query-max-response-time-dsec
Before change:
!
interface swp4
description swp4 -> host-212's swp1
ip igmp
ip igmp query-interval 125
ip igmp query-max-response-time-dsec 100
ip pim ssm
link-detect
!
After change:
!
interface br1
ip igmp
ip pim ssm
link-detect
!
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create new per interface command:
'ip pim hello <1-180> {<1-180>}'
The first number is the Hello Timer for this interface
The second number is the Hold Timer to pass to neighbors on this interface.
The second number is optional.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
From RFC 4601, Section 4.3.1:
The DR_Priority Option allows a network administrator to give
preference to a particular router in the DR election process by
giving it a numerically larger DR Priority. The DR_Priority Option
SHOULD be included in every Hello message, even if no DR Priority is
explicitly configured on that interface. This is necessary because
priority-based DR election is only enabled when all neighbors on an
interface advertise that they are capable of using the DR_Priority
Option. The default priority is 1.
This modification allows the setting of the DR Priority on a per
interface basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code in pimd needs to be updated to handle the changes
we've made to api's that it depends on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Welcome pimd to the Quagga daemon zoo!
This is a merge of commit 77ae369 ("pimd: Log ifindex found for an
interface when zebra lib reports a new connected address."), with
the intermediate "reconnect" changes removed (c9adf00...d274381).
d274381 is replaced with b162ab7, which includes some changes. In
addition, 4 reconnect-related changes and 1 cosmetic one have been
bumped out.
The rebase command used to produce the branch that is merged here is:
git rebase --onto b162ab7 c9adf00 77ae369
Note that 3 patches had their author rewritten from
"Anonymous SR#108542 <>" (which is not a valid git author ID)
to: "Savannah SR#108542 <nbahr@atcorp.com>" (which is the e-mail address
listed in the associated Savannah ticket)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
