The bgp configuration for the vxlan topotest mixed
and matched some configuration that does not belong
for an IBGP setup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
1. Added 2 new test cases to bgp-basic-functionality-topo1
2. Enhanced 2 tests to run for both static routes and network advvertise command
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 5 test cases to verify BGP AS-allow-in behavior in FRR
2. Enhanced framework to support BGP AS-allow-in config(lib/bgp.py)
3. Added API in bgp.py to verify BGP RIB table(lib/bgp.py)
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
If we're building with a separate build directory, these two build
targets can fail in case their output directory hasn't been created by
some other target that may or may not have run earlier.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add some basic tests to show that network and passive-interface
commands work with interface names in rip and ripngd.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a couple more tests to static route installation
Do some very very basic work to make sure that they are working
the way we want.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added 1 test case to verify NO-ADVERTISE Community functionality
2. Enhanced bgp.py to exclude routers from verification, if doesn't have bgp config
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 2 new test cases to bgp-basic-functionality-topo1
2. Enhanced 2 tests to run for both static routes and network advvertise command
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 5 test cases to verify BGP AS-allow-in behavior in FRR
2. Enhanced framework to support BGP AS-allow-in config(lib/bgp.py)
3. Added API in bgp.py to verify BGP RIB table(lib/bgp.py)
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
This test creates a 5 box setup with 2 hosts, 2 PEs and a P router
it checks for
1. VNI VTEPs being communicated between zebra from PE1 to PE2
and vice versa.
2. MAC addresses from host 1 being learned by PE1 and signalled
to PE2 over BGP
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Our two northbound tools don't have embedded YANG modules like the
other FRR binaries. As such, ly_ctx_set_module_imp_clb() shouldn't be
called when the YANG subsystem it being initialized by a northbound
tool. To make that possible, add a new "embedded_modules" parameter
to the yang_init() function to control whether libyang should look
for embedded modules or not.
With this fix, "gen_northbound_callbacks" and "gen_yang_deviations"
won't emit "YANG model X not embedded, trying external file"
warnings anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
We are still seeing cbit test failures in the ci system. I am
gonna try extending the timeout a bit more as that 8 seconds
doesn't seem to be long enough.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement tests to verify BGP link-bandwidth and weighted ECMP
functionality. These tests validate one of the primary use cases for
weighted ECMP (a.k.a. Unequal cost multipath) using BGP link-bandwidth:
https://tools.ietf.org/html/draft-mohanty-bess-ebgp-dmz
The included tests are:
Test #1: Test BGP link-bandwidth advertisement based on number of multipaths
Test #2: Test cumulative link-bandwidth propagation
Test #3: Test weighted ECMP - multipath with next hop weights
Test #4: Test weighted ECMP rebalancing upon change (link flap)
Test #5: Test weighted ECMP for a second anycast IP
Test #6: Test paths with and without link-bandwidth - receiver should resort to regular ECMP
Test #7: Test different options for processing link-bandwidth on the receiver
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Just a small hack to use printfrr() in tests, since otherwise the
redefined PRId64 trips some warnings.
Signed-off-by: David Lamparter <equinox@diac24.net>
Fixup this basically unused test to ensure that a RR server
passes the nexthop through correctly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The old version was creating a multi-line log message, which we can't
properly handle right now.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
"sort" as used in all-protocol-startup used sort which causes
different sort order based on locale settings. Specify the
correct one to make output matching our expected result
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
LDP now advertises routes it learns over an interface not configured
with LDP. If the route, which is learned over a non-LDP configured
interface, has no other NHs learned over an interface running LDP,
the router will act as a LDP egress router.
Modifying ldp-topo1/r1/ip_mpls_route.ref to include an extra newline.
Without this newline, the ldp-topo1 was failing.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
The bfd-bgp-cbit-topo3 test is testing bfd timers
with some timers that only wait 4 seconds. The CI
system is failing in various places due to bfd
not converging properly. Upon logging into a
CI system and running tests with intensive disk i/o
I was able to make the tests fail repeatedly in
a couple of different places. Add some additional
time to allow the system to converge on our CI
systems that are running in vm's and may not
always have complete control of cpu's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Used aggresive values to verify keepalive and holddown timers functionality
2. Modified variable name in lib/bgp.py
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
The update was performed using wuschl [1] like this:
$ wuschl rebuild tests/isisd/test_fuzz_isis_tlv
$ gzip -9 tests/isisd/test_fuzz_isis_tlv_tests.h
[1] https://pypi.org/project/wuschl/
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
1. Modified scripts to optimize execution time for route-map test suite
2. Removed unnecessary print statements from /lib/bgp.py
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Reduce rip topo1 run time from ~100 seconds down to ~45 seconds.
1) Reduce very very long sleeps
2) Modify rip timers to be more aggressive in sending data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_multiview_topo1 test had two issues
a) An abbundance of sleeps that are not necessary
b) The convergence time was too short.
The upshoot of this is that the test goes from 72 -> 33 seconds
run time on my machine.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
annie# show bgp ipv4 uni summ
BGP router identifier 192.168.201.136, local AS number 64539 vrf-id 0
BGP table version 22458946
RIB entries 1458006, using 178 MiB of memory
Peers 4, using 68 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
45.33.5.119 4 0 0 0 0 0 0 never Active
65.19.134.122 4 15096 4611832 108292 0 0 0 6d22h55m 800670
107.13.46.23 4 0 0 0 0 0 0 never Connect
robot(192.168.201.139) 4 64540 11159975 11365599 0 0 0 05w2d05h Connect
Total number of neighbors 4
On very busy systems The column output for MsgRcvd and MsgSent can quickly move past 7 columns.
Add a couple more to allow for even display.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a basic setup and test of evpn-pim.
Create a vxlan device ensure that pim notices this
and setups the appropriate groups and sends them
to the RP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit add behavior test for BGP Prefix-SID path
attribute generically. In this time, there are only
1-test for Prefix-SID type-1 Label-Index TLV.
There are 3 nodes r1(FRR), peer1(exabgp) and peer2(exabgp)
on this topotest. And it perform following:
* peer1 advertise Prefix-SID to r1
* r1 is received Prefix-SID from peer1
* bgpd on r1 check the path attribute and parse correctly.
* user can check information from type-1 information via show cli
* bgpd on r1 advertise Prefix-SID to peer2
* peer2 is received Prefix-SID from r1
* peer2 check the path attribute and parse correctly.
This test uses exabgp's generic path attribute feature
of exabgp is used to advertise Prefix-SID path attribute
to bgpd. generic path attribute feature enable exabgp
users to specify binary format path attribute.
we can send valious binary pattern
(but overflow test doesn't can be performed).
The reason why this commit uses generic attribute feature
is that exabgp v3 doesn't support Prefix-SID path attribute
and topotest support exabgp only v3. (fyr. exabgp v4 supports it).
Thus this test includes little complicated binary format,
so I wrote full binary desection and explanation.
If topotest support exabgp v4, this test should
be rewrite with non generic attribute feature.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
According to https://tools.ietf.org/html/rfc7606 some of the attributes
MUST be handled as "treat-as-withdraw" approach.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Install some kernel routes with different admin distances
ensuring that they are installed correctly and characterized
properly in the rib.
Then add a static route to override the kernel and then remove
it again to ensure that we account for it properly still.
Signed-off-by: Donald Sharp <sharpd@cumulusnetorks.com>
* Selection Deferral Timer for Graceful Restart.
* Added selection deferral timer handling function.
* Route marking as selection defer when update message is received.
* Staggered processing of routes which are pending best selection.
* Fix for multi-path test case.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Recent commit: 0eb97b860d
Broke onlink behavior and as a result ospf unnumbered failed
to work. This commit adds a small test to create 2 ospf routers,
connect them through ospf unlinked behavior and then ensure
that the routes are installed into the kernel as expected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add an additional router to the basic pim tests.
1) This test will add a link between r1 and a new rp
2) This test will ensure that r1 and rp have the expected
who is the rp.
3) This test will ensure that the rp has received the upstream
data for the multicast stream that is started.
Ostensibly commit
68a02e06e5 is the first bad commit
commit 68a02e06e5
Author: Mark Stapp <mjs@voltanet.io>
Date: Wed Nov 13 16:06:06 2019 -0500
*: revise zapi nexthop encoding
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Sparked this commit in that it broke nexthop reporting to upper
level protocols. Ensure that this expectation stays working
in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a very basic nexthop group functionality test.
This test creates a 2-way ecmp group and installs a route
with it using sharpd. Then we check to see that the nexthop
groups are marked valid/installed in zebra.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
