All userdata pointers need to be rekeyed to their new xpaths, not just
the one associated with the dnode being moved.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Recent rework of access lists to allow sequence numbers
accidently introduced the inability to delete some
access lists.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a zapi message type designed to carry opaque data. Add
'send' api, and prototype for client handler function. Also
add registration/unreg messages, so that clients can 'subscribe'
to receive these messages as they're passing through zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add utilities that init and deinit a stream_fifo - this lets us
use an on-stack fifo in some places, avoiding malloc'ing. Also
add const to some apis (no functional changes there).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Provide a way for the data plane to indicate pseudowire
status (such as: not forwarding, AC failure).
On a data plane pseudowire install failure, data plane
sets the pseudowire status.
Zebra relays the pseudowire status to LDP.
LDP includes the pseudowire status in the LDP notification
to the LDP peer.
Signed-off-by: Karen Schoener <karen@voltanet.io>
`debug zebra packet detail` dumps the full message whereas
it had been dropping exactly 10 bytes, the size of the zebra header
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Revise new `show pbr` keys to be consistent with existing
json in other daemons
target->nexthop
id->tableId (where relevant)
isValid->valid
isInstalled->installed
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Increased the verbosity of the json keys and flattened the returned
structure by removing superfluous keys.
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
in the CLI we state that the bandwidth of a link is
in Megabits per second, but when converting it to
Bytes per second for TE purposes we were treating
it as Kilobits. Fix the conversion error.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
the interface name was not present in the hook in charge of updating the
interface context to the registered hook service. For that, update the
name before informing it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the walk routine is used by vxlan service to identify some contexts in
each specific network namespace, when vrf netns backend is used. that
walk mechanism is extended with some additional paramters to the walk
routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when receiving a netlink API for an interface in a namespace, this
interface may come with LINK_NSID value, which means that the interface
has its link in an other namespace. Unfortunately, the link_nsid value
is self to that namespace, and there is a need to know what is its
associated nsid value from the default namespace point of view.
The information collected previously on each namespace, can then be
compared with that value to check if the link belongs to the default
namespace or not.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
to be able to retrieve the network namespace identifier for each
namespace, the ns id is stored in each ns context. For default
namespace, the netns id is the same as that value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
as remind, the netns identifiers are local to a namespace. that is to
say that for instance, a vrf <vrfx> will have a netns id value in one
netns, and have an other netns id value in one other netns.
There is a need for zebra daemon to collect some cross information, like
the LINK_NETNSID information from interfaces having link layer in an
other network namespace. For that, it is needed to have a global
overview instead of a relative overview per namespace.
The first brick of this change is an API that sticks to netlink API,
that uses NETNSA_TARGET_NSID. from a given vrf vrfX, and a new vrf
created vrfY, the API returns the value of nsID from vrfX, inside the
new vrf vrfY.
The brick also gets the ns id value of default namespace in each other
namespace. An additional value in ns.h is offered, that permits to
retrieve the default namespace context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With vrf-lite mechanisms, it is possible to create layer 3 vnis by
creating a bridge interface in default vr, by creating a vxlan interface
that is attached to that bridge interface, then by moving the vxlan
interface to the wished vrf.
With vrf-netns mechanism, it is slightly different since bridged
interfaces can not be separated in different network namespaces. To make
it work, the setup consists in :
- creating a vxlan interface on default vrf.
- move the vxlan interface to the wished vrf ( with an other netns)
- create a bridge interface in the wished vrf
- attach the vxlan interface to that bridged interface
from that point, if BGP is enabled to advertise vnis in default vrf,
then vxlan interfaces are discovered appropriately in other vrfs,
provided that the link interface still resides in the vrf where l2vpn is
advertised.
to import ipv4 entries from a separate vrf, into the l2vpn, the
configuration of vni in the dedicated vrf + the advertisement of ipv4
entries in bgp vrf will import the entries in the bgp l2vpn.
the modification consists in parsing the vxlan interfaces in all network
namespaces, where the link resides in the same network namespace as the
bgp core instance where bgp l2vpn is enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Synchronous GRPC services are called from arbitrary threads. This makes
access to anything outside the GRPC module unsafe. We need to convert
the plugin to use the async model that allows us to control our own
threads.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
start grpc thread with frr_pthread library
callbacks to integrate with rcu infrastructure.
If a thread is created using native pthread callbacks
and if zlog is used then it leads to crash.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Some CPP compilers don't support these designated initializers, since
we're just zero initializing don't need em
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Based on work originally by Mark Stapp <mjs@voltanet.io>.
Make it possible to iterate the typesafe lists in a const
context, as well as find items from them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
[above signoff was for the original version before modification]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is an implementation of the IS-IS SR draft [1] for FRR.
The following features are supported:
* IPv4 and IPv6 Prefix-SIDs;
* IPv4 and IPv6 Adj-SIDs and LAN-Adj-SIDs;
* Index and absolute labels;
* The no-php and explicit-null Prefix-SID flags;
* Full integration with the Label Manager.
Known limitations:
* No support for Anycast-SIDs;
* No support for the SID/Label Binding TLV (required for LDP interop).
* No support for persistent Adj-SIDs;
* No support for multiple SRGBs.
[1] draft-ietf-isis-segment-routing-extensions-25
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Parameters should be const whenever possible to improve code
readability and remove the need to cast away the constness of
const arguments.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
All custom "exit-*" commands that exit from a YANG-modeled
CLI node need to use cmd_exit() to ensure the CLI xpath index
(vty->xpath_index) will be updated accordingly.
Fixes#6316.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit d741915ecd.
This is because it breaks this behavior:
router ospf6
<commands>
!
int enp39s0
<more commands>
!
This is a very legal set of commands and completely destroys the
ability to do this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
