Initially the reading of the speed of an interface happened
upon interface creation and happened until the speed of a link
settled down to a single value. The speed of an interface
can also change as that a new optic can be inserted that
changes the speed, in which case FRR would see a interface
down (optic removal) and then a interface up (optic insertion).
In this case FRR would not treat this as an event that changed
the speed. Let's expand the checking a bit more.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
zebra is able to get information about gre tunnels.
zebra_gre file is created to handle hooks, but is not yet used.
also, debug zebra gre command is done to add gre traces.
A zebra_gre file is used for complementary actions that may be needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when zebra has vrf backend mapped to namespaces, the polling
of interfaces leads to fix all linkages of interfaces. This
was not done on non default namespace. do it for other namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
When an ES-bond comes out of bypass FRR needs to flush the local MACs learnt
while the bond was in bypass. To do that efficiently local MACs are linked
to the dest-access port. This only happens if the access-port is in
LACP-bypass or if it is non-ES.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Feature overview:
=================
A 802.3ad bond can be setup to allow lacp-bypass. This is done to enable
servers to pxe boot without a LACP license i.e. allows the bond to go oper
up (with a single link) without LACP converging.
If an ES-bond is oper-up in an "LACP-bypass" state MH treats it as a non-ES
bond. This involves the following special handling -
1. If the bond is in a bypass-state the associated ES is placed in a
bypass state.
2. If an ES is in a bypass state -
a. DF election is disabled (i.e. assumed DF)
b. SPH filter is not installed.
3. MACs learnt via the host bond are advertised with a zero ESI.
When the ES moves out of "bypass" the MACs are moved from a zero-ESI to
the correct non-zero id. This is treated as a local station move.
Implementation:
===============
When (a) an ES is detached from a hostbond or (b) an ES-bond goes into
LACP bypass zebra deletes all the local macs (with that ES as destination)
in the kernel and its local db. BGP re-sends any imported MAC-IP routes
that may exist with this ES destination as remote routes i.e. zebra can
end up programming a MAC that was perviously local as remote pointing
to a VTEP-ECMP group.
When an ES is attached to a hostbond or an ES-bond goes
LACP-up (out of bypss) zebra again deletes all the local macs in the
kernel and its local db. At this point BGP resends any imported MAC-IP
routes that may exist with this ES destination as sync routes i.e.
zebra can end up programming a MAC that was perviously remote
as local pointing to an access port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Added support for advertising SVI MAC if EVPN-MH is enabled.
In the case of EVPN MH arp replies from an attached server can be sent to
the ES-peer. To prevent flooding of the reply the SVI MAC needs to be
advertised by default.
Note:
advertise-svi-ip could have been used as an alternate way to advertise
SVI MAC. However that config cannot be turned on if SVI IPs are
re-used (which is done to avoid wasting IP addresses in a subnet).
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
protodown state is a combination of the dplane and zebra states.
protodown reason is maintained exclusively by zebra. Display this
information on two separate lines to make that ownership clearer.
Also display n/a for bonds as the dplane doesn't support protodowning
the bond device.
Sample output -
==============
root@torm-11:mgmt:~# vtysh -c "show interface hostbond1"|grep -i protodown
protodown: off (n/a)
protodown reasons: (uplinks-down)
root@torm-11:mgmt:~# vtysh -c "show interface swp5"|grep -i protodown
protodown: on
protodown reasons: (uplinks-down)
root@torm-11:mgmt:~#
PS: Cosmetic changes only, no functional change.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Local ethernet segments are held in a protodown or error-disabled state
if access to the VxLAN overlay is not ready -
1. When FRR comes up the local-ESs/access-port are kept protodown
for the startup-delay duration. During this time the underlay and
EVPN routes via it are expected to converge.
2. When all the uplinks/core-links attached to the underlay go down
the access-ports are similarly protodowned.
The ES-bond protodown state is propagated to each ES-bond member
and programmed in the dataplane/kernel (per-bond-member).
Configuring uplinks -
vtysh -c "conf t" vtysh -c "interface swp4" vtysh -c "evpn mh uplink"
Configuring startup delay -
vtysh -c "conf t" vtysh -c "evpn mh startup-delay 100"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
EVPN protodown display -
========================
root@torm-11:mgmt:~# vtysh -c "show evpn"
L2 VNIs: 10
L3 VNIs: 3
Advertise gateway mac-ip: No
Advertise svi mac-ip: No
Duplicate address detection: Disable
Detection max-moves 5, time 180
EVPN MH:
mac-holdtime: 60s, neigh-holdtime: 60s
startup-delay: 180s, start-delay-timer: 00:01:14 <<<<<<<<<<<<
uplink-cfg-cnt: 4, uplink-active-cnt: 4
protodown: startup-delay <<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ES-bond protodown display -
===========================
root@torm-11:mgmt:~# vtysh -c "show interface hostbond1"
Interface hostbond1 is up, line protocol is down
Link ups: 0 last: (never)
Link downs: 1 last: 2020/04/26 20:38:03.53
PTM status: disabled
vrf: default
OS Description: Local Node/s torm-11 and Ports swp5 <==> Remote Node/s hostd-11 and Ports swp1
index 58 metric 0 mtu 9152 speed 4294967295
flags: <UP,BROADCAST,MULTICAST>
Type: Ethernet
HWaddr: 00:02:00:00:00:35
Interface Type bond
Master interface: bridge
EVPN-MH: ES id 1 ES sysmac 00:00:00:00:01:11
protodown: off rc: startup-delay <<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ES-bond member protodown display -
==================================
root@torm-11:mgmt:~# vtysh -c "show interface swp5"
Interface swp5 is up, line protocol is down
Link ups: 0 last: (never)
Link downs: 3 last: 2020/04/26 20:38:03.52
PTM status: disabled
vrf: default
index 7 metric 0 mtu 9152 speed 10000
flags: <UP,BROADCAST,MULTICAST>
Type: Ethernet
HWaddr: 00:02:00:00:00:35
Interface Type Other
Master interface: hostbond1
protodown: on rc: startup-delay <<<<<<<<<<<<<<<<
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
the link information of vxlan interface is populated in layer 2
information, as well as in layer 2 vxlan information. This information
will be used later to collect vnis that are in other network namespaces,
but where bgp evpn is enabled on main network namespaces, and those vnis
have the link information in that namespace.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Reported by testing agency that rfc 4861 section 6.2.1 states
that all implementations must have a configuration knob to change
the setting of the advertised hop limit. This fix adds that
capability.
Ticket: CM-29200
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing agency that RFC4861 section 6.2.5
states that a router should send an RA with a lifetime of 0
before ceasing to send RAs on the interface, or when the interace
is shutdown, or the router is shutdown. This fix adds that capability.
Ticket: CM-27061
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported by testing facility that our sending of Router
Advertisements more frequently than once very three seconds is not
compliant with rfc4861. Added a knob to turn off fast retransmits
in order to meet the requirement of the RFC.
Ticket: CM-27063
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
macvlan interface up/down event triggers
bgp to send updates for evpn routes
with changed RMAC and nexthop IP values.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Re-work the validity setting and checking APIs
for nhg_hash_entry's to make them clearer.
Further, they were originally only beings set
on ifdown and install. Extended their use into
releasing entries and to account for setting
the validity of a recursive dependent.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Switch the nhg_connected tree structures to use the new
RB tree API in `lib/typerb.h`. We were using the openbsd-tree
implementation before.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add cli to show nhg_hash_entry's by ID.
Add cli to show nhg_hash_entry info for interfaces and remove
just listing ID's in `show interface *`
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We will use a nhe context for dataplane interaction with
nextho group hash entries.
New nhe's from the kernel will be put into a group array
if they are a group and queued on the rib metaq to be processed
later.
New nhe's sent to the kernel will be set on the dataplane context
with approprate ID's in the group array if needed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
