The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Otherwise if it is scheduled the thread pointer will be accessed after
the shutdown task finishes accessing, having deleted the structure that
owns said pointer, which causes a heap UAF.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The change consists in taking into account of the VRF identifier upon
which the ospf socket is created. Moreover, if the VRF is a netns
backend, then it is not necessary to perform the bind operations to vrf
device.
Also, when a VRF instance is enabled, it informs ospf VRF, and automatically
OSPF VRF benefits from it. Reversely, when VRF instance is disabled,
then OSPF VRF will be disabled too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf identifier in the ospf_vrf_enable routine is never read, then
does not need to be initialised.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When preforming CI test, CLI command 'no router ospf' followed by a
'router ospf' is performed to clean up the previous configuration.
Ospfd crash when configuring 'netwoark area'.
This is due to opsf_opaque_term() introduce in previous commit that cause this
crash. It remove not only Opaque LSA but also the list through the call to
'list_delete_and_null()' function. Same take place in 'ospf_mpls_te_term()',
'ospf_router_info_term()' and 'ospf_ext_term()' function.
New set of 'ospf_XXX_finish()' has been introduced to solve this issue while
keeping the possiblity to terminate properly the Opaque LSA and remove MPLS
LFIB entries set by Segment Routing.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Following various review, following files have been modfied:
- All: Change u_intXX_t typedef to standard uintXX_t types
- doc/OSPF-SR.rst: Update doc in particular the Linux Kernel configuration
section
- doc/ospfd.texi: Update CLI
- ospfd/ospf_dump.[c,h]: Add new 'debug ospf sr' when performing 'sh run'
- ospfd/ospf_ext.[c, h]: Various bug corrections notably to handle flooding of
Extended Prefix at startup. iFix TLVs size for LAN Adjacency.
Update Licence as per Community.md
- ospfd/ospf_opaque.c: Add proper termination function call to remove MPLS entries
- ospfd/ospf_ri.[c,h]: Bug corrections
- ospfd/ospf_sr.[c,h]: Various bug corrections, notably to determine the nexthop
SR Node. Add support to 'no-php-flag'.
Update Licence as per Community.md
- ospfd/ospfd.c: Add call to 'ospf_opaque_term()'
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Call Route-map, prefix-list clean up routines and
vrf clearnup during ospf daemon exit routine.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Issue 1652 was related to OSPF Crash on termination when ospf is
configured to flood self Opaque LSA e.g TE or RI Opaque LSA.
Analysis:
The problem resides in free_opaque_info_per_type() line 576 of
ospf_opaque.c. Once LSA flush, the function removes by calling
listnode_delete() function the opaque_info_per_type data structure.
However, this is also performed at the upper level function
ospf_opaque_type10lsa_term() which call list_delete_and_null() function.
This result into a double free pointer exception.
Solution:
Remove call to listnode_delete() calls in free_opaque_info_per_type()
function as it is done by list_delete_and_null(). Delete lines 592 - 615.
Remove also second call to ospf_opaque_type10lsa_term() in ospfd.c line 848.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Inform the .clang-format file about LSDB_LOOP and
put the proper indentation for this loop into the
code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Before
------
cel-redxp-10(config)# router ospf vrf RED
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0.0.0.0
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0.0.0.0
There is already same network statement.
cel-redxp-10(config-router)#
When we see the "There is already same network statement." message
vtysh exits non-zero. This scenario breaks frr-reload because
the command took and it in the config, it should exit zero here.
After
-----
cel-redxp-10(config)# router ospf vrf RED
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0.0.0.0
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0.0.0.0
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0.0.0.0
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0
cel-redxp-10(config-router)#
cel-redxp-10(config-router)# network 1.1.1.1/32 area 0.0.0.1
There is already same network statement.
cel-redxp-10(config-router)#
Currently, ospf external routers are part of struct
ospf_master which is not vrf aware ospf instance.
All ospf external routes are injected/leaked into all
vrfs.
Moved ospf external routes db to struct ospf to make
vrf aware, such one external routes learnt in one vrf
is not leaked into another vrf.
Ticket:CM-18855
Testing Done:
Inject external route in non-default vrf x, validated
ospf database across the vrf x, validated ospf routes
for vrf x.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Router-ID change or ospf instance going down,
send LS-Upd with MAXAGE to self origintated LSAs to
all ospf neighbors.
Ticket:CM-1576
Testing Done:
Bring R1 - R2, Change Router-ID on R2, restart frr on R2
Validated R1 ospf LSDB for max aged 3600 LSA from R2.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Ensure zebra received router-id isolated per vrf instance.
Store zebra received router-id within ospf instance.
Ticket:CM-18657
Reviewed By:
Testing Done:
Validated follwoing sequence
- Create vrf1111
- Create ospf vrf1111 with no router-id
- Assign ip to vrf111
- ospf is assigned zebra assigned router-id which is vrf ip.
- upon remvoing vrf ip, the router-id retained as same until
ospfd restarted.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
-Fix ordering of nssa command with translate options
and no-summary option.
Just like ospf stub no-summary keep the order order
of nssa no-summary.
- Fix NSSA options.
- Avoid displaying translate-candiate (default) option
in running-config.
cumulus(config-router)# area 2.2.2.2 nssa
<cr>
no-summary Do not inject inter-area routes into nssa
translate-always Configure NSSA-ABR to always translate
translate-candidate Configure NSSA-ABR for translate election (default)
translate-never Configure NSSA-ABR to never translate
Running-config output:
router ospf
area 2.2.2.2 nssa translate-always
area 2.2.2.2 nssa no-summary
Ticket:CM-8312
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
We have memory that is initialized upon ospf instance
and area startup. Free it up on shutdown.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove assert in path of router_id_update:
Upon configuring same router-id as neighbor's
assert would cause a crash. Log a warning message
and neighborship would not come up.
Address memory leaks
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Several changes were made from the original patch to resolve conflicts
and also to fix various issues that were discovered during testing. Below
is the original commit message minus a few parts that correspond to code
that was dropped during bug fixing.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
ospfd: Extend 'ip ospf area' to take address argument + rationalise ospf enable
* ospfd.c: (general) Clean up the whole running of OSPF on interfaces.
(add_ospf_interface) taking (struct interface *) arg is pointless here.
(ospf_is_ready) new helper.
(ospf_network_run_subnet) Put all the code for choosing whether to enable
OSPF on a subnet, and if so which area configuration to use, here. If a
subnet should not be enabled, ensure an existing oi is freed.
(ospf_network_run_interface) Just call run_subnet for all subnets on an
interface.
(ospf_network_run) Just call run_interface for all interfaces.
(ospf_if_update) Just call run_interface for the given interface.
(ospf_network_unset) Just call run_subnet for existing ois.
(ospf_update_interface_area) helper: update area on an oi, or create it.
(ospf_interface_set) renamed to ospf_interface_area_set for clarity.
Ensures OSPF is created, then into if_update.
(ospf_interface_unset) renamed to ospf_interface_area_unset and collapses
down to simple loop to call run_subnet for all ois.
* ospf_interface.h: add a more general OSPF_IF_PARAM_IS_SET, which does the
right thing and takes default config into account.
* doc/ospfd.texi: add 'ip ospf area' command.
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch has been part of Quagga since October 2015
Orignial Author: Paul Jakma <paul@quagga.net>
Date: Thu Aug 27 16:51:42 2009 +0100
Issue reported that a configuration commonly used on other routing implementations
fails in frr. If under ospf, "network 172.16.1.1/32 area 0" or under eigrp, "network
172.16.1.1/32" is entered, the appropriate interfaces are not included in the routing
protocol. This was because the code was calling prefix_match, which did not match if
the network statement had a longer mask than the interface being matched. This fix
takes away that restriction by creating a "lib/prefix_match_network_statement" function
which doesn't care about the mask of the interface. Manual testing shows both ospf and
eigrp now can be defined with more specific network statements.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If the user enters a decimal, display a decimal.
If the user enters a dotted quad, display a dotted quad.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
