The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_mark_updated has a `int del_later` variable
that is passed in but never used. Just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When evpn configured wiht route-map with vni which is not
configured. Upon receiving evpn routes (i.e Type-2, Type-3),
route-map match will be triggered. Since there is no l2vni
exists in db, some of the member fields in bgp_info (i.e.
dummy_info_extra) are passed uninitialized to evpn filter match cb.
This results in inaccessible memory causes crash.
Fix is to memset the bgp_info prior to passing to evpn filter cb.
In evpn vni filter cb, ensure to have NULL check for member filed
of the bgp_info.
memset bgp_info at few places where it is passed to route_match.
Ticket:CM-21335
Reviewed By:
Testing Done:
Configure route-map with not configured l2vni
Simulate to learn l2vpn type-2, 3 route
Restart frr.service with below config
address-family l2vpn evpn
neighbor fear route-map EVPN_VNI out
route-map EVPN_VNI deny 10
match evpn vni 140010
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
While the current implementation does pay attention to the AF
(inet/inet6) when comparing the IPv4/v6 address against an address-list
/ prefix-list inside a route-map, the AF check is being done rather
late, which leads to CPU cycles being wasted due to unnecessary list
lookups / address matching.
This commit checks the address family of a prefix right inside the
`route_match_ip(v6)_` functions before looking up any address- and/or
prefix-list, which should improve performance.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
EVPN prefix depends on the EVPN route type.
Currently, in FRR we have a prefix_evpn/evpn_addr which relates to a evpn prefix.
We need to convert this to encompass an union of various EVPN route-types.
This diff handles the necessary code changes to adopt the new struct evpn_addr.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
A Border Leaf can originate a default route
for all the leafs within the POD.
However, we do not want to advertise this route outside the POD.
Therefore, we provide an option
to filter a EVPN type5 default route through a route-map.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
FRR/CL provides the means for injecting regular (IPv4) routes
from the BGP RIB into EVPN as type-5 routes.
This needs to be enhanced to allow selective injection.
This can be achieved by adding a route-map option
for the "advertise ipv4/ipv6 unicast" command.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
In many situations, it is desirable to only exchange EVPN routes of a particular type.
For e.g., a common deployment scenario for large DCs
is to sub-divide the DC into multiple PODs with full host mobility within a POD
(i.e., all subnets provisioned on all leaf switches within the POD)
but only do prefix-based routing across PODs.
This can be achieved by only exchanging EVPN type-5 routes across PODs.
Implement a policy to filter EVPN routes based on route type.
Ticket: CM-19394
Review: CCR-7139
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Building a communities json object every time is
both expensive and memory wasteful. Modify
code to only build the json object when needed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The usage of XMALLOC for route_match_peer_compile causes
the pc->interface to be non-NULL. The code assumes that
pc->interface will be NULL.
Ticket: CM-18824
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are multiple places that we use route-maps in bgp
There is no need to limit the route-map 'match peer ...' command
to just import and export route-map types. I see need for
using this in table-maps as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If upon bgp startup we have this config:
router bgp 64540
neighbor 192.168.201.134 remote-as external
!
address-family ipv4 unicast
no neighbor 192.168.201.134 activate
neighbor 192.168.201.134 route-map NEXTHOP in
exit-address-family
The route-map map pointer for the incoming(or outgoing)
filter was not being saved due to a pre-mature optimization
of not handling the routemap callback if the peer is not
activated. The function that handles the peers route-maps
is making sure that the peer is in established state
before attempting to actually apply anything so just
call it to set the map pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
Add the RMAP_COMPILE_SUCCESS and switch over to using it.
Refactoring allows a removal of a if statement to just
use the switch statement already in place. Additionally
the reworking cleans up memory freeing in a couple of spots.
In one spot we no longer will leak memory too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This bgp-specific command had its positive form defined only in bgpd and
its negative form defined only in lib, which broke the whole rule for
other daemons.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There is no need for special casing of mac addresses,
since the mac address is it's own type integrated
into `struct prefix` now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. provision to add match clause with a vni under route-map
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
