This commit removes various parts of the bgpd implementation code which
are unused/useless, e.g. unused functions, unused variable
initializations, unused structs, ...
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
On the case where an ecom from FS redirect is received, the ecom may be
with the format A.B.C.D:E. On this case, the printable format of the
Flowspec redirect VRF ecom value may use more bytes in the buffer
dedicated for that. The buffer that stores the ecommunity is increased.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
On some cases, the ecommunity flowspec for redirect vrf is not displayed
in all cases. On top of that, display the values if ecom can no be
decoded.
Also, sub_type and type are changed from int to u_int8_t, because the
values contains match the type and sub type of extended communities.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The creation of a temporary string for the ecommunity
was being leaked when debugging is enabled. Write
a bit of code to prevent this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This utility routine in bgp ecommunity converts the flowspec actions
into a readable format in a policy routing action context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The usage of MTYPE_ECOMMUNITY for the free in ecommunity_del_val
caused the ref counts for the ecommunity to be incorrect.
Use MTYPE_ECOMMUNITY_VAL since that is what we are deleting.
Ticket: CM-20602
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The data type for a variable in bgp_ecommunity.c was
a non-standard type and was causing build failures
on some more obscure build targets.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fixes for route leaking between VRFs through BGP, especially for
the scenario where routes are leaked from a VRF X to multiple other VRFs.
This include making sure that import and export happen via the global VPN
table, setting RD correctly and proper handling for multiple import/export.
Ticket: CM-20256
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
This extended ecommunity is defined with
draft-ietf-idr-flowspec-redirect-ip-02 and is read from the BGP update
received.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
1. Added default gw extended community
2. code modification to handle sticky-mac/default-gw-mac as they go together
3. show command support for newly added extended community
4. State in zebra to reflect if a mac/neigh is default gateway
5. show command enhancement to refelect the same in zebra commands
Ticket: CM-17428
Review: CCR-6580
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When we are displaying a extended community ECOMMUNITY_SITE_ORIGIN
the display sprintf is this:
len = sprintf(
str_buf + str_pnt,
"EVPN:%02x:%02x:%02x:%02x:%02x:%02x",
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
The problem with this is that macaddr[0] is passed in as a integer
so the sprintf function thinks that the value to display is much
larger than it actually is. The ECOMMUNITY_STR_DEFAULT_LEN is 27
So the resulting string no-longer fits in memory and we write
off the end of the buffer and can crash. If we force the
passed in value to be a uint8_t then we get the expected output
since a single byte is displayed as 2 hex characters and the
resulting string fits in str_buf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Add hash names to all hash_create calls
2) Fix community_hash, ecommunity_hash and lcommunity_hash key
creation
3) Fix output of community and lcommunity iterators( why would
we want to see the memory location of the backet? ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Define helper functions to form different kinds of route targets. Also,
refine functions that encode extended communities as well as generate
a string from an extended community.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In the case where extended communities to str function is called with a
filtering mecanism, then the case that the returned buffer is not inited
may happen. Hence the change done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For each received routermac extended community, the mac address is
copied into routermac extended community context. For each emission,
a check is done against routermac extended community, if L2VPN is
enabled. If enabled, the extended community is appended.
Signed-off-by: Philippe Gubiert <philippe.guibert@6wind.com>
As per draft-ietf-bess-evpn-inter-subnet-forwarding-01, chapter 6.1,
a new extended community called router's MAC Extended Community is
provided. This community is appended to extended community list.
Note that a show API has been changed in order to be able to not
display (or not) this new type.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This fix permits processing of default gateway extended
community if present. This option, if router mac option is not
present, will replace it.
Also, when exporting route entry to VRF RIB, if VRF is layer 2
type, then the ecommunity related to mac address and router mac
are stripped.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
BGP Large Communities are a novel way to signal information between
networks. An example of a Large Community is: "2914:65400:38016". Large
BGP Communities are composed of three 4-byte integers, separated by a
colon. This is easy to remember and accommodates advanced routing
policies in relation to 4-Byte ASNs.
This feature was developed by:
Keyur Patel <keyur@arrcus.com> (Arrcus, Inc.),
Job Snijders <job@ntt.net> (NTT Communications),
David Lamparter <equinox@opensourcerouting.org>
and Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Job Snijders <job@ntt.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
Negative value in output of ecommunities (and as numbers)
seems odd :-). This patch fixes it. And add minor formating
modification, better for big as numbers.
Signed-off-by: Milan Kocian <milon@wq.cz>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit cb4fc59c8a0f9df81109d38acbeaab5627e361f5)
Conflicts:
bgpd/bgp_vty.c
This pulls up ecommunity_token_unknown to be the first enum value (at
0), and uses that as initialiser to get rid of the uninitialised use
warning.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit b1672ce858cc9c16fd7cc67b673aa241d9583a59)
This patch implements the 'update-groups' functionality in BGP. This is a
function that can significantly improve BGP performance for Update generation
and resultant network convergence. BGP Updates are formed for "groups" of
peers and then replicated and sent out to each peer rather than being formed
for each peer. Thus major BGP operations related to outbound policy
application, adj-out maintenance and actual Update packet formation
are optimized.
BGP update-groups dynamically groups peers together based on configuration
as well as run-time criteria. Thus, it is more flexible than update-formation
based on peer-groups, which relies on operator configuration.
[Note that peer-group based update formation has been introduced into BGP by
Cumulus but is currently intended only for specific releases.]
From 11098af65b2b8f9535484703e7f40330a71cbae4 Mon Sep 17 00:00:00 2001
Subject: [PATCH] updgrp commits
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This change reduces loop count. Less jumps.
* bgp_community.c: One loop per community.
* bgp_ecommunity.c: One loop per ecommunity.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This vulnerability (CERT-FI #513254) was reported by CROSS project.
They have also suggested a fix to the problem, which was found
acceptable.
The problem occurs when bgpd receives an UPDATE message containing
255 unknown AS_PATH attributes in Path Attribute Extended Communities.
This causes a buffer overlow in bgpd.
* bgp_ecommunity.c
* ecommunity_ecom2str(): perform size check earlier
advertised is based on the bestpath attribute set, but the
following attributes are aggregated from the attribute sets
of the multipath constituents:
- AS_PATH
- ORIGIN
- COMMUNITIES
- EXTENDED COMMUNITIES
In addition the route is advertised with the NEXT_HOP set
to the router's interface IP address, instead of the NEXT_HOP
of the best path. This is to ensure that traffic will go to this
router so it can be fanned out via the multipath route.
* bgpd/ecommunity.c
* ecommunity_uniq_sort(): Make this function externally accessible
* bgpd/ecommunity.h
* Add external declaration for ecommunity_uniq_sort()
* bgpd/bgp_mpath.c
* bgp_info_nexthop_cmp(): Replace calls to bgp_attr_extra_get()
to avoid unwanted memory allocation
* bgp_info_mpath_free(): Free aggregate attribute for multipath
* bgp_info_mpath_attr(): Lookup aggregate attribute of a multipath route
* bgp_info_mpath_attr_set(): Set aggregate attribute of a multipath route
* bgp_info_mpath_aggregate_update(): Update the aggregate attribute
of a multipath route
* bgpd/bgp_mpath.h
* bgp_info_mpath: Add pointer to hold aggregate attribute of a multipath
* Add external declarations for new functions
* bgpd/bgp_route.c
* bgp_announce_check(): Use aggregate attribute when announcing multipath
route
* bgp_announce_check_rsclient(): Use aggregate attribute when announcing
multipath route
* bgp_best_selection(): After updating multipath set, update the
multipath aggregate attribute
* Extended communities has some kind of resource allocation problem which
causes a double-free if the 'set extcommunity ...' command is used.
Try fix by properly interning extcommunities.
Also, more generally, make unintern functions take a double pointer
so they can NULL out callers references - a usefully defensive programming
pattern for functions which make refs invalid.
Sadly, this patch doesn't fix the problem entirely - crashes still
occur on session clear.
* bgp_ecommunity.h: (ecommunity_{free,unintern}) take double pointer
args.
* bgp_community.h: (community_unintern) ditto
* bgp_attr.h: (bgp_attr_intern) ditto
* bgp_aspath.h: (bgp_aspath.h) ditto
* (general) update all callers of above
* bgp_routemap.c: (route_set_ecommunity_{rt,soo}) intern the new extcom added
to the attr, and unintern any old one.
(route_set_ecommunity_{rt,soo}_compile) intern the extcom to be used
for the route-map set.
(route_set_ecommunity_*_free) unintern to match, instead of free
(route_set_ecommunity_soo) Do as _rt does and don't just leak
any pre-existing community, add to it (is additive right though?)
I've spent the last several weeks working on stability fixes to bgpd.
These patches fix all of the numerous crashes, assertion failures, memory
leaks and memory stomping I could find. Valgrind was used extensively.
Added new function bgp_exit() to help catch problems. If "debug bgp" is
configured and bgpd exits with status of 0, statistics on remaining
lib/memory.c allocations are printed to stderr. It is my hope that other
developers will use this to stay on top of memory issues.
Example questionable exit:
bgpd: memstats: Current memory utilization in module LIB:
bgpd: memstats: Link List : 6
bgpd: memstats: Link Node : 5
bgpd: memstats: Hash : 8
bgpd: memstats: Hash Bucket : 2
bgpd: memstats: Hash Index : 8
bgpd: memstats: Work queue : 3
bgpd: memstats: Work queue item : 2
bgpd: memstats: Work queue name string : 3
bgpd: memstats: Current memory utilization in module BGP:
bgpd: memstats: BGP instance : 1
bgpd: memstats: BGP peer : 1
bgpd: memstats: BGP peer hostname : 1
bgpd: memstats: BGP attribute : 1
bgpd: memstats: BGP extra attributes : 1
bgpd: memstats: BGP aspath : 1
bgpd: memstats: BGP aspath str : 1
bgpd: memstats: BGP table : 24
bgpd: memstats: BGP node : 1
bgpd: memstats: BGP route : 1
bgpd: memstats: BGP synchronise : 8
bgpd: memstats: BGP Process queue : 1
bgpd: memstats: BGP node clear queue : 1
bgpd: memstats: NOTE: If configuration exists, utilization may be expected.
Example clean exit:
bgpd: memstats: No remaining tracked memory utilization.
This patch fixes bug #397: "Invalid free in bgp_announce_check()".
This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c:
bgp_clear_route_node()".
My apologies for not separating out these changes into individual patches.
The complexity of doing so boggled what is left of my brain. I hope this
is all still useful to the community.
This code has been production tested, in non-route-server-client mode, on
a linux 32-bit box and a 64-bit box.
Release/reset functions, used by bgp_exit(), added to:
bgpd/bgp_attr.c,h
bgpd/bgp_community.c,h
bgpd/bgp_dump.c,h
bgpd/bgp_ecommunity.c,h
bgpd/bgp_filter.c,h
bgpd/bgp_nexthop.c,h
bgpd/bgp_route.c,h
lib/routemap.c,h
File by file analysis:
* bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released.
* bgpd/bgp_attr.c: #if removed uncalled cluster_dup().
* bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from
bgp_exit().
* bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and
also fix memory leak.
* bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees
allocations made as part of bgpd initialization and, to some extent,
configuration. If "debug bgp" is configured, memory stats are printed
as described above.
* bgpd/bgp_nexthop.c: zclient_new() already allocates stream for
ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so
zlookup is global so bgp_exit() can use it.
* bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route()
adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag.
* bgpd/bgp_route.h: Correct reference counter "lock" to be signed.
bgp_clear_route() now accepts a bgp_clear_route_type of either
BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT.
* bgpd/bgp_route.c:
- bgp_process_rsclient(): attr was being zero'ed and then
bgp_attr_extra_free() was being called with it, even though it was
never filled with valid data.
- bgp_process_rsclient(): Make sure rsclient->group is not NULL before
use.
- bgp_processq_del(): Add call to bgp_table_unlock().
- bgp_process(): Add call to bgp_table_lock().
- bgp_update_rsclient(): memset clearing of new_attr not needed since
declarationw with "= { 0 }" does it. memset was already commented
out.
- bgp_update_rsclient(): Fix screwed up misleading indentation.
- bgp_withdraw_rsclient(): Fix screwed up misleading indentation.
- bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also
free struct bgp_clear_node_queue used for work item.
- bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in
case peer is released by peer_unlock() call.
- bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use
struct bgp_clear_node_queue to supply data to worker. Add call to
bgp_table_lock().
- bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or
BGP_CLEAR_ROUTE_MY_RSCLIENT.
- bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL.
Bug 397 fixes:
- bgp_default_originate()
- bgp_announce_table()
* bgpd/bgp_table.h:
- struct bgp_table: Added reference count. Changed type of owner to be
"struct peer *" rather than "void *".
- struct bgp_node: Correct reference counter "lock" to be signed.
* bgpd/bgp_table.c:
- Added bgp_table reference counting.
- bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if
set.
- bgp_unlock_node(): Added assertion.
- bgp_node_get(): Added call to bgp_lock_node() to code path that it was
missing from.
* bgpd/bgp_vty.c:
- peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment
to owner. Handle failure gracefully.
- peer_rsclient_unset_vty(): Add call to bgp_clear_route() with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
* bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it.
* bgpd/bgpd.c:
- peer_lock(): Allow to be called when status is "Deleted".
- peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to
bgp_clear_route() call.
- peer_delete(): Common variable listnode pn. Fix bug in which rsclient
was only dealt with if not part of a peer group. Call
bgp_clear_route() for rsclient, if appropriate, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host.
- peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with
BGP_CLEAR_ROUTE_MY_RSCLIENT purpose.
- bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host.
- bgp_delete(): Delete peers before groups, rather than after. And then
rather than deleting rsclients, verify that there are none at this
point.
- bgp_unlock(): Add assertion.
- bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself.
* lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed
massive leak in install_element() in which cmd_make_descvec() was being
called more than once for the same cmd->strvec/string/doc.
* lib/log.c: Make closezlog() check fp before calling fclose().
* lib/memory.c: Catch when alloc count goes negative by using signed
counts. Correct #endif comment. Add log_memstats_stderr().
* lib/memory.h: Add log_memstats_stderr().
* lib/thread.c: thread->funcname was being accessed in thread_call() after
it had been freed. Rearranged things so that thread_call() frees
funcname. Also made it so thread_master_free() cleans up cpu_record.
* lib/vty.c,h: Use global command_cr. Add vty_terminate().
* lib/zclient.c,h: Re-enable zclient_free().
