The labeled unicast and unicast tables have been combined
into the unicast table. Additionally we have a restriction
where if you configure labeled unicast you cannot configure
unicast. This created a bug with 'show bgp ipv4 labeled-unicast summ'
command where we were displaying NoNeg, because v4 has been intentionally
turned off.
Modify the code so that when we are looking up if we have negotiated
a capapbility we use the correct one, while still using the appropriate
table for prefix count.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command needs to be deprecated. It partially implements
a refusal to create multiple instances. If you do not need
multiple instances, just don't create them in the cli instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command needs to be deprecated. It sets a small variety
of options via the BGP_OPT_CONFIG_CISCO flag. Set for removal
in 1 year.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes all outstanding style/formatting issues as detected by
'git clang-format' or 'checkpath' for the new peer-group override
implementation, which spanned across several commits.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit fixes peer-group overrides for inverted AF flags. This
implementation is currently only being used by the three 'send-community'
flags. Commit 70ee29b4d introduced generic support for overriding AF
flags, but did not support inverted flags.
By introducing an additional array on the BGP peer structure called
'af_flags_invert' all current and future flags which should work in an
inverted way can now also be properly overridden.
The CLI commands will work exactly the same way as before, just that 'no
<command>' now sets the flag and override whereas '<command>' will unset
the flag and remove the override.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Problem reported due to tab completion showing all possible peers
in every vrf, but when neighbor in wrong vrf entered "no such
neighbor" is the error message. Making it slightly more clear
with "no such neighbor in the view/vrf" to clue the user that they
may have specified the wrong vrf.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This commit moves the command 'bgp enforce-first-as' from global BGP
instance configuration to peer/neighbor configuration, which can now be
changed by executing '[no] neighbor <neighbor> enforce-first-as'.
End users can now enforce sane first-AS checking on regular sessions
while e.g. disabling the checks on routeserver sessions, which usually
strip away their own AS number from the path.
To ensure backwards-compatibility, a migration routine was added which
automatically sets the 'enforce-first-as' flag on all configured
neighbors if the old global setting was activated. The old global
command immediately disappears after running the migration routine once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation does not respect the AFI+SAFI combination of
a peer when executing a non-soft (hard) clear. An example would be the
command `clear bgp ipv4 unicast *`, which will clear all BGP peers, even
those that do not have IPv4-Unicast activated.
This commit fixes that behavior by applying the same rules to both soft
and hard clear commands, so that peers without a matching AFI+SAFI
combination will be no longer modified.
Additionally, this commit adds warning messages to all `clear bgp
[<afi>] [<safi>] <target>` commands when no matching peers with the given
AFI+SAFI combination could be found.
Both existing and new warning messages have been extended to also
mention the AFI+SAFI combination that is missing, which is more helpful
to the user than a generic expression 'No peer configured'.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of building JSON output is greatly different
for large communities compared to standard communities. This is mainly
noticeable by the missing 'list' attribute, which usually offers an
array of all communities present on a BGP route.
This commit adds the missing functionality of properly returning a
'list' attribute in JSON output and also tries a similar approach like
the standard communities are using to implement this feature.
Additionally, the 'format' specifier has been completely removed from
large communities string/JSON rendering, as the official RFC8092 specifies that
there is only one canonical representation:
> The canonical representation of BGP Large Communities is three
> separate unsigned integers in decimal notation in the following
> order: Global Administrator, Local Data 1, Local Data 2. Numbers
> MUST NOT contain leading zeros; a zero value MUST be represented with
> a single zero. Each number is separated from the next by a single
> colon. For example: 64496:4294967295:2, 64496:0:0.
As the 'format' specifier has not been used/checked and only one
canonical representation exists per today, there was no reason to keep
the 'format' parameter in the function signature.
Last but not least, the struct attribute 'community_entry.config' is no
longer being used for large communities and instead 'lcommunity_str' is
being called to maintain a similar approach to standard communities.
As a side effect, this also fixed a memory leak inside 'community_entry_free'
which did not free the allocated memory for the 'config' attribute when
dealing with a large community.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Before this fix, both real neighbors and peer-groups were lumped
together in auto-completion and it didn't work at all for
peer-groups. This fix changes that behavior to do the right
thing.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
In the FRR implementation of EVPN,
eBGP leaf-spine peering for EVPN is fully supported by allowing
the next hop to be propagated and not rewritten at each hop.
There are other changes also related to route import to facilitate this.
However, propagating the next hop is not correct in some cases.
Specifically, if the DC is comprised of multiple PODs
with distinct intra-POD and inter-POD VxLAN tunnels,
EVPN routes received from an adjacent POD by a border/exit leaf
must be propagated into the local POD with the next hop rewritten (to self).
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The loop over all afi's implies that these commands actually need
to loop over all afi's to check the vpn policy. We know the
appropriate afi based upon the node we are in. So just return
the correct afi to look at and then just apply it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this fix, you could configure importing a vrf from inside
the same vrf. This can lead to unexpected behavior in the leaking
process. This fix disallows that behavior.
Ticket: CM-20539
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Tripped over a crash running the cli_crawler that occurred when the
sequence was doing "import vrf NAME" and "no import vrf NAME" inside
a vrf but a default bgp instance had not been created. This fix
auto-creates the default instance if the "import vrf NAME" is
entered and a default instance does not exist.
Ticket: CM-20532
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this fix, the import vrf route-map command only worked
if the route-map existed prior to the command. Additionally, if
the import vrf route-map command was issued without an existing
route-map, the imported prefixes were not removed. This fix
resolves both of thes mis-behaviors. bgp-smoke run with same
failures as base.
Ticket: CM-20459
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7358
Found that when doing "import vrf default" in another vrf, an
extra line was added to the configuration in error. This fix
resolves that incorrect configuration. Manual testing will be
attached to the defect.
Ticket: CM-20467
Signed-off-by: Don Slice <dslice@cumulustnetworks.com>
Reviewed by: Donald Sharp <sharpd@cumulusnetworks.com>
Added the cli for doing route-map filtering on imported routes via
the new "import vrf route-map <NAME> command.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement fixes for route leaking between VRFs through BGP, especially for
the scenario where routes are leaked from a VRF X to multiple other VRFs.
This include making sure that import and export happen via the global VPN
table, setting RD correctly and proper handling for multiple import/export.
Ticket: CM-20256
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the `import vrf XXX` command is entered under
an afi/safi for bgp and the XXX vrf bgp instance
does not yet exist, auto-create it using the same
ASN that the we are importing into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
add the `import vrf XXXX` command
router bgp 4 vrf DONNA
<config>
!
router bgp 4 vrf EVA
<config>
address-family ipv4 uni
import vrf DONNA
!
!
This command will allow for vrf EVA to specify that it would like
to receive the routes from vrf DONNA into it's table.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Remove unused parameter
* Restore behavior described by function comment
* Eliminate NPD caught by static analysis
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for CLI "auto" keyword in vrf->vpn export label:
router bgp NNN vrf FOO
address-family ipv4 unicast
label vpn export auto
exit-address-family
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is relying on bgp vpn-policy. It is needed to configure
several bgp vrf instances, and in each of the bgp instance, configure
the following command under address-family ipv4 unicast node:
[no] rt redirect import RTLIST
Then, a function is provided, that will parse the BGP instances.
The incoming ecommunity will be compared with the configured rt redirect
import ecommunity list, and return the VRF first instance of the matching
route target.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- vpn_leak_to_vpn_active(): check instance type
- vpn_leak_prechange(): qualify with test for active
- vpn_leak_postchange(): remove duplicated call to
vpn_leak_from_vrf_update_all()
- bgp_vty.c: Avoid null-pointer dereference for command "no rt vpn import"
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This commit fixes the handling of incoming parameters passed in
following vty functions:
clear ip bgp ipv6 [safi] prefix []
clear ip bgp [vrf ] ipv6 [safi] prefix []
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
