Description: Currently IPv4 routes with IPv6 link local next hops are
not properly installed in FPM.
Reason is the netlink decoding truncates the ipv6 LL address to 4 byte
ipv4 address.
Ex : fe80:: is directly converted to ipv4 and it results in 254.128.0.0
as next hop for below routes
show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
B>* 2.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 5.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 10.1.0.2/32 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight
1, 02:22:26
Hence this fix converts the ipv6-LL address to ipv4-LL (169.254.0.1)
address before sending it to FPM. This is inline with how these types of
routes are currently programmed into kernel.
Signed-off-by: Nikhil Kelapure <nikhil.kelapure@broadcom.com>
Current implementation doesn't copy nexthop_srv6. This causes unexpected
behavior when receiving SID information and nexthop isn't onlink.t
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Problem:
When IP1:M1 (local) moved to IP1:M2 (remote-VTEP) bgpd continues to
advertise IP1:M1.
Fix:
Local path del is sent to bgp if the neigh was {local-active||peer-active}.
So path del needs to be called before the sync flags (including peer-active)
are cleared.
Ticket: #2706744
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
When we hand set the router-id, but we have choosen a router-id
that is already the `winner` there is no point in updating anyone
with this data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
At startup there exists a time frame where we might not know
a particular vrf's router id. When zebra gets a request for
it let's not just blindly send whatever we have. Let's be
a bit smart and only respond with one if we have one.
The upper level protocol can wait for it to have one.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
vrf_name_to_id() returned VRF_DEFAULT when the vrf name was
unknown, hiding errors. Per community recommendation, vrf_name_to_id()
is now removed and the few callers now use vrf_lookup_by_name()
directly.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Insist on the fact that zclient neighbor state flags are
mapped over netlink state flags. List all the defines
currently known on kernel, and create a netlink API to
convert netlink values to zclient values. The function is
simplified as it is a 1-1 match.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As NHRP expects some notification of neighboring entries on GRE
interface, when a new interface notification is encountered, the
exact neighbor state flag is found. Previously, the flag passed
to the upper layer was forced to NDM_STATE which is REACHABLE,
as can be seen on below trace:
2021/08/25 10:58:39 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x2 cache used 1 type 5
When passing the real value, NHRP received an other value like STALE.
2021/08/25 11:28:44 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x4 cache used 0 type 5
This flag is important for NHRP, as it permits to monitor the link
layer of NHRP entries.
Fixes: d603c0774e ("nhrp, zebra, lib: enforce usage of zapi_neigh_ip structure")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
For some reason commit #ef524230a6baa decided
to remove enums and switch to uint16_t. Which
is not the right thing to do. Put it back
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Maybe with empty nexthop to call zebra_mpls_transit_lsp():
"no mpls lsp (16-1048575)".
So just remove this "gate_str" check. If without "gate" in command, "gtype" is
set to NEXTHOP_TYPE_BLACKHOLE for subsequent processing.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
When NHRP registers to zebra to receive link layer events related to
gre interfaces, then it is interested in receiving also RTM_GETNEIGH
messages.
Fixes ("b3b751046495") nhrpd: link layer registration to notifications
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In zebra_evpn_proc_remote_nh if we do not pass in a long
enough stream, the stream reads will fail. Ensure that
we have enough data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Handle TYPE_IFINDEX nexthops more consistently in a few places;
be more specific about a few integer return values that were
being treated as booleans.
Signed-off-by: Mark Stapp <mjs.ietf@gmail.com>
