There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
rip(ng)d_instance_disable unlinks the vrf from the instance which means
that rip(ng)_interfaces_clean never works, because rip(ng)->vrf is
always NULL there. This leads to the crash #6477.
Clean interfaces before disabling the instance to fix the issue.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Modify code to use lookup function agg_node_get_prefix()
as the abstraction layer. When we rework bgp_node to
bgp_dest this will allow us to greatly limit the amount
of work needed to do that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adding a lock to protect the global running configuration doesn't
help much since the FRR daemons are not prepared to process
configuration changes in a pthread that is not the main one (a
whole lot of new protections would be necessary to prevent race
conditions).
This means the lock added by commit 83981138 only adds more
complexity for no benefit. Remove it now to simplify the code.
All northbound clients, including the gRPC one, should either run
in the main pthread or use synchronization primitives to process
configuration transactions in the main pthread.
This reverts commit 83981138fe.
ripngd operational & config data may already applied and available, while
an external event requests for changing the vrf name. this change
updates the config and operational context of yang.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
if default vrf name is updated, then ripng contexts based on that
hypothetical vrfname, will be enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We should never attempt to remove a list item in the "del" callback
of the list. This is already performed by the list_delete() function,
doing it twice leads to crashes or memory corruption.
Introduce the offset_list_free() function so that we can separate the
removal and deallocation of offset lists into separate functions,
without code duplication. offset_list_del() will be used by the
northbound callbacks to remove offset lists, while offset_list_free()
will be used by rip_clean() to clean up all RIP offset lists using
list_delete(). Do the same for ripngd.
This is a fallout from the ripd/ripngd northbound conversion.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
an interface rmap context can be created from a custom name string,
instead of a vrf. This ability permits to handle several instances of
interface route map in the same vrf. The naming convention will be
transparent on what the name is for in the daemon code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
so as to handle ri/ripng/eigrp multiple instances, the need is to
encapsulate if_rmap hash table into a container context self to each
instance. This work then reviews the if_rmap api, mainly by adding a
if_rmap_ctx context, that is passed for each exchange between library
and the daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
ripd and ripngd were leveraging the zclient code to keep track of
the redistribute configuration, which is what most daemons do. The
problem, however, is that the zclient code uses VRF IDs to identify
VRFs, and VRF IDs are unknown until a VRF is enabled (information
received from zebra). This means we can't configure a redistribute
command on a RIP instance when the corresponding VRF is disabled
(doing so leads to a null-dereference crash right now in both ripd
and ripngd).
To fix this, change the rip/ripng data structures so that they
keep track of the full redistribute configuration and not only the
route-map and metric associated to each command. This is similar
to what bgpd and ospfd are doing to solve the same problem. In the
future the zclient code and all daemons need to be refactored to
consolidate the handling of redistribute configuration in a single
place to reduce code duplication. One of the most important changes
to do is to use VRF names and not VRF IDs to identify VRFs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Turn the "instance" YANG presence-container into a YANG list keyed
by the new "vrf" leaf. This is a backward incompatible change but
this should be ok for now.
* RIPng VRF instances can be configured even when the corresponding
VRF doesn't exist. And a RIPng VRF instance isn't deleted when
the corresponding VRF is deleted. For this to work, implement the
ripng_instance_enable() and ripng_instance_disable() functions
that are called to enable/disable RIPng routing instances when
necessary. A RIPng routing instance can be enabled only when the
corresponding VRF is enabled (this information comes from zebra
and depends on the underlying VRF backend). Routing instances are
stored in the new ripng_instances rb-tree (global variable).
* Add a vrf pointer to the ripng structure instead of storing vrf_id
only. This is much more convenient than using vrf_lookup_by_id()
every time we need to get the vrf pointer from the VRF ID. The
ripng->vrf pointer is updated whenever the VRF enable/disable hooks
are called.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is the last step to make ripngd ready for multi-instance
support.
Remove the ripng global variable and add a "ripng" parameter
to all functions that need to know the RIPng instance they are
working on. On some functions, retrieve the RIPng instance from
the interface variable when it exists (this assumes interfaces can
pertain to one RIPng instance at most, which is ok for VRF support).
In preparation for the next commits (VRF support), add a "vrd_id"
member to the ripng structure, and use ripng->vrf_id instead of
VRF_DEFAULT wherever possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
