The `-i` option on sed isn't standard, and e.g. FreeBSD sed behaves
different regarding the parameter. Avoid it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
libtool does not understand `-coverage` with a single dash. Official
gcc docs also say `--coverage` rather than `-coverage`. (clang lists
both.)
Also, for correct linking, libtool needs `--coverage` in LDFLAGS as
opposed to `-lgcov` (with the latter you get library ordering/deps
issues)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
like the other automake variables, setting `xyz_LDFLAGS` causes
`AM_LDFLAGS` to be ignored for `xyz`. For some reason I had in my mind
that automake doesn't do this for LDFLAGS, but... it does. (Which is
consistent with `_CFLAGS` and co.)
So, all the libraries and modules have been ignoring `AM_LDFLAGS` (which
includes `SAN_FLAGS` too). Set up new `LIB_LDFLAGS` and
`MODULE_LDFLAGS` to handle all of this correctly (and move these bits to
a central location.)
Fixes: #9034
Fixes: 0c4285d77e ("build: properly split CFLAGS from AC_CFLAGS")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
RFC 3623 specifies the Graceful Restart enhancement to the OSPF
routing protocol. This PR implements support for the restarting mode,
whereas the helper mode was implemented by #6811.
This work is based on #6782, which implemented the pre-restart part
and settled the foundations for the post-restart part (behavioral
changes, GR exit conditions, and on-exit actions).
Here's a quick summary of how the GR restarting mode works:
* GR can be enabled on a per-instance basis using the `graceful-restart
[grace-period (1-1800)]` command;
* To perform a graceful shutdown, the `graceful-restart prepare ospf`
EXEC-level command needs to be issued before restarting the ospfd
daemon (there's no specific requirement on how the daemon should
be restarted);
* `graceful-restart prepare ospf` will initiate the graceful restart
for all GR-enabled instances by taking the following actions:
o Flooding Grace-LSAs over all interfaces
o Freezing the OSPF routes in the RIB
o Saving the end of the grace period in non-volatile memory (a JSON
file stored in `$frr_statedir`)
* Once ospfd is started again, it will follow the procedures
described in RFC 3623 until it detects it's time to exit the graceful
restart (either successfully or unsuccessfully).
Testing done:
* New topotest featuring a multi-area OSPF topology (including stub
and NSSA areas);
* Successful interop tests against IOS-XR routers acting as helpers.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This might be faster if at some point in the future the Linux vDSO
supports CLOCK_THREAD_CPUTIME_ID without making a syscall. (Same
applies for other OSes.)
Signed-off-by: David Lamparter <equinox@diac24.net>
...really no reason to force this into a compile time decision. The
only point is avoiding the getrusage() syscall, which can easily be a
runtime decision.
[v2: also split cputime & walltime limits]
Signed-off-by: David Lamparter <equinox@diac24.net>
This option does literally nothing. Not sure since when, but the value
is not used anywhere at all.
Signed-off-by: David Lamparter <equinox@diac24.net>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
This adds _clippy.ELFFile, which provides a fast wrapper around libelf.
The API is similar to / a subset of pyelfutils, which unfortunately is
painfully slow (to the tune of minutes instead of seconds.)
The idea is that xrefs can be read out of ELF files by reading out the
"xref_array" section or "FRRouting/XREF" note.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some ICC command-line options can cause confusion for other
compilers; test for ICC specifically, and only try to use those
options if ICC is being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
mallinfo() is deprecated as of glibc 2.33 and emits a warning if used.
Support mallinfo2() if available.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
This adds the machinery for cross reference points (hence "xref") for
things to be annotated with source code location or other metadata
and/or to be uniquely identified and found at runtime or by dissecting
executable files.
The extraction tool to walk down an ELF file is done and working but
needs some more cleanup and will be added in a separate commit.
Signed-off-by: David Lamparter <equinox@diac24.net>
This new dynamic module makes pathd behave as a PCC for dynamic candidate path
using the external library pcpelib https://github.com/volta-networks/pceplib .
The candidate paths defined as dynamic will trigger computation requests to the
configured PCE, and the PCE response will be used to update the policy.
It supports multiple PCE. The one with smaller precedence will be elected
as the master PCE, and only if the connection repeatedly fails, the PCC will
switch to another PCE.
Example of configuration:
segment-routing
traffic-eng
pcep
pce-config CONF
source-address ip 10.10.10.10
sr-draft07
!
pce PCE1
config CONF
address ip 1.1.1.1
!
pce PCE2
config CONF
address ip 2.2.2.2
!
pcc
peer PCE1 precedence 10
peer PCE2 precedence 20
!
!
!
!
Co-authored-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Specify default via --with-scriptdir at compile time, override default
with --scriptdir at runtime. If unspecified, it's {sysconfdir}/scripts
(usually /etc/frr/scripts)
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
