1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Add a new test to cover the new features for multi hop BFD peers:
- Test that we correctly receive TTL from protocol integration.
- Check minimum TTL usage and 'show' command.
- Check for passive mode.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The commit `bfdd: simplify and remove duplicated code` fixed a problem
that was causing the protocol configuration to override the user
configuration.
In this test case: the peer was configured to be disabled (default is
`shutdown`) and the test was expecting it to get activated (`no shutdown`)
when the protocol converged. I changed the peer default state to
`no shutdown`, however another way to get the same effect is to
configure the protocol to use a profile or don't configure a peer at all
(and use the defaults).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Since the values of ifindices cannot be relied upon across
distributions, simpy remove them from the VNI JSON being compared.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
add tests to check IP address/MAC address associations are learned
from netlink NEWNEIGH messages and are propagated to the remote PE
Signed-off-by: Pat Ruddy <pat@voltanet.io>
With these changes the IS-IS SR topotest should run to completion
about twice as fast compared to before (4 -> 2 minutes on my
machine).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
The vxlan `ip... ` command is failing because we are passing in
`no learning` and that is failing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a bit of a clue to the test_evpn_type5_topo1.py script
to what dut is failing, when things go south.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the topotest mem-leak reporting is enabled, use the same
two-step daemon stop procedure that's used in
the topogen.stop_topology path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The base topology is a two level CLOS with two racks. There are
two PEs/TORs in each rack that provide active-active redundancy to
two dual-attached servers in the rack. And EVPN-PIM is used for
flooded traffic.
Reference: evpn-mh-topo-tests.pdf
Tests have been added for the following functionality -
1. ES management
2. EAD/Type-1 route handling
3. Type-2 route with non-zero ESI
4. MAC sync and remote MAC (with remote-ES destination) handling
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When you make a change to a route-map or a prefix-list it depends on, note
that the route-map needs to be reprocessed for the change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
`sharpd` doesn't handle any route map commands and neither should show
up in route map commands. This makes the CI pass again after not sending
route map commands to it again.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Address-sanitizer runs in the CI appear to require more
memory than is available (at present), so skip the top
x32 route_scale testcase when running with <4G of ram.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Make some changes to the route-scale topotest, in view of
issue #6734. Table-drive the test to eliminate some
repeated code. Assert and fail if a step in the progression
of scale fails. Wait a little longer between checking the show
output - it's costly to generate that output at scale. Add a
memleak testcase.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. evpn_type5_test_topo1 tests started failing in CI for all Ubuntu 18.04 machine,
which are having kernel version: 5.4.0-42-generic
2. We will enable these tests once issue is found and fixed.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
The `log monitor' command is a no-op and actually
outputs a `this doesn't do anything` warning. Let's remove
this cli line from our tests as that don't do anything and
people will look at these configs for guidance.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
add thread info, use "bt full" to get variables and add a bit of
disassembly for good measure.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Increasing BGP convergence wait time to overcome Ubuntu 16.04 arm8 box, as
bgp neighorship is taking more time in this particular testbed.
2. Debugged bgp-ecmp-topo2 failures and here also it seems to be bgp convergence
issue, doing some enhancement in scripts to handle it
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Stop printing hard-coded 30 seconds in a couple of places in
bgp.py in the topojson infra - print the actual time
spent waiting.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
