Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The flag for telling BGP that a route is expected to be installed
first before notifying a peer was always being set upon receipt
of a path that could be accepted as bestpath. This is not correct:
imagine that you have a peer sending you a route and you have a
network statement that covers the same route. Irrelevant if the
network statement would win the flag on the dest was being set
in bgp_update. Thus you could get into a situation where
the network statement path wins but since the flag is set on
the node, it will never be announced to a peer.
Let's just move the setting of the flag into bgp_zebra_announce
and _withdraw. In _announce set the flag to TRUE when suppress-fib
is enabled. In _withdraw just always unset the flag as that a withdrawal
does not need to wait for rib removal before announcing. This will
cover the case when a network statement is added after the route has
been learned from a peer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are some specific edge-cases when is a need to run FRR and another FRR
and/or another BGP implementation on the same box. Relaxing 127.0.0.0/8 for
this case might be reasonable.
An example below peering via 127.0.0.0/8 between FRR and GoBGP:
```
% ss -ntlp | grep 179
LISTEN 0 4096 127.0.0.1:179 0.0.0.0:*
LISTEN 0 128 127.0.0.2:179 0.0.0.0:*
% grep 127.0.0.2 /etc/frr/daemons
bgpd_options=" -A 127.0.0.1 -l 127.0.0.2"
% grep local /etc/gobgp/config.toml
local-address-list = ["127.0.0.1"]
donatas-pc# sh ip bgp summary
IPv4 Unicast Summary (VRF default):
BGP router identifier 192.168.10.17, local AS number 65001 vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 725 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
127.0.0.1 4 65002 7 7 0 0 0 00:02:02 0 0 N/A
Total number of neighbors 1
donatas-pc#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
a) Make it legible what type of message is being passed
back and forth instead of having to guess it from
the insufficient debugs
b) Make it explicit which bgp instance is sending this
data
c) Cleanup bgp_zebra_update to have a cleaner api
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Static Analysis caught a bug where we could be reading
garbage values for labels/num_lables. Fix that by
ensuring it's set to NULL/0 per loop of the mpath.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add some bgp_path_info helper functions for getting the correct l3vni
label, getting the vni from the label stack, and determinging if
the mpath is D-VNI based.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add functionality to always send the L3VNI to zebra as a label
on the route. It will be zebra's job to determine how to use it (i.e.
via Single Vxlan Device or not).
The l3VNI according to rfc should always be the second for a type2 route
and be the only one available for a type5. Hence, we can just grab the
last label in the stack here and add it onto the route.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Take it into consideration for one debug log:
EVPN MAC-IP routes with a L3 NHG id, has no nexthops.
Not "delete", but "add".
Before:
```
Tx route delete VRF 21 192.168.30.253/32 metric 0 tag 0 count 0 nhg 72580649
```
After:
```
Tx route add VRF 21 192.168.30.253/32 metric 0 tag 0 count 0 nhg 72580649
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Current bgpd can't annouce SRv6 locally-generated routes to Zebra
correctly because MPLS label of locally-generated routes is not valid
but sid_info->transposition_len is set to non-zero value. This commit
fixes such kind of issues.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
When the last IPv4 address of an interface is deleted, Linux removes all
routes includes BGP ones using this interface without any Netlink
advertisement. bgpd keeps them in RIB as valid (e.g. installed in FIB).
The previous patch invalidates the associated nexthop groups in zebra
but bgpd is not notified of the event.
> 2022/05/09 17:37:52.925 ZEBRA: [TQKA8-0276P] Not Notifying Owner: connected about prefix 29.0.0.0/24(40) 3 vrf: 7
Look for the bgp_path_info that are unsynchronized with the kernel and
flag them for refresh in their attributes. A VPN route leaking update is
calles and the refresh flag triggers a route refresh to zebra and then a
kernel FIB installation.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Previous commits have introduced a new 8 bits nh_flag in the attr
struct that has increased the memory footprint.
Move the mp_nexthop_prefer_global boolean in the attr structure that
takes 8 bits to the new nh_flag in order to go back to the previous
memory utilization.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Leaked recursive routes are not resolved.
> VRF r1-cust1:
> B> 5.1.0.0/24 [200/98] via 99.0.0.1 (recursive), weight 1, 00:00:08
> * via 192.168.1.2, r1-eth4, weight 1, 00:00:08
> B>* 99.0.0.1/32 [200/0] via 192.168.1.2, r1-eth4, weight 1, 00:00:08
> VRF r1-cust4:
> B 5.1.0.0/24 [20/98] via 99.0.0.1 (vrf r1-cust1) inactive, weight 1, 00:00:08
> B>* 99.0.0.1/32 [20/0] via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:08
When announcing the routes to zebra, use the peer of the ultimate bgp
path info instead of the one of the first parent path info to determine
whether the route is recursive.
The result is:
> VRF r1-cust4:
> B> 5.1.0.0/24 [20/98] via 99.0.0.1 (vrf r1-cust1) (recursive), weight 1, 00:00:02
> * via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:02
> B>* 99.0.0.1/32 [20/0] via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:02
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
At bgpd startup, VRF instances are sent from zebra before the
interfaces. When importing a l3vpn prefix from another local VRF
instance, the interfaces are not known yet. The prefix nexthop interface
cannot be set to the loopback or the VRF interface, which causes setting
invalid routes in zebra.
Update route leaking when the loopback or a VRF interface is received
from zebra.
At a VRF interface deletion, zebra voluntarily sends a
ZEBRA_INTERFACE_ADD message to move it to VRF_DEFAULT. Do not update if
such a message is received. VRF destruction will destroy all the related
routes without adding codes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Use %pI4/%pI6 where possible, otherwise at least atjust stack buffer sizes
for inet_ntop() calls.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
LL address is assigned, but we get a warning, that it's not:
Interface: enp3s0 does not have a v6 LL address associated with it, waiting until one is created for it
```
donatas-pc# sh int enp3s0
Interface enp3s0 is up, line protocol is up
Link ups: 0 last: (never)
Link downs: 0 last: (never)
vrf: default
index 2 metric 0 mtu 1500 speed 100
flags: <UP,BROADCAST,RUNNING,MULTICAST>
v4 Multicast forwarding is on
v6 Multicast forwarding is on
Type: Ethernet
HWaddr: 18:c0:4d:96:fa:3f
inet 192.168.10.17/24
inet6 2a02:4780:abc:0:e776:6220:1e21:44b1/64
inet6 fe80::ca5d:fd0d:cd8:1bb7/64
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
`srv6_locator_chunk_free()` takes care of freeing the memory allocated
for a `struct srv6_locator_chunk` and setting the
`struct srv6_locator_chunk` pointer to NULL.
It is not necessary to explicitly set the pointer to NULL after invoking
`srv6_locator_chunk_free()`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
A programmer can use the `srv6_locator_chunk_free()` function to free
the memory allocated for a `struct srv6_locator_chunk`.
The programmer invokes `srv6_locator_chunk_free()` by passing a single
pointer to the `struct srv6_locator_chunk` to be freed.
`srv6_locator_chunk_free()` uses `XFREE()` to free the memory.
It is the responsibility of the programmer to set the
`struct srv6_locator_chunk` pointer to NULL after freeing memory with
`srv6_locator_chunk_free()`.
This commit modifies the `srv6_locator_chunk_free()` function to take a
double pointer instead of a single pointer. In this way, setting the
`struct srv6_locator_chunk` pointer to NULL is no longer the
programmer's responsibility but is the responsibility of
`srv6_locator_chunk_free()`. This prevents programmers from making
mistakes such as forgetting to set the pointer to NULL after invoking
`srv6_locator_chunk_free()`.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
In the current implementation of bgpd, SRv6 SIDs can be configured only
under the address-family. This enables bgpd to leak IPv6 routes using
an SRv6 End.DT6 behavior and IPv4 routes using an SRv6 End.DT4
behavior. It is not possible to leak both IPv6 and IPv4 routes using a
single SRv6 SID.
This commit adds a new CLI command
"sid vpn per-vrf export <sid_idx|auto>" that enables bgpd to leak both
IPv6 and IPv4 routes using a single SRv6 SID (End.DT46 behavior).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
In order to send correct SRv6 L3VPN advertisement, we need to save
srv6_locator_chunk in vpn_policy. With this information, we can
construct correct SRv6 L3VPN advertisement packets.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
When primary global v6 unicast address is configured on an
unnumbered interface, BGP does not re-advertise updates out
with the new global v6 address as the nexthop
Signed-off-by: Pdoijode <pdoijode@nvidia.com>
RFC4364 describes peerings between multiple AS domains, to ease
the continuity of VPN services across multiple SPs. This commit
implements a sub-set of IETF option b) described in chapter 10 b.
The ASBR to ASBR approach is taken, with an EBGP peering between
the two routers. The EBGP peering must be directly connected to
the outgoing interface used. In those conditions, the next hop
is directly connected, and there is no need to have a transport
label to convey the VPN label. A new vty command is added on a
per interface basis:
This command if enabled, will permit to convey BGP VPN labels
without any transport labels (i.e. with implicit-null label).
restriction:
this command is used only for EBGP directly connected peerings.
Other use cases are not covered.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Running `bgp_srv6l3vpn_to_bgp_vrf` and `bgp_srv6l3vpn_to_bgp_vrf2`
topotests with `--valgrind-memleaks` gives several memory leak errors.
This is due to the way SRv6 locators are removed/unset in bgpd: when
an SRv6 locator is deleted or unset, the memory allocated for the
locator prefix (`tovpn_sid_locator`) is not freed.
This patch adds a `for` loop that iterates over the list of BGP
instances. For each BGP instance using the SRv6 locator to be
removed/unset, we use `XFREE()` to properly free the memory allocated
for `tovpn_sid_locator` after the SRv6 locator is removed or unset.
The memory allocated for `tovpn_sid_locator` cannot be freed before
calling `vpn_leak_postchange_all()`. This is because
after deleting an SRv6 locator, we call `vpn_leak_postchange_all()`
to handle the SRv6 locator deletion and send a BGP Prefix SID withdraw
message. `tovpn_sid_locator` is required to properly build the BGP
Prefix SID withdraw message. After calling `vpn_leak_postchange_all()`
we can safely remove the `tovpn_sid_locator` and free the allocated
memory.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Running `bgp_srv6l3vpn_to_bgp_vrf` and `bgp_srv6l3vpn_to_bgp_vrf2`
topotests with `--valgrind-memleaks` gives several memory leak errors.
This is due to the way SRv6 SIDs are removed in bgpd: when
an SRv6 locator is deleted/unset, all the SIDs allocated from that
locator are removed from the SRv6 functions list
(`bgp->srv6_functions`),but the memory allocated for the SIDs is not
freed.
This patch adds a call to `XFREE()` to properly free the allocated
memory when an SRv6 SID is removed.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Running `bgp_srv6l3vpn_to_bgp_vrf` and `bgp_srv6l3vpn_to_bgp_vrf2`
topotests with `--valgrind-memleaks` gives several memory leak errors.
This is due to the way SRv6 locators are deleted/unset in bgpd: when
an SRv6 locator is deleted/unset, all the chunks of the locator are
removed from the SRv6 locator chunks list (`bgp->srv6_locator_chunks`).
However, the memory allocated for the chunks is not freed.
This patch adds a call to the `srv6_locator_chunk_free()` function to
properly free the allocated memory when an SRv6 locator is removed or
unset.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
RFC 4760 states we SHOULD ignore the NEXT_HOP attribute for BGP Update
messages carrying only MP_REACH_NLRI attributes. Thus we should use the
Network Address of Next Hop field of the MP_REACH_NLRI as the nexthop.
Instead of always looking for BGP_ATTR_NEXT_HOP, this commit ensures:
1) we set mp_nexthop_len to BGP_ATTR_NHLEN_IPV4 for v4 bgp_static routes
2) we check mp_nexthop_len when choosing the nexthop to use for nht
3) we check mp_nexthop_len when choosing the nexthop to send to zebra
4) we check mp_nexthop_len when picking the nexthop to shown by vtysh
Reported-by: Binon Gorbutt <binon@aervivo.com>
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The bgp_path_info_to_ipv6_nexthop will correctly set
the nexthop value. There is no need to test this to
display something that won't be used in debug
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In commit: d70a31a3ef
the Zapi ZEBRA_RULE_ADD message was modified but
the bgp version was not updated appropriately and
when zebra received the message it did not properly
read it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Multipath route may have mixed nexthops of EVPN and IP unicast. Move
EVPN flag to nexthop to support such cases.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Start using mpls_lse_encode/mpls_lse_decode, that is endian-aware, because
we always use host-byte order, should use network-byte.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
