The current reverse logic led to this code construct
if (!pim_nexthop_lookup(...)) {
//Do something successfull
}
This is backwards and will cause logic errors when people
use this code. Fix to use true/false for success/failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: (*,G) mroute uptime is not updated in mroute table,
after deleting and adding the RP
Root cause: When RP gets deleted or becomes not reachable, then
we un-install the entry from the kernel, but still maintains the
entry in the stack. When RP gets re-configured or becomes reachable,
"show ip mroute" shows the uptime, when the channel_oil gets created.
Fix: Introduce a new time mroute_creation in the channel_oil, gets
updated when mroute gets installed in the kernel.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The interface column in pim was limited to 8 or 9 columns
all over the place in pim, fix the code up to allow interface
length to be up to 16 columns.
Ticket: CM-23083
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Suppose we have 2 routers A and B. Both Router A and B have
the same priority of 1000. Router A is the elected DR.
Now suppose B lowers his priority to 1. He still looses the
DR election and we are not sending a hello with the new priority.
Immediately after this A's priority is also lowered to 1, it
looses the election and sends the hello. B receives this hello
and elects A as the DR( since it has the better ip address)
At this point A believes B is the DR, and B believes A is the
DR until such time that the normal hello from B is sent to A,
which if timed correctly can be a significant amount of time).
This code just causes a hello to be sent if the priority is
changed. Now both sides will be able to converge quickly
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When FRR receives IGMP/PIM (*, G) join and RP is not configured or
not reachable, then we are creating a dummy upstream with incoming
interface as NULL.
Added some null checks for the incoming interface, while displaying
the pim upstream information in the cli command "show ip pim upstream".
Signed-off-by: Sarita Patra <saritap@vmware.com>
Add a test command to pim that allows you to reset the keepalive timer
for an upstream to it's max value. This is to allow purposeful testing
of cleanup code in pim, by forcing the keeaplive timer to expire later.
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:10 00:00:52 00:00:25 00:02:54 1
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:11 00:00:51 00:00:24 00:02:53 1
robot# test pim keep 192.168.201.136 225.1.0.0
Setting (192.168.201.136,225.1.0.0) to current keep alive time: 210
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:27 00:00:35 00:00:08 00:03:27 1
robot#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Issue: Configure "ip pim rp x.x.x.x 225.0.0.0/4".
Show running config shows "ip pim rp x.x.x.x 224.0.0.0/4"
This is mis-leading.
Root-cause: Internally 225.0.0.0/4 is getting converted to
224.0.0.0/4 group mask, since the prefix length is 4.
Fix: Restrict the user to configure inconsistent group address
mask by throughing a cli error "Inconsistent address and mask".
Signed-off-by: Sarita Patra <saritap@vmware.com>
Add a command to track if an interface should be in active-active
mode or not. This command is hidden at this time because it
is not finished fully.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The tracking of who have drpriority on an interface
in pim was not displayed anywhere. Add to the show
command for future reference.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In pim_if_new use bool instead of an int to pass
true/false values for what we should create the
pim interface type for.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Both pim_ecmp_nexthop_lookup and pim_ecmp_fib_lookup_if_vif_index
pass the address in 2 times. Make function calls consistent
and just pass in the src once.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When doing nexthop lookups do not permanently allocate
memory in zebra and pim to track the nexthop specified
on the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We know the vrf that we are in when we need to initiate a
rescan of the rpf cache. So pass it in and use that information.
This should help the rescan at scale with several vrf's cutting
out a lot of unnecessary work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Feature of mtrace only IGMP sockets on pim sm and pim
ssm interfaces. Modifed IGMP socket creation and show
igmp interface command output.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'ip pim use-source ...' command returns a hard
success/failure. Allow it to return a soft-failure
for when we re-enter the same line.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When PIM handles some MSDP commands, a repeated command
was causing a CMD_WARNING_CONFIG_FAILED. This should
be a CMD_WARNING. Fix the code to allow vtysh to handle
this appropriately.
Ticket: CM-19053
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we ask PIM to do a CLI search of a random (S,G) if the
(S,G) has no RPF due to no route, let the user know about
the issue instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When displaying the 'show ip pim upstream' command.
Display proper information about the RPF address
choosen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When displaying the mroute table, add ability to fill
in all the missing data that for human eyes can be assumed.
This will allow people using grep over the command
can get more information.
sharpd@robot ~> sudo vtysh -c "show ip mroute fill"
Source Group Proto Input Output TTL Uptime
* 229.1.1.1 STATIC dum0 enp3s0 1 00:11:07 Default-IP-Routing-Table
* 229.1.1.1 STATIC dum0 virbr0 1 00:01:47 Default-IP-Routing-Table
sharpd@robot ~>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adds the ability to filter PIM Joins & IGMP reports on an interface.
Enabling a multicast boundary on an interface for a particular group
will prevent the interface from appearing in the group's OIL.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If pim/igmp is not enabled on an interface, the ->info pointer will be
null. Need to check that before dereferencing it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Start the conversion of pim configuration commands to use
the ferr side channel to allow more detailed information
to be returned to cli commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All the rp debugs were a mish-mash of TRACE or ZEBRA,
but the reality they were all focused on handling NHT
issues associated with the RP's. So let's create
a new debug 'debug pim nht rp' if you are having
issues with RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature does this:
Add the ability to store the non-prefix static RP
entries into a table. Then to lookup the G to
find the RP in that table, finding the longest
prefix match across both prefix-lists and
static RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Error check return from setsockopt and sockets
2) Check return codes for str2prefix
3) Clean up some potential NULL References
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Clean up display of S,GRPt prune state to be more meaningful
2) Upon receipt of a S,GRPt prune make sure we transition to
the correct state
3) Upon loss of a S,GRPt prune make sure we transition to
the correct state as well as immediately send a *,G
join upstream to propagate the loss of the prune.
4) Removal of a weird S,G state being installed upon
loss of a S,G RPt prune.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This could happen if routing isn't up yet but the command did take so we
should exit 0 here. Testing:
root@cel-redxp-10[frr-dwalton76]# vtysh -c 'conf t' -c' ip pim rp
11.11.11.11'
% No Path to RP address specified: 11.11.11.11
root@cel-redxp-10[frr-dwalton76]# echo $?
0
root@cel-redxp-10[frr-dwalton76]#
Upon frr restart vtysh replays pim bfd configuration
cli before pim sm command, this results in failure
of pim bfd config on the VIF as it is not pim enabled yet.
Inside pim bfd configuration, call to create PIM vif
handler if it is not created yet.
no ip pim bfd, if pim is not enabled display warning and return.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This patch does two things:
1) Converts the pim_ifp->ifchannel_list to a pim_ifp->ifchannel_rb
2) Removes the hashing to use the RB RB_FIND instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the redundant information in pim_ifp->pim_ifchannel_list
just call it pim_ifp->ifchannel_list
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pim->ifchannel_list can be duplicated by iterating
over each vrf and then over each pim_ifp->pim_ifchannel_list
Since list handling is taking allot of time at scale
convert over to using this value.
Additionally clean up pim_cmd.c to have helper functions
to handle the actual encoding of data for output.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
'show ip mroute vrf all count' crashes currently
This commit fixes that issue
Ticket: CM-17052
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In show ip pim interface and show ip pim interface <intf>
display State "down" pim enabled interfaces.
Ticket:CM-16809
Reviewed By:CCR-6398
Testing Done:
show ip pim interface
Interface State Address PIM Nbrs PIM DR FHR IfChannels
br1 up 2.0.1.1 0 local 0 0
lo up 6.0.0.1 0 local 0 0
pimreg up 0.0.0.0 0 local 0 0
swp1 down 6.0.1.1 0 local 0 0
swp2 up 6.0.2.1 1 local 0 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
