the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
a distribute_ctx context pointer is returned after initialisation to the
calling daemon. this context pointer will be further used to do
discussion with distribute service. Today, there is no specific problem
with old api, since the pointer is the same in all the memory process.
but the pointer will be different if we have multiple instances. Right
now, this is not the case, but if that happens, that work will be used
for that.
distribute-list initialisation is split in two. the vty initialisation
is done at global level, while the context initialisation is done for
each routing daemon instance.
babel daemon is being equipped with a routing returning the main babel
instance.
also, a delete routine is available when the daemon routing instance is
suppressed.
a list of contexts is used inside distribute_list. This will permit
distribute_list utility to handle in the same daemon to handle more than
one context. This will be very useful in the vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add some BABEL_ERR_XXX error messages and convert over to using
zlog_ferr instead of zlog_err.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
If the user configures some command that is already in the config we
should return CMD_WARNING instead of CMD_WARNING_CONFIG_FAILED
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
This is a direct copy of:
https://github.com/boutier/quagga-merge
From the branch babel-merge
I copied the babeld directory into FRR and then fixed up everything to
compile.
Babeld at this point in time when run will more than likely crash and burn
in it's interfactions with zebra.
I might have messed up the cli, which will need to be looked at
extract.pl.in and vtysh.c need to be fixed up. Additionally we probably
need to work on DEFUN_NOSH conversion in babeld as well
This code comes from:
Matthieu Boutier <boutier@irif.fr>
Juliusz Chroboczek <jch@irif.fr>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The API messages are used by zebra to exchange the interfaces, addresses,
routes and router-id information with its clients. To distinguish which
VRF the information belongs to, a new field "VRF ID" is added in the
message header. And hence the message version is increased to 3.
* The new field "VRF ID" in the message header:
Length (2 bytes)
Marker (1 byte)
Version (1 byte)
VRF ID (2 bytes, newly added)
Command (2 bytes)
- Client side:
- zclient_create_header() adds the VRF ID in the message header.
- zclient_read() extracts and validates the VRF ID from the header,
and passes the VRF ID to the callback functions registered to
the API messages.
- All relative functions are appended with a new parameter "vrf_id",
including all the callback functions.
- "vrf_id" is also added to "struct zapi_ipv4" and "struct zapi_ipv6".
Clients need to correctly set the VRF ID when using the API
functions zapi_ipv4_route() and zapi_ipv6_route().
- Till now all messages sent from a client have the default VRF ID
"0" in the header.
- The HELLO message is special, which is used as the heart-beat of
a client, and has no relation with VRF. The VRF ID in the HELLO
message header will always be 0 and ignored by zebra.
- Zebra side:
- zserv_create_header() adds the VRF ID in the message header.
- zebra_client_read() extracts and validates the VRF ID from the
header, and passes the VRF ID to the functions which process
the received messages.
- All relative functions are appended with a new parameter "vrf_id".
* Suppress the messages in a VRF which a client does not care:
Some clients may not care about the information in the VRF X, and
zebra should not send the messages in the VRF X to those clients.
Extra flags are used to indicate which VRF is registered by a client,
and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client
can unregister a VRF when it does not need any information in that
VRF.
A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF
will automatically register to that VRF.
- lib/vrf:
A new utility "VRF bit-map" is provided to manage the flags for
VRFs, one bit per VRF ID.
- Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a
bit-map;
- Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag
in the given bit-map, corresponding to the given VRF ID;
- Use vrf_bitmap_check() to test whether the flag, in the given
bit-map and for the given VRF ID, is set.
- Client side:
- In "struct zclient", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
default_information
These flags are extended for each VRF, and controlled by the
clients themselves (or with the help of zclient_redistribute()
and zclient_redistribute_default()).
- Zebra side:
- In "struct zserv", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
redist_default
ifinfo
ridinfo
These flags are extended for each VRF, as the VRF registration
flags. They are maintained on receiving a ZEBRA_XXX_ADD or
ZEBRA_XXX_DELETE message.
When sending an interface/address/route/router-id message in
a VRF to a client, if the corresponding VRF registration flag
is not set, this message will not be dropped by zebra.
- A new function zread_vrf_unregister() is introduced to process
the new command ZEBRA_VRF_UNREGISTER. All the VRF registration
flags are cleared for the requested VRF.
Those clients, who support only the default VRF, will never receive
a message in a non-default VRF, thanks to the filter in zebra.
* New callback for the event of successful connection to zebra:
- zclient_start() is splitted, keeping only the code of connecting
to zebra.
- Now zclient_init()=>zclient_connect()=>zclient_start() operations
are purely dealing with the connection to zbera.
- Once zebra is successfully connected, at the end of zclient_start(),
a new callback is used to inform the client about connection.
- Till now, in the callback of connect-to-zebra event, all clients
send messages to zebra to request the router-id/interface/routes
information in the default VRF.
Of corse in future the client can do anything it wants in this
callback. For example, it may send requests for both default VRF
and some non-default VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts:
lib/zclient.h
lib/zebra.h
zebra/zserv.c
zebra/zserv.h
Conflicts:
bgpd/bgp_nexthop.c
bgpd/bgp_nht.c
bgpd/bgp_zebra.c
isisd/isis_zebra.c
lib/zclient.c
lib/zclient.h
lib/zebra.h
nhrpd/nhrp_interface.c
nhrpd/nhrp_route.c
nhrpd/nhrpd.h
ospf6d/ospf6_zebra.c
ospf6d/ospf6_zebra.h
ospfd/ospf_vty.c
ospfd/ospf_zebra.c
pimd/pim_zebra.c
pimd/pim_zlookup.c
ripd/rip_zebra.c
ripngd/ripng_zebra.c
zebra/redistribute.c
zebra/rt_netlink.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zserv.c
zebra/zserv.h
This is the functionality described in Appendix C of RFC 6126. Its
main purpose is to avoid keeping a full source table, which makes it
possible to implement a subset of Babel in just a few hundred lines of
code. However, in Quagga the code for maintaining the source table is
already there, and a parasitic implementation can be simulated using
filtering -- so it makes little sense to keep the functionality.
This commit makes the following lines visible in running-config text,
when respective intervals are configured to non-default values:
* babel hello-interval
* babel update-interval
* babel resend-delay
The primary focus of this commit is to make "show running-config"
command display more current configuration, including some of the bits
previously seen in the output of "show babel running-config". Besides
that, the following commands were renamed for consistency with the
syntax of other components:
"debug *" to "debug babel *" (and moved to top level)
"show babel running-config" to "show babel parameters"
* babel_interface.c
* show_babel_running_config(): rename to show_babel_parameters(),
update syntax pattern, don't call show_babeld_configuration()
* babel_if_init(): update respectively
* babel_enable_if_config_write(): new VTY helper for static
babel_enable_if
* babel_interface.h: add extern declaration
* babel_main.c: unset all debug options by default
* show_babel_main_configuration(): remove debug options decoder
* babel_zebra.c
* babel_debug(): rename to debug_babel(), update syntax pattern
* no_babel_debug(): rename to no_debug_babel(), update syntax pattern
* babelz_zebra_init(): update respectively
* debug_babel_config_write() new VTY helper for static debug_type
* babel_zebra.h: add extern declaration
* babeld.c
* babel_config_write(): add the code to output "debug babel *",
"router babel", "redistribute *" and "network *" statements
* show_babeld_configuration(): dismiss
* babeld.h: remove extern declaration
* babeld.texi: update for renamed commands
* babeld.conf.sample: idem, add debug statements block
Perhaps could it be able to free already free memory (so free(NULL)),
in function interface_reset(). On other hand, it initiated untracked
interfaces, raising (at least) inappropriate messages. Finally, I
remove the BABEL_IF_IS_ENABLE flag, witch was not really usefull.
Note the test if_up isn't weaker, because (...IS_UP => ...IS_ENABLE).
