Add a test to check that the presence of a route-map at
exportation with a 'set extcommunity rt' is enough to allow
the prefix to be exported.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This setup demonstrates the redistribution and the proper
switching operations in an asbr device.
The setup interconnects an internal AS with an external
connected AS.
- the iBGP AS uses BGP-LU as MPLS transport
- the eBGP peering is directly connected and does use the
'mpls bgp forwarding' configuration to accept exterior
updates.
The setup performs the following tests:
- it checks for end to end connectivity from one interior
host h1 to two external hosts h2, and h3.
- it checks that the proper label values are advertised
by the ASBR to the iBGP peer, and the eBGP peer.
- it checks that the 'show mpls table' has additional
MPLS entries that permit transit mpls traffic to transit
across the ASBR. That behaviour is possible with the
'mpls bgp allocate-label-on-nexthop-change' command.
- it checks that withdraw of routes will remve the MPLS
entries.
- it checks that by unconfiguring the 'next-hop-self' option,
the external routes advertised to the internal maintain the
next-hop.
- it checks that a second prefix advertised by r3 with the
same RD, but different label value is using a new label on r2,
and that this new label value is used.
- it checks that when filtering out prefixes from r1, on r2,
then the MPLS label is deallocated, and the MPLS entry is not
present.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
