Iggy Frankovic discovered an ospfd crash when perfomring fuzzing of OSPF LSA
packets. The crash occurs in ospf_te_parse_te() function when attemping to
create corresponding egde from TE Link parameters. If there is no local
address, an edge is created but without any attributes. During parsing, the
function try to access to this attribute fields which has not been created
causing an ospfd crash.
The patch simply check if the te parser has found a valid local address. If not
found, we stop the parser which avoid the crash.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
LDP-Sync is automatically enabled on interfaces when turned on in
router ospf context. The user can remove ldp-sync from running
on an interface, by issuing a "no ip ospd mpls ldp-sync" command.
To remove all ldp-sync interface commands the user must delete
ldp-sync at the router level. The code was not correctly removing
the config. This PR fixes that issue. Now the extra cli
ldp-sync commands are removed when ldp-sync is disabled.
Signed-off-by: Lynne Morrison <lynne.morrison@ibm.com>
When dumping ospf database with json output, decode Extended Link and Extended
Prefix TLVs and sub-TLVs.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Instead of output bulk of data with json output, prepare json context to decode
opaque TLVs and sub-TLVs.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Specifying an area is not relevant anymore. Use it for some time as a hidden
command to avoid breaking the scripts.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
frr-reload.py will walk through all config contexts and prepend no to the CLI
command. This requires that the vtysh shell code accepts a full command.
To Reproduce
vtysh -c "conf t" -c "router ospf" -c "router-info area"
vtysh -c "conf t" -c "router ospf" -c "no router-info area"
% Unknown command: no router-info area
vtysh -c "conf t" -c "router ospf" -c "no router-info"
Signed-off-by: Christian Breunig <christian@breunig.cc>
This fixes the initial implementation of commit 7743f2f8c0 ("OSPFd: Update
Segment Routing PR following review") where it wsa not possible to remove
the "segment-routing node-msd" CLI nodes via vtysh once segment-routing got
disabled.
Closes#14910
Signed-off-by: Christian Breunig <christian@breunig.cc>
Create a single registry of default port values that daemons
are using. Most of these are vty ports, but there are some
others for features like ospfapi and zebra FPM.
Signed-off-by: Mark Stapp <mjs@labn.net>
This belongs in `/var/lib`, not `/var/run`.
Use library facility to load/save, support previous path as fallback,
and do proper fsync().
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
clang-format doesn't understand FRR_DAEMON_INFO is a long macro where
laying out items semantically makes sense.
(Also use only one `FRR_DAEMON_INFO(` in isisd so editors don't get
confused with the mismatching `( ( )`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Fix ospf opaque LSA function table memory leak.
2. Remove incorrect one-to-one association of OSPF info-per-type
to function table (since there many be many).
3. Fix a problem with opaque AS external cleanup that was exposed
by #2.
4. Fix LSA memory leak in ospf_opaque_type9_lsa_if_cleanup().
Signed-off-by: Acee <aceelindem@gmail.com>
Traffic Engineering Database (TED) is fulfill from the various LSA advertised
and received by the router. To remove information on the TED, 2 mechanisms are
used: i) parse TE Opaque LSA when there are flushed and ii) compare the list of
prefixes advertised in the Router LSA with the list of corresponding edges and
subnets contained in the TED. However, this second mechanism assumes that the
Router LSA is unique and contains all prefixes of the advertised router.
But, this is wrong. Prefixes could be advertised with several Router LSA.
This conduct to remove edge and subnet in the TED while it should be maintained.
The result is a faulty test with ospf_sr_te_topo1 topotest when server is heavy
loaded.
This simple patch removed deletion of edges and subnets when parsing the Router
LSA and only removed them when the corresponding TE Opaque LSA is flushed. In
addition, TE Opaque LSA are not flushed when OSPF ajacency goes down. This
patch also correct this second problem.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Segment Router Identifier (SID) could be an index (4 bytes) within a range
(SRGB or SRLB) or an MPLS label (3 bytes). Thus, before calling check_size
macro to verify SID TLVs size, it is mandatory to determine the SID type to
avoid wrong assert.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The ospfd cleanup code is relatively complicated given the need to
appropriately handle the "max-metric router-lsa on-shutdown (5-100)"
command. When that command is configured and an OSPF instance is
unconfigured, the removal of the instance should be deferred to allow
other routers sufficient time to find alternate paths before the
local Router-LSAs are flushed. When ospfd is killed, however, deferred
shutdown shouldn't take place and all instances should be cleared
immediately.
This commit fixes a problem where ospf_deferred_shutdown_finish()
was prematurely exiting the daemon when no instances were left,
inadvertently preventing ospf_terminate() from clearing the ospfd
global variables. Additionally, the commit includes code refactoring
to enhance readability and maintainability.
Fixes#14855.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* On ospf_terminate(), proceed to clear the ospfd global variables even
when no OSPF instance is configured
* Remove double call to route_map_finish()
* Call ospf_opaque_term() to clear the opaque LSA infrastructure
* Clear the `OspfRI.area_info` and `om->ospf` global lists.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. When an OSPF interface is deleted, remove the references in link-local
LSA. Delete the LSA from the LSDB so that the callback has accessibily
to the interface prior to deletion.
2. Fix a double free for the opaque function table data structure.
3. Assure that the opaque per-type information and opaque function table
structures are removed at the same time since they have back pointers
to one another.
4. Add a topotest variation for the link-local opaque LSA crash.
Signed-off-by: Acee <aceelindem@gmail.com>
... and use it instead of fiddling with the `.synchronous` field.
(Make it const while at it.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace `struct list *` with `DLIST(if_connected, ...)`.
NB: while converting this, I found multiple places using connected
prefixes assuming they were IPv4 without checking:
- vrrpd/vrrp.c: vrrp_socket()
- zebra/irdp_interface.c: irdp_get_prefix(), irdp_if_start(),
irdp_advert_off()
(these fixes are really hard to split off into separate commits as that
would require going back and reapplying the change but with the old list
handling)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
INTERFACE_NAMSIZ is just a redefine of IFNAMSIZ and IFNAMSIZ
is the standard for interface name length on all platforms
that FRR currently compiles on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix for the command "show ip ospf vrf NAME graceful-restart helper".
FRR did not show information by vrf's name.
If i have router ospf vrf red, vtysh's command
'show ip ospf vrf red graceful-restart helper' will not show anything.
But command 'show ip ospf vrf all graceful-restart helper' will work
normally. This fix fixes the display of information by vrf's name.
Example:
frr1# show ip ospf vrf vrf-1 graceful-restart helper
VRF Name: vrf-1
OSPF Router with ID (192.168.255.81)
Graceful restart helper support enabled.
Strict LSA check is enabled.
Helper supported for Planned and Unplanned Restarts.
Supported Graceful restart interval: 1800(in seconds).
Signed-off-by: teletajp <teletajp@yandex.ru>
...so that multiple functions can be subscribed.
The create/destroy hooks are renamed to real/unreal because that's what
they *actually* signal.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
```
r1# sh ipv6 ospf6 summary-address
VRF Name: default
aggregation delay interval :5(in seconds)
```
Just hit this random and looks ugly, let's fix it.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Modify empty json object to take input obj
instead of allocating always one.
There are situation where in error condition or no data
case print empty json (`{}`) with already allocated
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The problem was happening because the ospf->oiflist has this behaviour, each interface was removed and added at the end of the list in each ospf_network_run_subnet call, generation an infinite loop.
As a solution, a copy of the list was generated and we interacted with a fixed list.
Signed-off-by: Rodrigo Nardi <rnardi@netdef.org>
Currently when one interface changes its VRF, zebra will send these messages to
all daemons in *order*:
1) `ZEBRA_INTERFACE_DELETE` ( notify them delete from old VRF )
2) `ZEBRA_INTERFACE_VRF_UPDATE` ( notify them move from old to new VRF )
3) `ZEBRA_INTERFACE_ADD` ( notify them added into new VRF )
When daemons deal with `VRF_UPDATE`, they use
`zebra_interface_vrf_update_read()->if_lookup_by_name()`
to check the interface exist or not in old VRF. This check will always return
*NULL* because `DELETE` ( deleted from old VRF ) is already done, so can't
find this interface in old VRF.
Send `VRF_UPDATE` is redundant and unuseful. `DELETE` and `ADD` are enough,
they will deal with RB tree, so don't send this `VRF_UPDATE` message when
vrf changes.
Since all daemons have good mechanism to deal with changing vrf, and don't
use this `VRF_UPDATE` mechanism. So, it is safe to completely remove
all the code with `VRF_UPDATE`.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
