With a BGP configuration with ipv4 peering, and ipv6 peering, an snmpwalk
is stopped while walking over the bgp4v2NlriTable
snmpwalk -c TEST -v2c -On -Ln 1.1.1.2 .1.3.6.1.3.5.1.1.4
[...]
.1.3.6.1.3.5.1.1.4.1.2.1.2.32.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1 = Gauge32: 13380
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0 = Gauge32: 0
>= .1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0
The walk stopped because the index used in the NlriTable entries is
decrementing, and this is against the snmp specifications. Also, the
computed index is wrong, and does not match the provided
draft-ietf-idr-bgp4-mibv2-1 specification.
Fix this by computing a valid index, and by finding out the next
consecutive prefix.
The resulting changes do not break the walk, and the output is changed:
root@dut-vm:~# snmpwalk -v 2c -c public -Ln -On localhost 1.3.6.1.3.5.1.1.9.1
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.2.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.2.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.3.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.3.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.4.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.4.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.5.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = Hex-STRING: 0A C8 00 00
.1.3.6.1.3.5.1.1.9.1.5.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = Hex-STRING: 0A F4 00 00
Fixes: c681e937d7 (bgpd: Implement SNMP
BGP4V2-MIB (bgp4V2NlriTable), part 1)
Fixes: 2ce69011c4 (bgpd: Implement SNMP
BGP4V2-MIB (bgp4V2NlriTable), part 2)
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
These don't need to be documented, most of the time they are obvious,
when they aren't the behavior can just be described in the command
description.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
- Generate index entries automatically
- Remove manual command index entries
- Clean up a few other manual index entries
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Many index entries used '[no] xxx' or 'no xxx', some had both
positive and 'no' forms. Clean that up mostly - index positive
form of commands only.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Updated documentation for routers with a large route table, which breaks
SNMP/AgentX and in some conditions even crashes FRR. The documentation
proposal amends the SNMP configuration to exclude certain OID's that
are not needed in normal cases.
Format-fixed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Bart Vrancken <bart@abuse.io>
The smux.c code has not been able to compile for 2+ years
and no-one has noticed. Additionally net-snmp has marked
smux integration as deprecated for quite some time as well.
Since no-one has noticed and it's been broken and smux integration
is deprecated let's just remove this from the code base.
From looking at the code, it sure looks like SNMP could use
a decent cleanup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Automatically translated all Texinfo files to RST using a script found
on the GCC mailing list[0]. Some formatting manually corrected.
Also created index.rst for building as well as boilerplate Sphinx
conf.py and Makefile.
[0] https://gcc.gnu.org/ml/gcc-patches/2015-11/msg01095.html
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
