Move mp_nexthop_prefer_global boolean attribute to nh_flags. It does
not currently save memory because of the packing.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If the VRF is not yet created and a BGP instance is created for the
VRF, dependent leaked routes are inactive, which is normal. However,
when the VRF interface appears, they remains inactive.
Update route leak when a VRF interface appears. Note that routes to a
deleted VRF are already removed by zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Locally leaked routes remain active after the nexthop VRF interface goes
down.
Update route leaking when the loopback or a VRF interface state change is
received from zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Leaked recursive routes are not resolved.
> VRF r1-cust1:
> B> 5.1.0.0/24 [200/98] via 99.0.0.1 (recursive), weight 1, 00:00:08
> * via 192.168.1.2, r1-eth4, weight 1, 00:00:08
> B>* 99.0.0.1/32 [200/0] via 192.168.1.2, r1-eth4, weight 1, 00:00:08
> VRF r1-cust4:
> B 5.1.0.0/24 [20/98] via 99.0.0.1 (vrf r1-cust1) inactive, weight 1, 00:00:08
> B>* 99.0.0.1/32 [20/0] via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:08
When announcing the routes to zebra, use the peer of the ultimate bgp
path info instead of the one of the first parent path info to determine
whether the route is recursive.
The result is:
> VRF r1-cust4:
> B> 5.1.0.0/24 [20/98] via 99.0.0.1 (vrf r1-cust1) (recursive), weight 1, 00:00:02
> * via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:02
> B>* 99.0.0.1/32 [20/0] via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:02
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a BGP flowspec peering stops, the BGP RIB entries for IPv6
flowspec entries are removed, but not the ZEBRA RIB IPv6 entries.
Actually, when calling bgp_zebra_withdraw() function call, only
the AFI_IP parameter is passed to the bgp_pbr_update_entry() function
in charge of the Flowspec add/delete in zebra. Fix this by passing
the AFI parameter to the bgp_zebra_withdraw() function.
Note that using topotest does not show up the problem as the
flowspec driver code is not present and was refused. Without that,
routes are not installed, and can not be uninstalled.
Fixes: 529efa2346 ("bgpd: allow flowspec entries to be announced to zebra")
Link: https://github.com/FRRouting/frr/pull/2025
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is no function that both sets the nhg id, and sets
the ZAPI_MESSAGE_NHG flag if the nhg id is valid.
Create a ZAPI API to do this, and apply the changes wherever
needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Separate the processing in bgp_zebra_announce(), by separating the
nexthop code in a separate function called
bgp_zebra_announce_parse_nexthop(). This commit does not bring any
functional change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When adding/removing a route, the next-hop can be dumped
with debugging turned on. Move this function in a separate
function. There is no other change in this commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Implement proper memory cleanup for SRv6 functions and locator chunks to prevent potential memory leaks.
The list callback deletion functions have been set.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.asan.bgpd.4180
=================================================================
==4180==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 544 byte(s) in 2 object(s) allocated from:
#0 0x7f8d176a0d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f8d1709f238 in qcalloc lib/memory.c:105
#2 0x55d5dba6ee75 in sid_register bgpd/bgp_mplsvpn.c:591
#3 0x55d5dba6ee75 in alloc_new_sid bgpd/bgp_mplsvpn.c:712
#4 0x55d5dba6f3ce in ensure_vrf_tovpn_sid_per_af bgpd/bgp_mplsvpn.c:758
#5 0x55d5dba6fb94 in ensure_vrf_tovpn_sid bgpd/bgp_mplsvpn.c:849
#6 0x55d5dba7f975 in vpn_leak_postchange bgpd/bgp_mplsvpn.h:299
#7 0x55d5dba7f975 in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3704
#8 0x55d5dbbb6c66 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3164
#9 0x7f8d1716f08a in zclient_read lib/zclient.c:4459
#10 0x7f8d1713f034 in event_call lib/event.c:1974
#11 0x7f8d1708242b in frr_run lib/libfrr.c:1214
#12 0x55d5db99d19d in main bgpd/bgp_main.c:510
#13 0x7f8d160c5c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Direct leak of 296 byte(s) in 1 object(s) allocated from:
#0 0x7f8d176a0d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f8d1709f238 in qcalloc lib/memory.c:105
#2 0x7f8d170b1d5f in srv6_locator_chunk_alloc lib/srv6.c:135
#3 0x55d5dbbb6a19 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3144
#4 0x7f8d1716f08a in zclient_read lib/zclient.c:4459
#5 0x7f8d1713f034 in event_call lib/event.c:1974
#6 0x7f8d1708242b in frr_run lib/libfrr.c:1214
#7 0x55d5db99d19d in main bgpd/bgp_main.c:510
#8 0x7f8d160c5c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
... and use it instead of fiddling with the `.synchronous` field.
(Make it const while at it.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace `struct list *` with `DLIST(if_connected, ...)`.
NB: while converting this, I found multiple places using connected
prefixes assuming they were IPv4 without checking:
- vrrpd/vrrp.c: vrrp_socket()
- zebra/irdp_interface.c: irdp_get_prefix(), irdp_if_start(),
irdp_advert_off()
(these fixes are really hard to split off into separate commits as that
would require going back and reapplying the change but with the old list
handling)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
INTERFACE_NAMSIZ is just a redefine of IFNAMSIZ and IFNAMSIZ
is the standard for interface name length on all platforms
that FRR currently compiles on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let's use the natural data structure in bgp for the prefix display
instead of a bunch of places where we call a translator function.
The %pBD does this and actually ensures data is correct.
Also fix a few spots in bgp_zebra.c where the cast to a NULL
pointer causes the catcher functionality to not work and fix
the resulting crash that resulted.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add guard for `zlog_debug` when bgpd is not connected to zebra
or zebra does not know the bgp instance.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
...so that multiple functions can be subscribed.
The create/destroy hooks are renamed to real/unreal because that's what
they *actually* signal.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the 'redistribute table-direct' command under the bgp address-family
node. Handle the table-direct support wherever needed in the BGP code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Today, when configuring BGP L3VPN mpls, the operator may
use that command to hardset a label value:
> router bgp 65500 vrf vrf1
> address-family ipv4 unicast
> label vpn export <hardset_label_value>
Today, BGP uses this value without checks, leading to potential
conflicts with other control planes like LDP. For instance, if
LDP initiates with a label chunk of [16;72] and BGP also uses the
50 label value, a conflict arises.
The 'label manager' service in zebra oversees label allocations.
While all the control plane daemons use it, BGP doesn't when a
hardset label is in place.
This update fixes this problem. Now, when a hardset label is set for
l3vpn export, a request is made to the label manager for approval,
ensuring no conflicts with other daemons. But, this means some existing
BGP configurations might become non-operational if they conflict with
labels already allocated to another daemon but not used.
note: Labels below 16 are reserved and won't be checked for consistency
by the label manager.
Fixes: ddb5b4880b ("bgpd: vpn-vrf route leaking")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Instead of scaling the bandwith to something between 1 and 100, just
send down the bandwidth Available for the link.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently when one interface changes its VRF, zebra will send these messages to
all daemons in *order*:
1) `ZEBRA_INTERFACE_DELETE` ( notify them delete from old VRF )
2) `ZEBRA_INTERFACE_VRF_UPDATE` ( notify them move from old to new VRF )
3) `ZEBRA_INTERFACE_ADD` ( notify them added into new VRF )
When daemons deal with `VRF_UPDATE`, they use
`zebra_interface_vrf_update_read()->if_lookup_by_name()`
to check the interface exist or not in old VRF. This check will always return
*NULL* because `DELETE` ( deleted from old VRF ) is already done, so can't
find this interface in old VRF.
Send `VRF_UPDATE` is redundant and unuseful. `DELETE` and `ADD` are enough,
they will deal with RB tree, so don't send this `VRF_UPDATE` message when
vrf changes.
Since all daemons have good mechanism to deal with changing vrf, and don't
use this `VRF_UPDATE` mechanism. So, it is safe to completely remove
all the code with `VRF_UPDATE`.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Append zebra and lib to use muliple SRv6 segs SIDs, and keep one
seg SID for bgpd and sharpd.
Note: bgpd and sharpd compilation relies on the lib and zebra files,
i.e if we separate this: lib or zebra or bgpd or sharpd in different
commits - this will not compile.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Link-state prefixes are only intended to be read for a link-state
consumer (i.e. a controler). They cannot be installed in Forwarding
Information Base (FIB).
Do not announce them to zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Modify bgp_fsm_change_status to be connection oriented and
also make the BGP_TIMER_ON and BGP_EVENT_ADD macros connection
oriented as well. Attempt to make peer_xfer_conn a bit more
understandable because, frankly it was/is confusing.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the BGP 'redistribute table' command is used for a given route
table, and BGP configuration is flushed and rebuilt, the redistribution
does not work.
Actually, when flushing the BGP configuration with the 'no router bgp'
command, the BGP redistribute entries related to the 'redistribute table'
entries are not flushed. Actually, at BGP deletion, the table number is
not given as parameter in bgp_redistribute_unset() function, and the
redistribution entry is not removed in zebra.
Fix this by adding some code to flush all the redistribute table
instances.
Fixes: 7c8ff89e93 ("Multi-Instance OSPF Summary")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is based on @donaldsharp's work
The current code base is the struct bgp_node data structure.
The problem with this is that it creates a bunch of
extra data per route_node.
The table structure generates ‘holder’ nodes
that are never going to receive bgp routes,
and now the memory of those nodes is allocated
as if they are a full bgp_node.
After splitting up the bgp_node into bgp_dest and route_node,
the memory of ‘holder’ node which does not have any bgp data
will be allocated as the route_node, not the bgp_node,
and the memory usage is reduced.
The memory usage of BGP node will be reduced from 200B to 96B.
The total memory usage optimization of this part is ~16.00%.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Yuqing Zhao <xiaopanghu99@163.com>
In the netlink-mediated kernel dataplane, each rule is stored
in either an IPv4-specific database or an IPv6-specific database.
PBRD opportunistically gleans each rule's address family value
from its source or destination IP address match value (if either
exists), or from its nexthop or nexthop-group (if it exists).
The 'family' value is particularly needed for netlink during
incremental rule deletion when none of the above fields remain set.
Before now, this address family has been encoded by occult means
in the (possibly otherwise unset) source/destination IP match
fields in ZAPI and zebra.
This commit documents the reasons for maintaining the 'family'
field in the PBRD rule structure, adds a 'family' field in the
common lib/pbr.h rule structure, and carries it explicitly in ZAPI.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Even if some of the attributes in bgp_path_info_extra are
not used, their memory is still allocated every time. It
cause a waste of memory.
This commit code deletes all unnecessary attributes and
changes the optional attributes to pointer storage. Memory
will only be allocated when they are actually used. After
optimization, extra info related memory is reduced by about
half(~400B -> ~200B).
Signed-off-by: Valerian_He <1826906282@qq.com>
Over time the bgp_zebra_announce_default function has gotten
slightly convoluted, clean it up so it's easier to read
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgpd, pbrd: use common pbr encoder
zebra: use common pbr decoder
tests: pbr_topo1: check more filter fields
Purpose:
1. Reduce likelihood of zapi format mismatches when adding
PBR fields due to multiple parallel encoder implementations
2. Encourage common PBR structure usage among various daemons
3. Reduce coding errors via explicit per-field enable flags
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Subset: ZAPI changes to send the new data
Also adds filter_bm field; currently for PBR_FILTER_PCP, but in the
future to be used for all of the filter fields.
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
bgp_zebra_tm_connect calls bgp_zebra_get_table_range which
just used the global zclient. Which of course still had
us exposing the global zclient to read and drop important
data from zebra. This fixes commit 787c61e03c
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
