The compiler is, rightly, pointing out that in some cases it is
possible that the pkt_afi and pkt_safi values are not properly
set and could result in a use before initialized. I do not
actually belive that this is possible, but let's make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Before:
```
192.168.10.17 OPEN has MultiProtocol Extensions capability (1), length 4
192.168.10.17 OPEN has MP_EXT CAP for afi/safi: IPv4/unicast
```
After:
```
192.168.10.17 OPEN has MultiProtocol Extensions capability (1), length 4
192.168.10.17 OPEN has MultiProtocol Extensions capability for afi/safi: IPv4/unicast
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The idea is to disable addpath-rx capability to avoid unnecessary additional
routes installed.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
If we don't advertise any capabilities (dont-capability-negotiate), we
shouldn't set msg size to 65k only if received this capability from another
peer.
Before:
```
~/frr# vtysh -c 'show ip bgp update-group' | grep 'Max packet size'
Max packet size: 65535
```
After:
```
~/frr# vtysh -c 'show ip bgp update-group' | grep 'Max packet size'
Max packet size: 4096
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
1) When a session comes up for a peer and if the peer has not adverised
the GR capabilities, BGP sends a request to Zebra to clear any
stale routes that might exist from that peer.
2) When OPEN message is received from the peer, clear the previously
advertised GR capability by the peer, if the lastest received
OPEN message does not contain the GR capability.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
*Adding helper caller hooks function for signalling from BGPD
to ZEBRA to enable or disable GR feature in ZEBRA depending
on bgp per peer gr configuration.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
When the peer router's gr mode had changed from helper/restart
to disable. The local bgp gr router should reset the peer
router's restart-time stored.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
bgp tcp connection.
When the BGP peer is configured between two bgp routes both routers would create
peer structure , when they receive each other’s open message. In this event both
speakers, open duplicate TCP sessions and send OPEN messages on each socket
simultaneously, the BGP Identifier is used to resolve which socket should be closed.
If BGP GR is enabled the old tcp session is dumped and the new session is retained.
So while this transfer of connection is happening, if all the bgp gr config
is not migrated to the new connection, the new bgp gr mode will never get applied.
Fix Summary:
1. Replicate GR configuration from the old session to the new session in bgp_accept().
2. Replicate GR configuration from stub to full-fledged peer in bgp_establish().
3. Disable all NSF flags, clear stale routes (if present), stop restart & stale timers
(if they are running) when the bgp GR mode is changed to “Disabled”.
4. Disable R-bit in cap, if it is not set the received open message.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Added new show command to show the graceful restart
information for each neighbor.
Cmd: show bgp [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|WORD>] graceful-restart
* Changes to show neighbors commands for displaying
graceful restart information.
Cmd :show [ip] bgp [<view|vrf> VIEWVRFNAME] [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Changes to the capability sending function to advertise
graceful restart capability in the bgp OPEN message.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Duplicated domain name capability messages cause memory leak. The amount
of leaked memory is proportional to the size of the duplicated
capabilities. This bug was introduced in 2015.
To hit this, a BGP OPEN message must contain multiple FQDN capabilities.
Memory is leaked when the hostname portion of the capability is of
length 0, but the domainname portion is not, for any of the duplicated
capabilities beyond the first one.
https://tools.ietf.org/html/draft-walton-bgp-hostname-capability-00
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit makes bgpd to support VPNv4's extended
nexthop capability for bgp-capability negotiation
when BGP open messaging.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This change addresses the following:
1) Ensures logs under DEBUG macro checks are categorized
as zlog_debug instead of zlog_info.
2) Error logs are categorized as zlog_err instead of zlog_info.
3) Rephrasing certain logs to make them appear more intuitive.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
In a number of places, the JSON output had invalid key names for
AFI/SAFI. For example, the key name in JSON was "IPv4 Unicast" which
is invalid as a JSON Key name. Many JSON tools such as those used in
Ansible, jq etc. all fail to parse the output in these scenarios. The
valid name is ipv4Unicast. There's already a routine afi_safi_json()
defined to handle this change, but it was not consistently called.
The non-JSON version was called afi_safi_print() and it merely returned
the CLI version of the string, didn't print anything.
This patch deals with this issue by:
- Renaming afi_safi_print to get_afi_safi_str()
- get_afi_safi_str takes an additional param, for_json which if true
will return the JSON-valid string
- Renaming afi_safi_json to get_afi_safi_json_str()
- Creating a new routine get_afi_safi_vty_str() for printing to vty
- Consistently using get_afi_safi_str() with the appropriate for_json
value
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
Modify the code such that we can auto turn the iana values of afi
and safi to pleasant to read strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The motivation for this patch is to address a concerning behavior of
tx-addpath-bestpath-per-AS. Prior to this patch, all paths' TX ID was
pre-determined as the path was received from a peer. However, this meant
that any time the path selected as best from an AS changed, bgpd had no
choice but to withdraw the previous best path, and advertise the new
best-path under a new TX ID. This could cause significant network
disruption, especially for the subset of prefixes coming from only one
AS that were also communicated over a bestpath-per-AS session.
The patch's general approach is best illustrated by
txaddpath_update_ids. After a bestpath run (required for best-per-AS to
know what will and will not be sent as addpaths) ID numbers will be
stripped from paths that no longer need to be sent, and held in a pool.
Then, paths that will be sent as addpaths and do not already have ID
numbers will allocate new ID numbers, pulling first from that pool.
Finally, anything left in the pool will be returned to the allocator.
In order for this to work, ID numbers had to be split by strategy. The
tx-addpath-All strategy would keep every ID number "in use" constantly,
preventing IDs from being transferred to different paths. Rather than
create two variables for ID, this patch create a more generic array that
will easily enable more addpath strategies to be implemented. The
previously described ID manipulations will happen per addpath strategy,
and will only be run for strategies that are enabled on at least one
peer.
Finally, the ID numbers are allocated from an allocator that tracks per
AFI/SAFI/Addpath Strategy which IDs are in use. Though it would be very
improbable, there was the possibility with the free-running counter
approach for rollover to cause two paths on the same prefix to get
assigned the same TX ID. As remote as the possibility is, we prefer to
not leave it to chance.
This ID re-use method is not perfect. In some cases you could still get
withdraw-then-add behaviors where not strictly necessary. In the case of
bestpath-per-AS this requires one AS to advertise a prefix for the first
time, then a second AS withdraws that prefix, all within the space of an
already pending MRAI timer. In those situations a withdraw-then-add is
more forgivable, and fixing it would probably require a much more
significant effort, as IDs would need to be moved to ADVs instead of
paths.
Signed-off-by Mitchell Skiba <mskiba@amazon.com>
Currently we only support RFC 5549 in bgp via
using the `neighbor swp1 interface remote-as ...`
command. This causes the extended capability
data to be traded as part of the open message.
Additionally at that point in time we notify
zebra to turn on the RA code for that interface
so that the zebra trick of turning the v6 nexthop
into a 169.254.0.1 nexthop and adding a neighbor
entry works.
This code change does 2 things:
1) Modify bgp to pass the extended capability
if we are attempting to establish a v4/unicast
session over a v6 peer. In the past we limited
this to just the LL based peer.
2) Modify the nexthop tracking code to notice
when it receives nexthop data about the global v6
peer to turn on RA code on those interfaces we will
be using. This will allow the v4 route with a v6
nexthop received in zebra to auto translate this
correctly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The return value can be ignored because in case of error both the 'afi'
and 'safi' variables are set to the invalid values (AFI_MAX, SAFI_MAX),
and the invalid values are handled properly afterwards in the 'default'
blocks.
Signed-off-by: F. Aragon <paco@voltanet.io>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Implement support for negotiating IPv4 or IPv6 labeled-unicast address
family, exchanging prefixes and installing them in the routing table, as
well as interactions with Zebra for FEC registration. This is the
implementation of RFC 3107.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introduce internal and IANA defintions for AFI/SAFI and mapping
functions and modify code to use these. This refactoring will
facilitate adding support for other AFI/SAFI whose IANA values
won't be suitable for internal data structure definitions (e.g.,
they are not contiguous).
The commit adds some fixes related to afi/safi testing with 'make check
' command.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ticket: CM-11416
Reviewed By: CCR-3594 (mpls branch)
Testing Done: Not tested now, tested earlier on mpls branch
Enhance struct bgp to add a new flag BGP_FLAG_GR_PRESERVE_FWD, which
allow to set the Preserve State F bit of Graceful Restart capability in
OPEN messages.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
Forward port of a fix from upstream introduced
the need to have data on the new capability codes
that have been introduced.
This commit adds in the missing capabilities.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
There wasn't much missing for VPNv6 to begin with; just a few bits of
de- & encoding and a few lists to be updated.
Signed-off-by: Lou Berger <lberger@labn.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
[Editorial note: Signed-off-by may imply an authorship claim, but need not]
Edited-by: Paul Jakma <paul.jakma@hpe.com> / <paul@jakma.org>
(cherry picked from commit 9da04bca0e994ec92b9242159bf27d89c6743354)
Conflicts:
bgpd/bgp_attr.c
bgpd/bgp_mplsvpn.c
bgpd/bgpd.c
* bgp_open.c: cap_minsize should be CAPABILITY_CODE_RESTART_LEN for RESTART
not 6.
(cherry picked from commit 7748fdc757a2181649dd4956f2767545673ef28d)
This code change does two things:
1) Removes ZEBRA_AFI_XXX #defines since they were redundant information
2) Switches afi_t to an enumerated type so that the compiler
can do a bit more compile time checking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit f3cfc46450cccc5ac035a5a97c5a1a5484205705)
Conflicts:
bgpd/bgp_open.c
bgpd/bgp_open.h
bgpd/bgp_routemap.c
* bgp_open.c: (cap_modsizes) Table of multiple a capability's data size
should fall on, if applicable.
(bgp_capability_parse) Check the header lengthcap_modsizes should fall on.
Inspiration from Cumulus bgpd-capability-cleanup.patch patch, with a
slightly different approach.
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 4078f2eb7a3a94ddb30cfd8b76b054e790aab524)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Silently ignore (without sending a Notification) unexpected values
of AFI, SAFI or Nexthop AFI received in the Extended Next Hop Encoding
capability (defined in RFC 5549). While this RFC only defines certain
values as allowed, that may be changed by a future spec.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-5975
Reviewed By: CCR-3947
Testing Done: test_fuzz 1.11, 1.12 and 1.13
Ensure that when the received OPEN message has errors, NOTIFICATION is
generated with the proper error code.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-5974
Reviewed By: CCR-3945
Testing Done: Manual
Note: This fix should be sent upstream.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com
Ticket: CM-8014
This implements addpath TX with the first feature to use it
being "neighbor x.x.x.x addpath-tx-all-paths".
One change to show output is 'show ip bgp x.x.x.x'. If no addpath-tx
features are configured for any peers then everything looks the same
as it is today in that "Advertised to" is at the top and refers to
which peers the bestpath was advertise to.
root@superm-redxp-05[quagga-stash5]# vtysh -c 'show ip bgp 1.1.1.1'
BGP routing table entry for 1.1.1.1/32
Paths: (6 available, best #6, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
r1(10.0.0.1) r2(10.0.0.2) r3(10.0.0.3) r4(10.0.0.4) r5(10.0.0.5) r6(10.0.0.6) r8(10.0.0.8)
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r2(10.0.0.2) (10.0.0.2)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 8
Last update: Fri Oct 30 18:26:44 2015
[snip]
but once you enable an addpath feature we must display "Advertised to" on a path-by-path basis:
superm-redxp-05# show ip bgp 1.1.1.1/32
BGP routing table entry for 1.1.1.1/32
Paths: (6 available, best #6, table Default-IP-Routing-Table)
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r2(10.0.0.2) (10.0.0.2)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 8
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:44 2015
Local, (Received from a RR-client)
34.34.34.34 (metric 20) from r3(10.0.0.3) (10.0.0.3)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 7
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
56.56.56.56 (metric 20) from r6(10.0.0.6) (10.0.0.6)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 6
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
56.56.56.56 (metric 20) from r5(10.0.0.5) (10.0.0.5)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 5
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
34.34.34.34 (metric 20) from r4(10.0.0.4) (10.0.0.4)
Origin IGP, metric 0, localpref 100, valid, internal
AddPath ID: RX 0, TX 4
Advertised to: r8(10.0.0.8)
Last update: Fri Oct 30 18:26:39 2015
Local, (Received from a RR-client)
12.12.12.12 (metric 20) from r1(10.0.0.1) (10.0.0.1)
Origin IGP, metric 0, localpref 100, valid, internal, best
AddPath ID: RX 0, TX 3
Advertised to: r1(10.0.0.1) r2(10.0.0.2) r3(10.0.0.3) r4(10.0.0.4) r5(10.0.0.5) r6(10.0.0.6) r8(10.0.0.8)
Last update: Fri Oct 30 18:26:34 2015
superm-redxp-05#
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7926
There was a crash from not NULLing out peer->hostname but I cleaned
up a bunch of other suspect ones as well.
This patch adds a hostname capability. The node's hostname and
domainname are exchanged in the new capability and used in show command
outputs based on a knob enabled by the user. The hostname and domainname
can be a maximum of 64 chars long, each.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Ticket: CM-5660
Reviewed By: CCR-2563
Testing Done:
Ticket: CM-6789
Reviewed By: CCR-3263
Testing Done: Manual Testing and smoke tests
Whenever some sort of output is encountered, added a json version with
proper logic as well.
BGP: Make Capability handling a little more robust
This patch does two things:
- Returns the right sub error code when a malformed capability is rcvd
- Verifies that the capability length is a multiple of an individual unit
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
This adds support for BGP RFC 5549 (Extended Next Hop Encoding capability)
* send and receive of the capability
* processing of IPv4->IPv6 next-hops
* for resolving these IPv6 next-hops, itsworks with the current
next-hop-tracking support
* added a new message type between BGP and Zebra for such route
install/uninstall
* zserv side of changes to process IPv4 prefix ->IPv6 next-hops
* required show command changes for IPv4 prefix having IPv6 next-hops
Few points to note about the implementation:
* It does an implicit next-hop-self when a [IPv4 prefix -> IPv6 LL next-hop]
is to be considered for advertisement to IPv4 peering (or IPv6 peering
without Extended next-hop capability negotiated)
* Currently feature is off by default, enable it by configuring
'neighbor <> capability extended-nexthop'
* Current support is for IPv4 Unicast prefixes only.
IMPORTANT NOTE:
This patch alone isn't enough to have IPv4->IPv6 routes installed into
the kernel. A separate patch is needed for that to work for the netlink
interface.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Vivek Venkatraman <vivek@cumulusnetworks.com>
Donald Sharp <sharpd@cumulusnetworks.com>
