Fist, routing tables aren't the most appropriate data structure
to store nexthops and imported routes since we don't need to do
longest prefix matches with that information.
Second, by converting the NHT code to use rb-trees, we can index
the nexthops using additional information, not only the destination
address. This will be useful later to index bgpd's nexthops by
both destination and SR-TE color.
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Display next hop resolution information, whether the "detail" option is
specified or not as it is quite fundamental and only minimally increases
the output.
Introduce option to look at a specific NHT entry, which will also show
the paths associated with that entry.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
A BGP update-group is dynamically created to group together a set of peers
such that any BGP updates can be formed just once for the entire group and
only the next hop attribute may need to be modified when the update is sent
out to each peer in the group. The update formation code attempts to
determine as much as possible if the next hop will be set to our own IP
address for every peer in the group. This helps to avoid additional checks
at the point of sending the update (which happens on a per-peer basis) and
also because some other attributes may/could vary depending on whether the
next hop is set to our own IP or not. Resetting the next hop to our own IP
address is the most common behavior for EBGP peerings in the absence of
other user-configured or internal (e.g., for l2vpn/evpn) settings and
peerings on a shared subnet.
The code had a flaw in the multiaccess check to see if there are peers in
the update group which are on a shared subnet as the next hop of the path
being announced - the source peer could itself be in the same update group
and cause the check to give an incorrect result. Modify the check to skip
the source peer so that the check is more accurate.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
For some reason we are getting a compile error around a variable I didn't
touch in the other commits. Make it happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to have a temp variable to then store that
data in another temporary variable.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The new_afi and afi were being used over and over. Switch
to the end result we want and just use that from the get go.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The creation of a prefix pointer is unnecessary. Save the
prefix as part of the actual data structure. This will
reduce the data needed by 8 bytes per nexthop stored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* IPv6 routes received via a ibgp session with one of its own interface as
nexthop are getting installed in the BGP table.
*A common table to be implemented should take cares of both
ipv4 and ipv6 connected addresses.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
When a BGP next hop tracking (NHT) entry is created for a peer,
display it in the corresponding "show" command output.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Prevent the ebgp sender from changing the nexthop( which is same as the ebgp neighbour ipv6 address),
while sending updates to its ipv6 neighbor.So,if the nexthop of the ipv6 route is same as the ipv6
neighbour address do not change the next hop to your own ip.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Prevent IPv6 routes received via a ibgp session with one of its own interface
ip as nexthop from getting installed in the BGP table.
Implemented IPV6 HASH table, where we need to add any ipv6 address as they
gets configured and delete them from the HASH table as the ipv6 addresses
get unconfigured. The above hash table is used to verify if any route learned
via BGP has nexthop which is equal to one of its its connected ipv6 interface.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
The bgp_connected_set_node_info and bgp_connected_get_node_info
function names were slightly backwards lets fix them up
to bgp_node_set_bgp_connected_ref_info and bgp_node_get_bgp_connected_ref_info
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_nexthop_set_node_info and bgp_nexthop_get_node_info
function names were slightly backwards, rename to bgp_node_set and get
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no reason that bgp should be including zebra
headers into it's code base, it is a violation of
their respective name spaces.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we attempt to register nexthops before we have the zebra
connection, they will not be installed. After we have noticed
that we are up, re-install them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problems were reported with the name of the default vrf and the
default bgp instance being different, creating confusion. This
fix changes both to "default" for consistency.
Ticket: CM-21791
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7658
Testing: manual testing and automated tests before pushing
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Recent changes to the nht code in bgp caused us to actually
keep a true count of v6 nexthop paths when using v4 over v6.
This change introduced a race condition on shutdown on who
got to the bnc cache first( the v4 table or not ). Effectively
we were allowing the continued existence of the path->nexthop
pointing to the freed bnc. This was especially true when
we had route leaking. So when we free the bnc make sure
we clean up the path->nexthop variables pointing at it too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When cleaning up a interface string, from the linked list we were
dropping the name pointer which held the allocated martian address
intf string.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Track the memory type associated with the bartian address
interface a bit better, instead of using MTYPE_TMP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_nexthop_cache data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_connected_ref data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Track the refcount a bit differently as that it is possible
to get into situations where we have multiple calls for the
same ifc. So let's just keep a list of the ifc's off of
each `struct bgp_addr` and then keep the hash entry based
upon list count or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `struct bgp_addr` is not needed for anything other than
the address hash. Isolate this data structure so that it
is not polluting up the name space.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit removes various parts of the bgpd implementation code which
are unused/useless, e.g. unused functions, unused variable
initializations, unused structs, ...
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
When we are shutting down, there exists a code path
where the connected table leaks some memory. Cleanup
the code to remove the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have 2 code paths that were duplicating a bunch of code
for the deletion of connected prefixes.
This simplifies the code path and makes the code look a bit
cleaner.
I did not touch the _add path because the v4 if statement
had some code I did not have time to look into. Future project.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Perf results at scale( >1k peers) showed a non-trivial
amount of time spent in bgp_multiaccess_check_v4. Upon
function examination we are looking up the nexthops
connected node in each call as well as having to unlock
it after each iteration. Rewrite to lookup the nexthop
node once.
This should reduce the node lookup by aproximately 1/2
which should yield some performance results. There are
probably better things to do here but would require
deeper thought.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem with not finding the correct bgp instance when doing the command
"show ip bgp vrf <vrf> nexthop" resolved by setting up the arg values
correctly. Manual testing fine. bgp-smoke had no new failures.
Ticket: CM-17454
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6664
1) Add hash names to all hash_create calls
2) Fix community_hash, ecommunity_hash and lcommunity_hash key
creation
3) Fix output of community and lcommunity iterators( why would
we want to see the memory location of the backet? ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are two parts to this commit:
1. create a database of self tunnel-ip for used in martian nexthop check
In a CLAG setup, the tunnel-ip (VNI UP) notification comes before the clag-anycast-ip comes up in the system.
This was causing our self next hop check to fail and we were instaling routes with martian nexthop in zebra.
We need to keep this info in a seperate database for all local tunnel-ip.
This database will be used in parallel with the self next hop database to martian nexthop checks.
2. When a local VNI comes up, update the tunnel-ip database and filter routes in the RD table if necessary
In case of EVPN we might receive routes from clag peer before the clag-anycast ip and VNI is up on the system.
We will store the routes in the RD table for later processing.
When VNI comes UP, we loop thorugh all the routes and install them in zebra if required.
However, we were missing the martian nexthop check in this code path.
From now onwards, when a VNI comes UP,
we will first update the tunnel-ip database
We then loop through all the routes in RD table and apply martian next hop filter if required.
Things not covered in this commit but are required:
This processing is needed in general when an address becomes a connected address.
We need to loop through all the routes in BGP and apply martian nexthop filter if necessary.
This will be taken care in a seperate bug
Ticket:CM-17271/CM-16911
Reviewed By: ccr-6542
Testing Done: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that the check for martian next hop is correct, including for MP
nexthops, if IPv4.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1) Make [<view|vrf> WORD] consistent
2) Fix inconsistent help string
3) Fix the show .. vrf all command
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
thread.c fails to build properly on systems that do
not have a CLOCK_MONOTONIC. Therefore there is
no need for bgp to have knowledge of it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
With the addition of the AFI_ETHER we need
to initialize the appropriate tables for
nexthop's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Any interface flags/parameter change (e.g., MTU, PROMISC flag change) is
notified by zebra to clients as an "up" event. BGP literally treats this
as the interface coming up and kicks all neighbors on that interface (i.e.,
directly connected peers). When doing so for IPv4 peers on the interface
(numbered or unnumbered /30-/31) or IPv6 numbered peers, peers that may
already be Established are also flapped; when doing so for IPv6 unnumbered
peers (classic 'neighbor swpX interface' scenario with no configured IP
address on interface), only peers not in Established state are processed.
This patch fixes the code to ensure that in all cases, only non-Established
peers are kicked.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Chris Cormier <chriscormier@cumulusnetworks.com>
Ticket: CM-12526
Reviewed By: CCR-5119
Testing Done: Manual, bgp-min
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
Key BGP 'show' commands have been expanded to support 'vrf all':
show ip bgp vrf all summary
show ip bgp vrf all neighbors
show ip bgp vrf all nexthop
show ip bgp vrf all update-group
show ip bgp vrf all
show bgp vrf all summary
show bgp vrf all update-group
show bgp vrf all
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-10402
Reviewed By: CCR-4466
Testing Done: Manual
Ensure commands dealing with update-groups and peer-groups support VRFs.
Also implement a new command "show bgp vrfs" to show summary information of
all configured VRFs. Some additional code cleanup in this area.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-9247
Reviewed By: CCR-4267
Testing Done: Manual
A upstream CR comment was that we had a function that worked the
same for v4 and v6, the code should be consolidated.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The API messages are used by zebra to exchange the interfaces, addresses,
routes and router-id information with its clients. To distinguish which
VRF the information belongs to, a new field "VRF ID" is added in the
message header. And hence the message version is increased to 3.
* The new field "VRF ID" in the message header:
Length (2 bytes)
Marker (1 byte)
Version (1 byte)
VRF ID (2 bytes, newly added)
Command (2 bytes)
- Client side:
- zclient_create_header() adds the VRF ID in the message header.
- zclient_read() extracts and validates the VRF ID from the header,
and passes the VRF ID to the callback functions registered to
the API messages.
- All relative functions are appended with a new parameter "vrf_id",
including all the callback functions.
- "vrf_id" is also added to "struct zapi_ipv4" and "struct zapi_ipv6".
Clients need to correctly set the VRF ID when using the API
functions zapi_ipv4_route() and zapi_ipv6_route().
- Till now all messages sent from a client have the default VRF ID
"0" in the header.
- The HELLO message is special, which is used as the heart-beat of
a client, and has no relation with VRF. The VRF ID in the HELLO
message header will always be 0 and ignored by zebra.
- Zebra side:
- zserv_create_header() adds the VRF ID in the message header.
- zebra_client_read() extracts and validates the VRF ID from the
header, and passes the VRF ID to the functions which process
the received messages.
- All relative functions are appended with a new parameter "vrf_id".
* Suppress the messages in a VRF which a client does not care:
Some clients may not care about the information in the VRF X, and
zebra should not send the messages in the VRF X to those clients.
Extra flags are used to indicate which VRF is registered by a client,
and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client
can unregister a VRF when it does not need any information in that
VRF.
A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF
will automatically register to that VRF.
- lib/vrf:
A new utility "VRF bit-map" is provided to manage the flags for
VRFs, one bit per VRF ID.
- Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a
bit-map;
- Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag
in the given bit-map, corresponding to the given VRF ID;
- Use vrf_bitmap_check() to test whether the flag, in the given
bit-map and for the given VRF ID, is set.
- Client side:
- In "struct zclient", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
default_information
These flags are extended for each VRF, and controlled by the
clients themselves (or with the help of zclient_redistribute()
and zclient_redistribute_default()).
- Zebra side:
- In "struct zserv", the following flags are changed from
"u_char" to "vrf_bitmap_t":
redist[ZEBRA_ROUTE_MAX]
redist_default
ifinfo
ridinfo
These flags are extended for each VRF, as the VRF registration
flags. They are maintained on receiving a ZEBRA_XXX_ADD or
ZEBRA_XXX_DELETE message.
When sending an interface/address/route/router-id message in
a VRF to a client, if the corresponding VRF registration flag
is not set, this message will not be dropped by zebra.
- A new function zread_vrf_unregister() is introduced to process
the new command ZEBRA_VRF_UNREGISTER. All the VRF registration
flags are cleared for the requested VRF.
Those clients, who support only the default VRF, will never receive
a message in a non-default VRF, thanks to the filter in zebra.
* New callback for the event of successful connection to zebra:
- zclient_start() is splitted, keeping only the code of connecting
to zebra.
- Now zclient_init()=>zclient_connect()=>zclient_start() operations
are purely dealing with the connection to zbera.
- Once zebra is successfully connected, at the end of zclient_start(),
a new callback is used to inform the client about connection.
- Till now, in the callback of connect-to-zebra event, all clients
send messages to zebra to request the router-id/interface/routes
information in the default VRF.
Of corse in future the client can do anything it wants in this
callback. For example, it may send requests for both default VRF
and some non-default VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Conflicts:
lib/zclient.h
lib/zebra.h
zebra/zserv.c
zebra/zserv.h
Conflicts:
bgpd/bgp_nexthop.c
bgpd/bgp_nht.c
bgpd/bgp_zebra.c
isisd/isis_zebra.c
lib/zclient.c
lib/zclient.h
lib/zebra.h
nhrpd/nhrp_interface.c
nhrpd/nhrp_route.c
nhrpd/nhrpd.h
ospf6d/ospf6_zebra.c
ospf6d/ospf6_zebra.h
ospfd/ospf_vty.c
ospfd/ospf_zebra.c
pimd/pim_zebra.c
pimd/pim_zlookup.c
ripd/rip_zebra.c
ripngd/ripng_zebra.c
zebra/redistribute.c
zebra/rt_netlink.c
zebra/zebra_rnh.c
zebra/zebra_rnh.h
zebra/zserv.c
zebra/zserv.h
Display the interface name used to resolve a nexthop instead of just
the ifIdx. This is already done for many cases, but was missing for
one scenario.
Signed-off-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-6888
Reviewed By: CCR-3705
Testing Done: Manual verification
This is an import of patch bgpd-show-ifname-for-nht.patch from 2.5-br.
This commit fixes these warnings:
1) bgpd/bgp_nexthop.c - dereferencing pointer 'X' does break strict-aliasing rules
3) ripd/ripd.c - 'ifaddr.prefixlen' may be used uninitialized in this function
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP: Determine peer's IP address if interface has /30, /31
Allow interface-based session config for IPv4 numbered links
if the link address is either /30 or /31. This is not RFC5549,
but can be deployed now, and independent of whether the peer
supports RFC5549 or not.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-By: Vivek Venkataram <vivek@cumulusnetworks.com>
