Modify bgp_fsm_change_status to be connection oriented and
also make the BGP_TIMER_ON and BGP_EVENT_ADD macros connection
oriented as well. Attempt to make peer_xfer_conn a bit more
understandable because, frankly it was/is confusing.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The usage of BGP_EVENT_FLUSH is unnecessarily abstracting the
call into event_cancel_event_ready and in addtion the macro
was not always being used! Just convert to using the actual
event_cancel_event_ready function directly.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The BGP FSM was using the peer as the unit of work
but the FSM is connection focused. So let's switch
it over to using that.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
As part of the conversion to a `struct peer_connection` it will
be desirable to have 2 pointers one for when we open a connection
and one for when we receive a connection. Start this actual
conversion over to this in `struct peer`. If this sounds confusing
take a look at the bgp state machine for connections and how
it resolves the processing of this router opening -vs- this
router receiving an open. At some point in time the state
machine decides that we are keeping one of the two connections.
Future commits will allow us to untangle the peer/doppelganger
duality with this abstraction.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The status and ostatus are a function of the `struct peer_connection`
move it into that data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The bgp_fsm_change_status function takes an int
for the new bgp state, which is an `enum bgp_fsm_status status`
let's convert over to being explicit.bgpd: use the enum instead of an int
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new LL code in:
8761cd6ddb
Introduced the idea of the bgp unnumbered peers using interface up/down
events to track the bgp peers nexthop. This code was not properly
working when a connection was received from a peer in some circumstances.
Effectively the connection from a peer was immediately skipping state transitions
and FRR was never properly tracking the peers nexthop. When we receive the
connection attempt, let's track the nexthop now.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Extend the thread_cancel_event api so that it's more complete:
look in all the lists of events, including io and timers, for
matching tasks. Add a limited version of the api that only
examines tasks in the event and ready queues.
BGP appears to require the old behavior, so change its macro
to use the more limited cancel api.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
* Process FIB update in bgp_zebra_route_notify_owner() and call
group_announce_route() if route is installed
* When bgp update is received for a route which is not installed earlier
(flag BGP_NODE_FIB_INSTALLED is not set) and suppress fib is enabled
set the flag BGP_NODE_FIB_INSTALL_PENDING to indicate fib install is
pending for the route. The route will be advertised when zebra send
ZAPI_ROUTE_INSTALLED status.
* The advertisement delay (BGP_DEFAULT_UPDATE_ADVERTISEMENT_TIME)
is added to allow more routes to be sent in single update message.
This is required since zebra sends route notify message for each route.
The delay will be applied to update group timer which advertises
routes to peers.
Signed-off-by: kssoman <somanks@gmail.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This function is poorly named; it's really used to allow the FSM to
decide the next valid state based on whether a peer has valid /
reachable nexthops as determined by NHT or BFD.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
In PR #6052 which fixes issue #5963 the bgp fsm events
were confused with the bgp fsm status leading
to a bug. Let's start separating those out
so these types of failures cannot just
easily occur.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Selection Deferral Timer for Graceful Restart.
* Added selection deferral timer handling function.
* Route marking as selection defer when update message is received.
* Staggered processing of routes which are pending best selection.
* Fix for multi-path test case.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Added new show command to show the graceful restart
information for each neighbor.
Cmd: show bgp [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|WORD>] graceful-restart
* Changes to show neighbors commands for displaying
graceful restart information.
Cmd :show [ip] bgp [<view|vrf> VIEWVRFNAME] [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Added FSM for peer and global configuration for graceful restart
* Added debug option BGP_GRACEFUL_RESTART for logs specific to
graceful restart processing
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Generally available hook for plugging application-specific
code in for bgp peer change events.
This hook (peer_status_changed) replaces the previous, more
specific 'peer_established' hook with a more general-purpose one.
Also, 'bgp_dump_state' is now registered under this hook.
Signed-off-by: Marton Kun-Szabo <martonk@amazon.com>
if bfd comes back up, and a bgp reconnection is in progress, theorically
it should be necessary to wait for the end of the reconnection process.
however, since that reconnection process may take some time, update the
fsm by cancelling the connect timer. This done, one just have to call
the start timer.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Despaghettification of bgp_packet.c and bgp_fsm.c
Sometimes we call bgp_event_update() inline packet parsing.
Sometimes we post events instead.
Sometimes we increment packet counters in the FSM.
Sometimes we do it in packet routines.
Sometimes we update EOR's in FSM.
Sometimes we do it in packet routines.
Fix the madness.
bgp_process_packet() is now the centralized place to:
- Update message counters
- Execute FSM events in response to incoming packets
FSM events are now executed directly from this function instead of being
queued on the thread_master. This is to ensure that the FSM contains the
proper state after each packet is parsed. Otherwise there could be race
conditions where two packets are parsed in succession without the
appropriate FSM update in between, leading to session closure due to
receiving inappropriate messages for the current FSM state.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Move and modify all network input related code to bgp_io.c
* Add a real input buffer to `struct peer`
* Move connection initialization to its own thread.c task instead of
piggybacking off of bgp_read()
* Tons of little fixups
Primary changes are in bgp_packet.[ch], bgp_io.[ch], bgp_fsm.[ch].
Changes made elsewhere are almost exclusively refactoring peer->ibuf to
peer->curr since peer->ibuf is now the true FIFO packet input buffer
while peer->curr represents the packet currently being processed by the
main pthread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This means there are no ties into the SNMP code anymore other than the
init call at startup.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Ticket: CM-7861
Reviewed by: CCR-3651
Testing: See bug
bgp is using both bm->master and master pointers interchangebly
for thread manipulation. Since they are the same thing consolidate
to one pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch implements the 'update-groups' functionality in BGP. This is a
function that can significantly improve BGP performance for Update generation
and resultant network convergence. BGP Updates are formed for "groups" of
peers and then replicated and sent out to each peer rather than being formed
for each peer. Thus major BGP operations related to outbound policy
application, adj-out maintenance and actual Update packet formation
are optimized.
BGP update-groups dynamically groups peers together based on configuration
as well as run-time criteria. Thus, it is more flexible than update-formation
based on peer-groups, which relies on operator configuration.
[Note that peer-group based update formation has been introduced into BGP by
Cumulus but is currently intended only for specific releases.]
From 11098af65b2b8f9535484703e7f40330a71cbae4 Mon Sep 17 00:00:00 2001
Subject: [PATCH] updgrp commits
COMMAND:
Possible forms of the command configuration:
[no] bgp max-med administrative
[no] bgp max-med administrative <max-med-value>
[no] bgp max-med on-startup <period>
[no] bgp max-med on-startup <period> <max-med-value>
DESCRIPTION:
'administrative' takes effect from the time of the config until the config is
removed.
'on-startup' is effective only at the startup time for the given '<period>'
after the first peer is established.
'<max-med-value>' is used as the MED value to be sent out when the max-med
is effective. Default max-med value is 4294967294.
NOTE:
When max-med is active, MED is changed only in the outgoing attributes to the
peers, it doesn't modify any MED specific state of the attributes in BGP on
the local node.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
BGP: Fix FSM to handle active/passive connections better
The existing code didn't work well when dual connections resulted between
peers during session bringup. This patch fixes that.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
