The MTYPE_BGP memory type was being over used as
both the handler for the bgp instance itself as
well as memory associated with name strings.
Let's separate out the two.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The dest pointer may be freed( but should not be
due to locking ). Let's ensure that this assumption
is true and make coverity happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There exist two spots in this function where the dest could be
freed, but is not due to locking, but coverity thinks it might
so let's make the function happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
But never really does due to locking, but since it can
we need to treat it like it does and ensure that FRR
is not making a mistake, by using memory after it
has been freed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is based on @donaldsharp's work
The current code base is the struct bgp_node data structure.
The problem with this is that it creates a bunch of
extra data per route_node.
The table structure generates ‘holder’ nodes
that are never going to receive bgp routes,
and now the memory of those nodes is allocated
as if they are a full bgp_node.
After splitting up the bgp_node into bgp_dest and route_node,
the memory of ‘holder’ node which does not have any bgp data
will be allocated as the route_node, not the bgp_node,
and the memory usage is reduced.
The memory usage of BGP node will be reduced from 200B to 96B.
The total memory usage optimization of this part is ~16.00%.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Yuqing Zhao <xiaopanghu99@163.com>
As part of the conversion to a `struct peer_connection` it will
be desirable to have 2 pointers one for when we open a connection
and one for when we receive a connection. Start this actual
conversion over to this in `struct peer`. If this sounds confusing
take a look at the bgp state machine for connections and how
it resolves the processing of this router opening -vs- this
router receiving an open. At some point in time the state
machine decides that we are keeping one of the two connections.
Future commits will allow us to untangle the peer/doppelganger
duality with this abstraction.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The status and ostatus are a function of the `struct peer_connection`
move it into that data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Found some code where bgp was not unlocking the dest
and rd_dest when walking the tree attempting to
find something to install.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Even if some of the attributes in bgp_path_info_extra are
not used, their memory is still allocated every time. It
cause a waste of memory.
This commit code deletes all unnecessary attributes and
changes the optional attributes to pointer storage. Memory
will only be allocated when they are actually used. After
optimization, extra info related memory is reduced by about
half(~400B -> ~200B).
Signed-off-by: Valerian_He <1826906282@qq.com>
Consider the scenario of evpn, the box has some type-5 ECMP routes.
After one of its remote peers is removed ( or down ), `show evpn rmac vni all`
kept no change **sometimes**, it means the rmac of the removed peer maybe is
still in this box, and the traffic will be wrongly forwarded to the removed
peer.
The root cause is that the best path selection for type-5 routes maybe
keep no change and the best path is not routed to the removed peer, so `bgpd`
wrongly doesn't tell `zebra` to remove ( withdraw ) the type-5 routes owned
by the removed peer.
So, add a new flag to force the deletion.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Adds a generalized martian reimport function used for triggering a
relearn/reimport of EVPN routes that were previously filtered/deleted
as a result of a "self" check (either during import or by a martian
change handler). The MAC-VRF SoO is the first consumer of this function,
but can be expanded for use with Martian Tunnel-IPs, Interface-IPs,
Interface-MACs, and RMACs.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Currently we have a handler function that will walk the global EVPN
rib and unimport/remove routes matching a local IP/TIP. This generalizes
this function so that it can be re-used for other BGP Martian entry
types. Now this can be used to unimport routes when the MAC-VRF SoO is
reconfigured.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
For whatever reason, we were only updating tip_hash when we processed an
L2VNI add/del. This adds tip_hash updates to the L3VNI add/del codepaths
so that their VTEP-IPs are also used when when considering martian
addresses, e.g. bgp_nexthop_self().
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Initial support for configuring an SoO for all MAC-VRFs (EVIs/L2VNIs).
This provides a topology-independent method of preventing EVPN routes
from one MAC-VRF "site" (an L2 domain) from being imported by other PEs
in the same MAC-VRF "site", similar to how SoO is traditionally used in
L3VPN to identify and break loops for an L3/IP-VRF "site".
One example of where a MAC-VRF SoO can be used to avoid an L2 control
plane loop is with Active/Active MLAG VTEPs. For a given L2 site only
one control plane should be active. SoO can be used to ID/ignore entries
originated from the local MAC-VRF site so that EVPN will not attempt to
manage entries that are already handled by MLAG.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
bgp_create() and bgp_free() already call EVPN-specific handlers,
so there's no need to XCALLOC/XFREE BGP_EVPN_INFO directly. Let's move
all the references to MTYPE_BGP_EVPN_INFO into the EVPN specific files.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Before this patch, this function wasn't used in the code. Let's reuse this
since it's uses the same pattern for encoding route-target extcommunity.
Also reuse encode_route_target_as[4]() as well.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When a `no router bgp XXX` is issued and the bgp instance
is in the process of shutting down, do not allow a l3vni
change coming up from zebra to do anything. We can just
safely ignore it at this point in time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
As remind, the attr attribute is a structure that contains
the attributes for a given BGP update. In order to avoid too much
memory consumption, the attr structure is stored in a hash table.
As consequence, other BGP updates may reuse the same attr. The
storage in the hash table is done when calling bgp_attr_intern(),
and a key is calculated based on all the attributes values of the
structure.
In BGP EVPN, when modifying the attributes of the attr structure
after having interned it, this means that some BGP updates will
want to use the old reference, whereas a new attr value is used.
Because in BGP EVPN, the modifications are done on a per BGP update
basis, a new attr entry specific to that BGP update should be created.
This is why a local_attr structure is done, modified, then later
interned.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add some bgp_path_info helper functions for getting the correct l3vni
label, getting the vni from the label stack, and determinging if
the mpath is D-VNI based.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
The route-distinguisher string can be expressed in different
ways when the AS number is part of the RD. And the configured
string value has to be kept intact.
The following vty commands store the string value internally:
- router bgp / address-family ipv4 unicast / rd vpn export <>
- router bgp / address-family l2vpn evpn / rd <>
- router bgp / address-family l2vpn evpn / vni <> / rd <>
The vty commands where RD is configured in the below places is
not considered:
- router bgp / rfapi related commands
- router bgp / address-family xxx xxx / network .. rd <>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new keyword permits changing the BGP as-notation output:
- [no] router bgp <> [vrf BLABLA] [as-notation [<dot|plain|dot+>]]
At the BGP instance creation, the output will inherit the way the
BGP instance is declared. For instance, the 'router bgp 1.1'
command will configure the output in the dot format. However, if
the client wants to choose an alternate output, he will have to
add the extra command: 'router bgp 1.1 as-notation dot+'.
Also, if the user wants to have plain format, even if the BGP
instance is declared in dot format, the keyword can also be used
for that.
The as-notation output is only taken into account at the BGP
instance creation. In the case where VPN instances are used,
a separate instance may be dynamically created. In that case,
the real as-notation format will be taken into acccount at the
first configuration.
Linking the as-notation format with the BGP instance makes sense,
as the operators want to keep consistency of what they configure.
One technical reason why to link the as-notation output with the
BGP instance creation is that the as-path segment lists stored
in the BGP updates use a string representation to handle aspath
operations (by using regexp for instance). Changing on the fly
the output needs to regenerate this string representation to the
correct format. Linking the configuration to the BGP instance
creation avoids refreshing the BGP updates. A similar mechanism
is put in place in junos too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is a preliminary work to handle various ways to configure
a BGP Autonomous System. When creating a BGP instance, the
user may want to define the AS number as a dotted value,
instead of using an integer value.
To handle both cases, an as_pretty char attribute will store
the as number as it has been given to the vtysh command:
router bgp <as number>
Whenever the as integer of the BGP instance was dumped,
the as_pretty original format is used.
The json output reuses the integer value to keep backward
compatibility with old displays.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
These two functions always return 0. As such any and all
tests against this make no sense. Remove the return 0
to a void and follow the chain, logically, to remove all
the dead code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Moves the old/new IP comparison into handle_tunnel_ip_change instead of
expecting the caller to do the check on their own.
Also changes handle_tunnel_ip_change to return void since it only ever
returned 0 in all cases.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
When processing a new local VNI, we were always walking the global EVPN
table to look for routes that needed to be removed due to a martian
nexthop change (specifically a tunnel-ip change).
Since the martian TIP table is global (all VNIs) + the walk is also in
the global table (all VNIs), we can trust that any new TIP from any VNI
would result in routes getting removed from the global table and
unimported from all live (L2)VNIs.
i.e.
The only time this update is actionable is if we are adding/removing an
IP from the martian TIP table, and we do not need to walk the table for
normal refcount adjustments.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
