When we specify remote-as as external/internal, we need to set local_as to
bgp->as, instead of bgp->confed_id. Before this patch, (bgp->as != *as) is
always valid for such a case because *as is always 0.
Also, append peer->local_as as CONFED_SEQ to avoid other side withdrawing
the routes due to confederation own AS received and/or malformed as-path.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Because mp_nexthop_len attribute value stands for the length
to encode in the stream, simplify the way the nexthop is
forged.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The peer pointer theorically have a NULL bgp pointer. This triggers
a SA issue. So let us fix it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Each BGP prefix may have an as-path list attached. A forged
string is stored in the BGP attribute and shows the as-path
list output.
Before this commit, the as-path list output was expressed as
a list of AS values in plain format. Now, if a given BGP instance
uses a specific asnotation, then the output is changed:
new output:
router bgp 1.1 asnotation dot
!
address-family ipv4 unicast
network 10.200.0.0/24 route-map rmap
network 10.201.0.0/24 route-map rmap
redistribute connected route-map rmap
exit-address-family
exit
!
route-map rmap permit 1
set as-path prepend 1.1 5433.55 264564564
exit
ubuntu2004# do show bgp ipv4
BGP table version is 2, local router ID is 10.0.2.15, vrf id 0
Default local pref 100, local AS 1.1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 4.4.4.4/32 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
*> 10.0.2.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
10.200.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
10.201.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
The changes include:
- the aspath structure has a new field: asnotation type
The ashash list will differentiate 2 aspaths using a different
asnotation.
- 3 new printf extensions display the as number in the wished
format: pASP, pASD, pASE for plain, dot, or dot+ format (extended).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In ipv6 vpn, when the global and the local ipv6 address are received,
when re-transmitting the bgp ipv6 update, the nexthop attribute
length must still be 48 bytes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The idea is to drop unwanted attributes from the BGP UPDATE messages and
continue by just ignoring them. This improves the security, flexiblity, etc.
This is the command that Cisco has also.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
At bgpd startup, VRF instances are sent from zebra before the
interfaces. When importing a l3vpn prefix from another local VRF
instance, the interfaces are not known yet. The prefix nexthop interface
cannot be set to the loopback or the VRF interface, which causes setting
invalid routes in zebra.
Update route leaking when the loopback or a VRF interface is received
from zebra.
At a VRF interface deletion, zebra voluntarily sends a
ZEBRA_INTERFACE_ADD message to move it to VRF_DEFAULT. Do not update if
such a message is received. VRF destruction will destroy all the related
routes without adding codes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If 'network import-check' is defined on the source BGP session, prefixes
that are stated in the network command cannot be leaked to the other
VRFs BGP table even if they are present in the origin VRF RIB if the
'rt import' statement is defined after the 'network <prefix>' ones.
When a prefix nexthop is updated, update the prefix route leaking. The
current state of nexthop validation is now stored in the attributes of
the bgp path info. Attributes are compared with the previous ones at
route leaking update so that a nexthop validation change now triggers
the update of destination VRF BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The function bgp_packet_mpattr_prefix was using an if statement
to encode packets to the peer. Change it to a switch and make
it handle all the cases and fail appropriately when something
has gone wrong. Hopefully in the future when a new afi/safi
is added we can catch it by compilation breaking instead of
weird runtime errors
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This function was just using default: case statements for
the encoding of nlri's to a peer. Lay out all the different
cases and make things fail hard when a dev escape is found.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The function bgp_packet_mpattr_prefix_size had an if/else
body that allowed people to add encoding types to bgpd
such that we could build the wrong size packets. This
was exposed recently in commit:
0a9705a1e0
Where it was discovered flowspec was causing bgp update
messages to exceed the maximum size and the peer to
drop the connection. Let's be proscriptive about this
and hopefully make it so that things don't work when
someone adds a new safi to the system ( and they'll have
to update this function ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, bgp_packet_mpattr_prefix_size (bgpd/bgp_attr.c:3978) always returns zero for Flowspec prefixes.
This is because, for flowspec prefixes, the prefixlen attribute of the prefix struct is always set to 0, and the actual length is bytes is set inside the flowspec_prefix struct instead (see lib/prefix.h:293 and lib/prefix.h:178).
Because of this, with a large number of flowspec NLRIs, bgpd ends up building update messages that exceed the maximum size and cause the peer to drop the connection (bgpd/bgp_updgrp_packet.c:L719).
The proposed change allows the bgp_packet_mpattr_prefix_size to return correct result for flowspec prefixes.
Signed-off-by: Stephane Poignant <stephane.poignant@proton.ch>
It's possible to send less data then the length you say you are.
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use %pI4/%pI6 where possible, otherwise at least atjust stack buffer sizes
for inet_ntop() calls.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Given that two routers are connected each other and they have IPv6
addresses and they establish BGP peer with extended-nexthop capability
and one router tries to advertise locally-generated IPv4-VPN routes to
other router.
In this situation, bgpd on the router that tries to advertise IPv4-VPN
routes will be crashed with "invalid MP nexthop length (AFI IP6)".
This issue is happened because MP_REACH_NLRI path attribute is not
generated correctly when ipv4-vpn routes are advertised to IPv6 peer.
When IPv4 routes are leaked from VRF RIB, the nexthop of these routes
are also IPv4 address (0.0.0.0/0 or specific addresses). However,
bgp_packet_mpattr_start only covers the case of IPv6 nexthop (for IPv6
peer).
ipv4-unicast routes were not affected by this issue because the case of
IPv4 nexthop is covered in `else` block.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
Currently bgpd uses the opaque codepoint (0xFFFF) in the BGP
advertisement. In this commit, we update bgpd to use the SRv6 codepoints
defined in the IANA SRv6 Endpoint Behaviors Registry
(https://www.iana.org/assignments/segment-routing/segment-routing.xhtml)
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
For now, only if the knob is enabled. Later this gonna be (most likely) removed
and routes with AS_SET / AS_CONFED_SET will be denied by default.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
According to RFC9234:
An UPDATE message with a malformed OTC Attribute SHALL be handled
using the approach of "treat-as-withdraw".
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The command `debug bgp allow-martian` is not actually
a debug command it's a command that when entered allows
bgp to not reset a peering when a martian nexthop is
passed in the nlri.
Add the `bgp allow-martian-nexthop` command and allow it to be
used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
When implementing the bgp_packet_mpunreach_prefix a uint8_t array
of 3 bytes was created and then assigned to a label type, which
is 4 bytes and then various pointer work is done on it. Eventually
coverity is complaining that the 3 -vs- 4 bytes is not enough
to properly dereference it. Just make the uint8_t 4 bytes
and be done with it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The compiler is, rightly, pointing out that in some cases it is
possible that the pkt_afi and pkt_safi values are not properly
set and could result in a use before initialized. I do not
actually belive that this is possible, but let's make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
https://datatracker.ietf.org/doc/html/rfc7947#section-2.2
Optional recognized and unrecognized BGP attributes,
whether transitive or non-transitive, SHOULD NOT be updated by the
route server (unless enforced by local IXP operator configuration)
and SHOULD be passed on to other route server clients.
By default LB ext-community works with iBGP peers. When we receive a route
from eBGP peer, we can send LB ext-community to iBGP peers.
With this patch, allow sending LB ext-community to iBGP/eBGP peers if they
are set as RS clients.
FRR does not send non-transitive ext-communities to eBGP peers, but for
example GoBGP sends and if it's set as RS client, we should pass those attributes
towards another RS client.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When reading the BGP_PREFIX_SID_SRV6_L3_SERVICE_SID_STRUCTURE
it is possible that the length read in the packet is insufficiently
large enough to read a BGP_PREFIX_SID_SRV6_L3_SERVICE_SID_STRUCTURE.
Let's ensure that it is.
Fixes: #10860
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgp_attr_undup does the same thing as bgp_attr_flush – frees the
temporary data that might be allocated when applying a route-map. There
is no need to have two separate functions for that.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Avoid use-after-free situation. Flush attr_extra structure only when flushing
all attributes, not just for unintern.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Description:
Replacing memcmp at certain places,
to avoid the coverity issues caused by it.
Co-authored-by: Kantesh Mundargi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
This is the initial work to move all non IPv4/IPv6 AFI related
attributes/structs to attr->extra to avoid unnecesarry allocations.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Always free the locally allocated attribute not the one we are using for
return. This fixes a memory leak and a crash when AS Path is set with
route-map.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If soft-reconfiguration is enabled, bgp_adj_in_set will be called
from bgp_update and bgp_adj_in_set will call bgp_attr_intern to intern
attr pointer. If given attr isn't found in attrhash, hash_get will call
bgp_attr_hash_alloc to allocate new attr structure. In
bgp_attr_hash_alloc, NULL will be assigned to srv6_vpn field and
srv6_l3vpn field in origin attr pointer. attr->srv6_vpn and
attr->srv6_l3vpn are interned in bgp_attr_intern, so NULL assignment
isn't needed.
And, these fields are used later in bgp_update to set SRv6 information
to bgp_path_info. If bgp_attr_hash_alloc assign NULL to these fields,
SRv6 information will be lost and incorrect routes are inserted into
data-plane.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
draft-ietf-bess-srv6-services-07 defines new SID structure Sub-Sub-TLV.
This patch adds SID structure information to bgp_attr_srv6_l3vpn. This
patch also defines default SID stucture used by following patches.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
This is to avoid breaking changes between existing deployments of
extended community for bandwidth encoding. By default FRR uses uint32
to encode bandwidth, which is not as the draft requires (IEEE floating-point).
This switch enables the required encoding per-peer.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When bgp receives the admin distance from a redistribution statement
let's store that distance for later usage.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
the realloc man page:
If ptr is NULL, then the call is equivalent to malloc(size)
This should be sufficient for our needs to not have to have
XMALLOC and XREALLOC
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Process this a bit later instead of bgp_attr_parse() which is causing
the session to be shutdown upon receiving a prefix with AS number 0 inside.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This commit make bgpd to support VPN SID advertisement
as BGP Prefix-SID when route-leaking from BGP-vrf instance
to BGP-vpn instance.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit fix bgpd's prefix-sid type4,5 feature which has
miss implementation from https://github.com/FRRouting/frr/pull/5653
was merged. Due to some nessesary lines are not presented.
When bgpd receives multi update message with same service-sid on
prefix-sid type-5 attribute, bgpd will crash arround path-attribute's
values object reference count.
And also, this commit add a topotest to check that feature work fine.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Just for more debug information regarding malformed aggregator_as.
```
bgpd[5589]: [EC 33554434] 192.168.10.25: AGGREGATOR AS number is 0 for aspath: 65030
bgpd[5589]: bgp_attr_aggregator: attributes: nexthop 192.168.10.25, origin i, path 65030
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Avoid mangling packet size which is expected to be the same as received.
Stream pointer advancing is necessary to avoid changing the packet and
reseting BGP sessions.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
An UPDATE message that contains the AS number of zero in the AS_PATH
or AGGREGATOR attribute MUST be considered as malformed and be
handled by the procedures specified in [RFC7606].
An UPDATE message with a malformed AGGREGATOR attribute SHALL be
handled using the approach of "attribute discard".
Attribute discard: In this approach, the malformed attribute MUST
be discarded and the UPDATE message continues to be processed.
This approach MUST NOT be used except in the case of an attribute
that has no effect on route selection or installation.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
