log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Revert "ospf6d: fix decimal area ID cli"
commit a27cb3cfe9
Revert "bgpd: add back unicast option to 'address-family vpnv(4&6)' Issue #459"
commit 399598bf6b
Revert "Fix the memory leak"
commit d8d58e9839
Revert "zebra: 'no ip route 4.1.1.19 255.255.255.255 99' is ambiguous"
commit 83f3561935
Revert "ospf6d: Allow unconfig of unknown lsa's"
commit 5b0747d71d
Revert "Fix the "Dead assignment" of clang SA."
commit 3a6570a1f1
Revert "snapcraft: Improve README.usage.md based on feedback received"
commit 2a3a819a9c
Revert "zebra: stop deregistering static nexthops unless removing the static"
commit 1dac3a9619
All of these changes do not apply on stable/3.0 due to either CLI
changes or another fix already being present.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Sometimes, like once every 400 iterations, when you restart
Quagga, extended-nexthop has been turned off for interface
based config( for 5549 ).
Examining the code, there is only 1 real path to setting
the PEER_FLAG_CAPABILITITY_ENHE and that is through
peer_conf_interface_get. Modify this code path
to always set the PEER_FLAG_CAPABILITY_ENHE if it is
not already set.
In addition, fix a possible pointer dereference.
Ticket: CM-12929
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
If you did:
neighbor swp1 interface
neighbor swp1 interface remote-as external
we would not set the remote-as. You could however still do
neighbor swp1 remote-as external
Sometimes, like once every 400 iterations, when you restart
Quagga, extended-nexthop has been turned off for interface
based config( for 5549 ).
Examining the code, there is only 1 real path to setting
the PEER_FLAG_CAPABILITITY_ENHE and that is through
peer_conf_interface_get. Modify this code path
to always set the PEER_FLAG_CAPABILITY_ENHE if it is
not already set.
In addition, fix a possible pointer dereference.
Ticket: CM-12929
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem uncovered with crash when entering the command "show ip bgp
vrf vrf1001 0.0.0.0". The crash was caused by a mistake incrementing
the index value in the vrf/view case. Manual testing completed and
failing test case now passes successfully.
Ticket: CM-16223
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed By: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes two crashes:
1) When we enter a 'neighbor shutdown..' command for a peer
group or interface based peer we were not properly looking
up the peer.
2) When we we enter 'no neighbor shutdown..' command for
a peer group or interface based peer we were not properly
lookup up the peer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'show ip bgp neighbors swp31s0' command was not
working properly. This fixes that issue.
This command still has issues that need to be investigated
but for the moment this gets the command working in the
form that is needed. More rework can come.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the 'show ... bgp ... summary' command when you are
looking at a afi( with no safi specified ) to only display
output for those safi's that have been configured.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The use of VTY_DECLVAR_CONTEXT(bgp, bgp) here is wrong as we are not
inside the "router bgp" configuration node. This was making the clear
commands always fail with a "Current configuration object was deleted
by another process" error, which doesn't make any sense.
Also, the bgp_clear() function will already check for us if the given
peer-group or neighbor exists or not, there's no need to duplicate this
logic here.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When starting up bgp and zebra now, you can specify
-e <number> or --ecmp <number>
and that number will be used as the maximum ecmp
that can be used.
The <number specified must be >= 1 and <= MULTIPATH_NUM
that Quagga is compiled with.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The introduction of AFI_L2VPN prefix makes usage of AFI_ETHER deprecated
and is of no usage currently. The former replaces the latter one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Added the possibility to enter in evpn address-family in bgp node, by
using 'address-family l2vpn evpn' command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introduction of EVPN address-family node that is reachable under
BGP node, like follow: address-family evpn. Under that node, only
some commands are available for configuring a neighbor or setting
some basic settings like attribute unchanged behaviour. Currently,
no vty command is available for setting NLRI entries for EVPN.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
dn_flag was tested inside of a 'use_json' block
further down in the function. Move initialization
of the value to outside of the !use_json if statement
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit 713de0685f.
During Discussions with Lou, it was decided that his code
changes would handle this part, and my code changes would
fix up vtysh and bgp to be in sync again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The behavior of some show commands was switched from
showing the unicast data to all safi data. This
is a change in behavior and needs to be put
back for 2.0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
extract.pl.in requires the lines that are ignored
to be consisten with what is in the *.c file
that we are ignoring from, else we get ambiguous
commands.
This allows vtysh to enter address-family sub mode
in bgp again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
